Page 3 - iii; Information for your safety and; Turning the product off before cleaning
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid clea...
Page 4 - iv; Using electrical power
iv • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type...
Page 7 - vii; Caution for Listening; Disposal instructions
vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level after your ears have adjusted. • Do not listen to music at high volumes for extended periods. • Do not increase...
Page 8 - viii; First things first; Usage Notes; Precautions
viii First things first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings ...
Page 9 - Contents
Information for your safety and comfort iii First things first viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 5 Remote Control Layout 6 MHL (Mobile High-Definition Link) Control 8 Getting Started 10 C...
Page 10 - Regulations and safety notices
Troubleshooting 30 LED & Alarm Definition Listing 34 Cleaning and replacing the dust filters (Option) 35 Replacing the Lamp 36 Ceiling Mount Installation 38 Specifications 41 Compatibility modes 43 Regulations and safety notices 48
Page 11 - English; Introduction; Product Features
1 English Introduction Product Features This product is a single-chip DLP ® projector. Outstanding features include: • DLP ® technology • X1126H/D506D/EV-S57H/V26S/AS600/DSV1610 series: 800x600 SVGA resolution X1226H/D516D/EV-X57H/V26X/AX600/DNX1609 series: 1024x768 XGA resolution X1326WH/D526D/EV-W...
Page 12 - Package Overview
2 En gl ish Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable Security card (option) User’s guide (option) Quick start guide Carrying case (option) Du...
Page 13 - Projector Overview; Projector Outlook
3 English Projector Overview Projector Outlook Front / upper side # Description # Description 1 Air outlet 7 Lamp cover 2 Focus ring 8 Lens cap 3 Zoom ring 9 Projection lens 4 Remote control receiver 10 Tilt adjusting wheels 5 Power button 11 Air inlet 6 Control panel 6 3 2 4 7 5 10 11 8 9 1
Page 15 - Control Panel
5 English Control Panel Note: Functions vary depending on model definition. # Icon Function Description 1 POWER POWER Power Indicator LED 2 LAMP LAMP Lamp Indicator LED 3 TEMP TEMP Temp Indicator LED 4 POWER See the contents in "Turning the Projector On/Off" section. 5 Four directional selec...
Page 16 - Remote Control Layout
6 En gl ish Remote Control Layout # Icon Function Description 1 Infrared transmitter Sends signals to the projector. 2 POWER Refer to the "Turning the Projector On/Off" section. 3 MUTE To turn on/off the volume. 4 RATIO To choose the desired aspect ratio. 5 Select/Enter Confirm your selectio...
Page 20 - Getting Started; Connecting the Projector
10 En gl ish Getting Started Connecting the Projector Note 1: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note 2: Functions vary depending on model definition. Note 3: USB cable needs powered extender if the...
Page 21 - Turning the Projector On/Off; Turning on the Projector
11 English Turning the Projector On/Off Turning on the Projector 1 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 2 Turn on the projector by pressing " Power " button on the control panel or remote control, and the Power indicator ...
Page 22 - Turning the projector off
12 En gl ish Turning the projector off 1 To turn the projector off, press and hold the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn RED and blink rapidly after the...
Page 23 - Adjusting the Projected Image; Adjusting the Height of Projected Image
13 English Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel
Page 24 - How to optimize image size and distance
14 En gl ish How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • SVGA/XGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes ...
Page 26 - How to get a preferred image size by adjusting
16 En gl ish How to get a preferred image size by adjusting distance and zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • SVGA/XGA series To obtain an image size of 60" set the projector at a distance 2.4 m and 2.6 m from the scr...
Page 28 - User Controls; Installation menu
18 En gl ish User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size ...
Page 30 - Color
20 En gl ish Color LumiSense Acer LumiSense technology can intelligently optimize the projection images to the most comfortable visual lumens automatically based on display content. The feature greatly enhances dark detail visibility and color saturation. • Off: Default setting. • Normal: Select ...
Page 32 - Image
22 En gl ish Image Projection Mode • Front: The factory default setting. • Rear: Reverses the image so you can project from behind a translucent screen. Projection Location • Auto: Automatically adjusts projection location of image. • Desktop • Ceiling: Turns the image upside down for ceiling-mounte...
Page 34 - Setting
24 En gl ish Setting Source Selection Manual by source menu, Auto by Smart Detection. Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This functio...
Page 37 - Management
27 English Management Note: Functions vary depending on model definition. ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. <Note> Gray out ECO mode item while either Lum...
Page 38 - Audio
28 En gl ish Audio Note: Functions vary depending on model definition. 3D Note 1: It needs correct settings on graphic card 3D application program for correct 3D display. Note 2: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download the...
Page 40 - Appendices; Troubleshooting; Image Problems and Solutions
30 En gl ish Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears onscreen • Con...
Page 44 - LED & Alarm Definition Listing; LED Messages
34 En gl ish LED & Alarm Definition Listing LED Messages Message Lamp_LED Temp_LED Power LED Red Red Red Blue Input power plug Flash ON to OFF 100ms Flash ON to OFF 100ms Flash ON to OFF 100ms -- Standby -- -- ON -- Power button ON -- -- -- ON Lamp retry -- -- -- Quick Flashing Power off (Coolin...
Page 45 - Cleaning and replacing the dust filters (Option)
35 English Cleaning and replacing the dust filters (Option) Cleaning the dust filtersClean the dust filters after every 1000 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Foll...
Page 46 - Replacing the Lamp
36 En gl ish Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!" Wh...
Page 48 - Ceiling Mount Installation
38 En gl ish Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structural ceiling member, and secure the ceiling mount base to the ceiling. 2 Choose the length combination based on actual environme...
Page 51 - Specifications
41 English Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system DLP ® Resolution • X1126H/D506D/EV-S57H/V26S/AS600/DSV1610 series: 800x600 SVGA resolution • X1226H/D516D/EV-X...
Page 53 - Compatibility modes; VGA Analog - PC Signal
43 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.5 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 SVGA 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 ...
Page 54 - VGA Analog - Extended Wide timing
44 En gl ish 2 VGA Analog - Extended Wide timing 3 VGA Analog -Component Signal B. HDMI Digital 1 HDMI - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 60 47.8 1280x768 75 60.3 1280x768 85 68.6 1280x720 60 44.8 1280x720 120 92.9 1280x800 60 49.6 1280x800 119.909 101.6 19...
Page 55 - HDMI - Extended Wide timing
45 English 2 HDMI - Extended Wide timing 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 77.4 XGA 1024x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 99.0 SXGA 1152x864 70 63.8 1152x864 75 67.5 1152x864 85 77.1 1280x1024 60 64.0 1280x1024 72 7...
Page 59 - Remarque à l'intention des utilisateurs canadiens
49 En gli sh English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and othe...
Page 60 - of Conformity
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.a...
