Acer AL2032W - Manuals - manualsarea.com

Page 2 - NOTES

2 Precautions The monitor may be damaged if placed too near a source of heat. Be aware of the location of radiators, cookers, open fires etc. Do not cover the slots and openings on the back or top of the cabinet as the monitor requires ventilation. The monitor should be located in a well-ventilated ...

Page 3 - Package contents; LCD Monitor; Installation instructions; Assembling the Monitor; Put the monitor on flat table or plate.

3 Package contents LCD Monitor Power Cord Audio Cable VGA Cable AC/DC Adapter User Manual (CD) Quick Start Guide Installation instructions Assembling the Monitor 1. Put the base of monitor on the desk carefully. 2. Put the monitor on flat table or plate.

Page 4 - Unplug the power cord to make sure the power is off.; Important; The viewing angle of the monitor ranges from

4 Repackage the Monitor Save the original box and packing material in case you have to ship or transport the monitor. Repackage the monitor: 1. Unplug the power cord to make sure the power is off. 2. Put the monitor into carton carefully. Important To find a clean and flat surface table place the mo...

Page 5 - Connecting the Devices; Caution; With power cord; WARNING; The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure; Switching the Power

5 Connecting the Devices Caution : Make sure that the computer and the monitor are both disconnected from the power supply. AC/DC Adapter With power cord Connect the plug of the AC/DC adapter to the (DC IN ) socket of the monitor , then be insert the power cord into the adapter and a properly ground...

Page 6 - Adjusting display settings; External Controls; POWER

6 Adjusting display settings External Controls ○ 1 POWER Power on/off Blue: power on Orange: in sleep mode ○ 2 OSD Function Press to view OSD. Press again to enter a selection in OSD. ○ 3 UP/ PLUS If OSD is active, press to select or adjust OSD options. If OSD is inactive, press once, then press the...

Page 7 - OSD options; OSD Menu

7 OSD options Please refer to "External Controls" on Page 6. To adjust the OSD settings: 1. Press the MENU button to open the OSD main menu. 2. Use the buttons marked or , to select the menu option you want. 3. P ress MENU button to highlight a control, and then press or to adjust the option...

Page 8 - Audio; Adjusts the volume.; Options; Recall to default settings.; Settings

8 Audio Volume: Adjusts the volume. Mute : on /off Options Auto Config. : System runs auto-configuration. Wide mode : Wide / Normal Information: This shows brief information on the screen. Reset: Recall to default settings. Settings OSD H. Position OSD V. Position OSD Time-out This changes the posit...

Page 9 - Troubleshooting; Problems

9 Troubleshooting Problems Possible Solutions Power LED is not ON • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. No Picture • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. • Ensure the video ca...

Page 10 - General specifications; Item; LCD Panel

10 General specifications Item Specification LCD Panel Display 20.1-inch Flat panel active-matrix TFT LCD Max resolution WSXGA+ 1680×1050 pixels Pixel Pitch 0.258 mm Color 16.7M Brightness 300 cd/m² (Typical) Contrast Ratio 600:1 (Typical) Response Time 16ms (Typical) View Angle of Horizontal 89° / ...