Page 2 - English
English All Rights Reserved. Acer LCD Monitor User GuideOriginal Issue: 12/2013 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplement...
Page 3 - Information for your safety and; Safety instructions; Cleaning your monitor
iii English Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indic...
Page 4 - Accessibility; Warnings; Using electrical power
iv English Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To pr...
Page 5 - Product servicing
v English power company. • Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the ext...
Page 6 - Potentially explosive environments; Additional safety information
vi English Potentially explosive environments Switch off your device in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas coul...
Page 7 - LCD pixel statement; Tips and information for comfortable use; Finding your comfort zone
vii English LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enab...
Page 8 - Taking care of your vision
viii English Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrai...
Page 9 - Declaration of Conformity; Acer Incorporated; Year to begin affixing CE marking: 2017.
Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Product: LCD Monitor Trade Name: ACER (“x” = 0~9, a ~ z, A ~ Z, o...
Page 10 - Contents
Contents English Information for your safety and comfort iii Safety instructions iii Special notes on LCD monitors iii Cleaning your monitor iii Accessibility ivSafe listening iv Warnings ivUsing electrical power iv Product servicing v Potentially explosive environments vi Additional safety informat...
Page 11 - Troubleshooting
English Setting Menu Information Menu VGA Mode 12 13 Troubleshooting 1 6 14
Page 12 - Unpacking
1 English Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide D-sub cable AC Power cord
Page 14 - Screen position adjustment; Power saving; Connecting Power cord
3 English Screen position adjustment To optimize the viewing position, you can adjust the monitor tilt, using both of your hands to hold the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees down. • Check first to make sure that the power cord you use is the correct typ...
Page 15 - Connector pin assignment; 5-pin color display signal cable
4 English Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported...
Page 16 - Standard timing table
English Standard timing table 5 No. Mode Resolution Refresh Rate 1 VGA 640×480 60 Hz 2 Hz 3 Hz 4 Hz 5 Hz 6 Hz 7 Hz 8 Hz 9 Hz 10 Hz 11 Hz 12 Hz 13 Hz 14 Hz VGAVGAMACVESASVGASVGASVGASVGAMACXGAXGAXGAMAC 15 Hz 16 Hz 17 Hz 18 Hz VESAVESAWXGAWXGA+ 640×480640×480640×480 66.66 60 60 606060 7275 7056 727574....
Page 17 - Installation; Steps; In order to prevent damage to the monitor, do not lift the monitor; by
English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off.b Connect the VGA video cable to the computer. grounded, AC outlet. 3 Turn on the monitor and computer Turn on th...
Page 18 - Users controls; Panel Controls; No. Item Description
English Users controls 5 4 3 2 1 Panel Controls No. Item Description 1 Power button/Indicator •Turn the monitor on/off •Blue indicates power on , Amber indicates standby/power saving mode 2 Input/ > button • When function menu display, press this button to switch input signal source (Optional) •W...
Page 19 - Using the Shortcut Menu
English Using the Shortcut Menu Press any of the function buttons (Empowering Key, Auto button, or Menu button) to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Icon Item Description Empowering Press the Empowering Key to open the Acer eColor ...
Page 20 - Acer eColor Management; Operation instructions
English Acer eColor Management Operation instructions 1 Press the Empowering Key to open the Acer eColor Management OSD menu and access the scenario modes. 2 Press the < / > button to select the desired mode. 3 Press the Features and benefits Icon Mode type Description User mode User-defined. ...
Page 21 - Using the OSD Menus; Picture Menu
English 10 Using the OSD Menus Note: The following content is for general reference only. Actual product specifications may vary. Your LCD monitor is equipped with an on-screen display (OSD) menu for making various adjustments and settings. Press the Menu button to open the OSD menu. You can use the...
Page 22 - OSD Menu
English OSD Menu The OSD menu is used for adjusting the OSD menu location and the timeout setting. 1 Press the Menu button to bring up the OSD menu. 2 Press the < / > button to select OSD and press the Menu button to enter the OSD menu. 3 To adjust the OSD H.Position / V.Position, press the Me...
Page 23 - Setting Menu
English Setting Menu The Setting menu is used for adjusting the general settings for current input signal such as aspect ratio, OSD language, and etc. 1 Press the Menu button to bring up the OSD menu. 2 Press the < / > button to select Setting and press the Menu button to enter the Setting men...
Page 24 - Information Menu
English Information Menu The Information menu displays the basic information of the LCD monitor. 1 Press the Menu button to bring up the OSD menu. 2 To view the basic information of the LCD monitor, press the < / > button to select Information . 13 Information S/N: MMT2CCN0014340DD003B00 1600x...
Page 25 - VGA Mode
English Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA Mode Problem LED status Remedy No picture visible Blue Using the OSD menu, adjust brightness and contrast to maximum or reset to their d...
