Page 2 - FCC Class B Radio Frequency Interference Statement
1 Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digit...
Page 3 - PRECAUTIONS
2 PRECAUTIONS z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Us...
Page 5 - INSTALLATION INSTRUCTIONS; SWIVEL BASE; IVEL BASE; POWERCORD
4 INSTALLATION INSTRUCTIONS SWIVEL BASE IVEL BASE Install Remove Figure 1 Installing and Removing the Swivel Base POWERCORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in ei...
Page 7 - ADJUSTING THE VIEWING ANGLE; NOTES
6 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle f...
Page 8 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; The power cord should be connected.
7 OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be con...
Page 10 - HOW TO ADJUST A SETTING
9 HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. To exit and save, sel...
Page 11 - ADJUSTING THE PICTURE
10 ADJUSTING THE PICTURE The descriptions for function control LEDS Main Menu Icon Sub Menu Icon Sub Menu Item Description Contrast Adjusts the contrast between the foreground and background of the screen image. Brightness Adjusts the background brightness of the screen image. Focus Adjusts picture ...
Page 13 - PLUG AND PLAY; Plug & Play DDC2B Feature
12 PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capab...
Page 14 - *Computer Power Switch should be in
13 TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Ch...
Page 15 - temperature; Horizontal or vertical disturbances on; the screen
14 Screen image is not centered or sized properly. *Adjust pixel frequency (CLOCK) and FOCUS or press hot-key (AUTO) Picture has color defects (white does not look white) *Adjust RGB color or select color temperature Horizontal or vertical disturbances on the screen *Use win 95/98 shut-down mode Adj...
Page 17 - Viewable angle
16 APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 17" Pixel pitch 0.255mm( H ) × 0.255mm( V ) Brightness 250cd/m 2 (Typical) Contrast 700:1 (Typical) Viewable angle 140° (H) 130° (V) Response time 8 ms R,G,B Analog Interface Video H-Frequency 55.469kHz – 70.635kHz Input V-Fr...
Page 18 - Regulatory Compliance
17 Switch • Auto Adjust Key • Power Button • MENU External Controls: Functions • Contrast • Brightness • Focus • Clock • H.Position • V.Position • Language • DDC/CI ON/OFF • (Warm) Color • (Cool) Color • RGB Color temperature • Reset • OSD position . timeout • Display information • Exit Power Consum...
Page 19 - Preset Display Modes
STANDARD RESOLUTION HORIZONTAL FREQUENCY(KHz) VERTICAL FREQUENCY(KHz) 640x480 31.469 59.940 640x480 37.861 72.809 VGA 640x480 37.500 75.000 800x600 35.156 56.250 800x600 37.879 60.317 800x600 48.077 72.188 SVGA 800x600 46.875 75.000 1024x768 48.363 60.004 1024x768 56.476 70.069 XGA 1024x768 60.023 7...
Page 20 - CONNECTOR PIN ASSIGNMENT
19 1 5 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Logic Ground 3. Blue 11. Monitor Ground 4. Monitor Ground 12. DDC-Serial Data 5. DDC-return 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground CONNECTO...
