Abocom LA100 - Manuals - manualsarea.com

Page 2 - HARDWARE INSTALLATION; Locate the PCMCIA slot of your system.

HARDWARE INSTALLATION 1. Locate the PCMCIA slot of your system. 2. Align the PCMCIA Fast Ethernet Attached Port PC Card toward the PCMCIA slot. Push evenly and steadily until it is seated. 3. Connect the attached RJ-45 port with an Ethernet Hub/Switch. 4. You are now ready to continue the software i...

Page 3 - LED Indicators

LED Indicators • 100M/FULL: grows orange at 100 Mbps, green at FULL duplex. • LINK/RX: grows green when connected to the network, blinks green when receiving datum. • POWER/TX: grows green when power is on, blinks green when transmitting datum. 10 0M / F U LL Li nk /R X PO W ER / T X - 2 -

Page 4 - SOFTWARE INSTALLATION; OK

SOFTWARE INSTALLATION Windows NT 3.51 1. In Main Group of NT 3.51, open Control Panel and click on Network icon. 2. In Network Settings dialog box, push Add Adapter ... button. The Add Network Adapter dialog box will appear. 3. Choose <Other> requires disk from manufacturer from the network ad...

Page 7 - Floppy disk drives; Network

5. Windows will prompt a ADD NEW HARDWARE WIZARD dialog box. In this time, select Floppy disk drives and please insert driver diskette. Then press Next , the driver will be installed and you may be asked for the original Windows 98 CD/disks. 6. For the first time installation, please click Network i...

Page 9 - Floppy disk; and please insert driver diskette. Then; Next; , the driver will be installed and you

5. Windows will prompt a Locate Driver Files dialog box. In this time, select Floppy disk drives and please insert driver diskette. Then press Next , the driver will be installed and you may be asked for the original Windows 2000 CD/disk. - 8 -

Page 10 - Installation for Windows Workgroup 3.11

6. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. 7. Reboot the machine and the card will be fully functional. Installation for Windows Workgroup 3.11 NDIS3 Driver for Workgroup 1. Click on " Network Setup " ico...

Page 11 - NDIS2 Driver for Workgroup

installation and exit Windows. 9. Run INSTALL.EXE from driver diskette's root directory. 10. Select " Windows for Workgroup " in " Network Operating Syste m" screen and enter " Driver Install " screen. 11. If current settings are acceptable, select " Start Installation &#...

Page 13 - ODI Driver for Workgroup

Back to step 11. 13. Select " NDIS Server(LAN Manager, ...)" as the network server you will attach to and press Enter key. 14. Installation program starts copying related files from diskette to the destination directory and modifies AUTOEXEC.BAT and NET.CFG under user's agreement. 15. Instal...

Page 17 - Other Drivers

backup by a NetWare server running software such as SBACKUP? (Y/N): No 7. Answer accordingly and provide a path if necessary. 8. Select a driver for your network board. 9. From the driver list, select " Other Drivers ". 10. Go to the Insert the Driver Disk dialog box and specify the path whe...

Page 18 - MS LAN Manager; Microsoft LAN

performs the following: SET NWLANGUAGE=ENGLISH --Set NetWare 4.X to English language LSL --Link Support Layer Module provided by Novell LE100ODI --Hardware Specific Module IPXODI --IPX Protocol Stack Module provided by Novell VLM --DOS Support Module provided by Novell F: --Change to connected devic...