Page 2 - English
English Copyright © 2017. Acer Incorporated. All Rights Reserved. Acer LCD Monitor User Guide Original Issue: 10/2017 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new...
Page 3 - Information for your safety and; Safety instructions; Special notes on LCD monitors; Cleaning your monitor
English Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate ...
Page 5 - Warning! The grounding pin is a safety feature. Using a power outlet; Product servicing
English • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the f...
Page 6 - Potentially explosive environments; Disposal instructions
English Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Potentially explosive environments Swi...
Page 8 - Developing good work habits
English Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Ey...
Page 9 - Declaration of Conformity
English Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +3...
Page 10 - Federal Communications Commission
English Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including inter...
Page 11 - Information for your safety and comfort; IT Equipment Recycling Information; Unpacking 1; Attaching the base (for selected models); Standard timing table; Contents
English Information for your safety and comfort iii Safety instructions iii Special notes on LCD monitors iii Cleaning your monitors iii Accessibility iv Safe listening iv Warnings iv Using electrical power iv Product servicing v Potentially explosive environments vi Additional safety information vi...
Page 12 - Unpacking
English Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide USB cable (Optional) USER GUIDE DP Cable (Optional) HDMI1.4 cable (Optional) AC P...
Page 13 - SCREEN POSITION ADJUSTMENT; Height Adjustment
English SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the height/tilt of the monitor. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 2 1 120mm • Tilt Please see the illustration below for an example ...
Page 14 - Swivel
English • Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. 45° 45° • Monitor Pivot Before rotating the display,lift it to the top position and then push it back to the utmost degree. Rotate clockwise or counter-clockwise until the monitor stops at...
Page 15 - Connecting the adapter and AC Power cord; Power saving
English Connecting the adapter and AC Power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required. • ...
Page 16 - 0-pin color display signal cable
English Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported r...
Page 17 - 9-pin color display signal cable; 5-pin color display signal cable
English 19-pin color display signal cable PIN No. Description PIN No. Description 1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2- 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1- 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0- 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock- 13 CEC 14 Reserved (N.C...
Page 19 - Installation
English Installation 1. Turn off your computer and unplug your computer's power cord. 2. Connect the signal cable to the VGA and /or HDMI1.4 (optional) and /or DP (optional) input socket of the monitor, and the VGA and /or HDMI1.4 (optional) and /or DP (optional) output socket of the graphics card o...
Page 20 - User Controls; External controls
English User Controls 1 23 4 5 External controls 1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode. 2 Function key / a. Press to view Main page. Press again to enter hotkey1 function. b. When the Function Menu is active, press this key to vie...
Page 21 - Using the Shortcut Menu
English Using the Shortcut Menu ------------------------------------------------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settin...
Page 22 - Selecting the input; Main menu; Picture
English Selecting the input Open the Input control and select VGA IN, HDMI1.4, DP or Auto Source. When you are done, press the joystick to exit current page and store. Input HDMI Auto Source On OK Move Exit Input Main menu 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or do...
Page 23 - Color
English 2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Toggle to the left or right to adjust the sliding scales.4. The Picture menu can be used to adjust the Brightn...
Page 24 - Audio
English 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Toggle to the left or right to adjust the sliding scales.4. Gamma mode al...
Page 25 - Performance; OSD
English Performance Mode - Standard OSD System Picture Color Over Drive Audio Normal Off Adaptive Sync Enter Move X Performance Off Refresh Rate Num 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to the right to navigate to the...
Page 26 - System
English 7. OSD Lock: To choose OSD lock on/off. Note: OSD Locked: • Set the OSD Lock to "On" by the OSD option and press "Enter" to execute the All Key lock function. • The "OSD Locked" message will be displayed in the middle of the screen. • LED lights will be changed from b...
Page 28 - Troubleshooting; Problem
Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA IN/HDMI1.4/DP Mode (Optional) Problem LED status Remedy No picture visible Blue Using the OSD menu, adjust brightness and contrast to maximum or...
