3M 78-0013-4441-1-D - Manuals

Page 2 - One Pass Mini Fiber Pathway; Contents

2 78-0013-4441-1-D 3M ™ One Pass Mini Fiber Pathway Contents 1.0 System Overview ............................................................................................................................ 3 2.0 Components and Accessories ................................................................

Page 3 - installer; Components and Accessories

78-0013-4441-1-D 3 3M ™ One Pass Mini Fiber Pathway 1.0 System Overview The One Pass Mini Fiber Pathway is designed for use in FTTP (Fiber-to-the-Premise) networks within brownfield or greenfield Multi Dwelling Units (MDUs). The One Pass Mini Fiber Pathway is a surface-mount, adhesive-backed drop ca...

Page 4 - Additional Recommended Tools (Not Included); Wall Surface Compatibility; Wall Surface Compatibility Test Procedure

4 78-0013-4441-1-D 3M ™ One Pass Mini Fiber Pathway 3.2 ILU installation tools are wear items, and should be replaced on a bi-annual basis, or approximately every 500 installed units. Sooner as required. 3.3 Additional Recommended Tools (Not Included) A B D E F C G H a) Drillb) Stapler c) Splicer’s ...

Page 5 - Test Weight Hang Time; Routing the Duct; • The adhesive is permanent. Removing the duct after

78-0013-4441-1-D 5 3M ™ One Pass Mini Fiber Pathway 4.3 Hang weight from strip. Release tab Tab hole 4.4 Remove successful test strips by pulling on release tab Test Weight Hang Time Result > 60 seconds PASS – Install < 60 second FAIL – Do not install The path the duct will follow MUST be clea...

Page 6 - • Do not remove duct from box. Route end through handle; Exposing Fiber For Termination; duct before terminating using the following method:; Twist the section to be removed 180°.; Wall Outlet Installation

6 78-0013-4441-1-D 3M ™ One Pass Mini Fiber Pathway • Do not remove duct from box. Route end through handle as shown and pay off duct. 6.0 Exposing Fiber For Termination Expose 2-4' (610-1220 mm) of fiber from the end of the duct before terminating using the following method: 6.1 Snip the flange on ...

Page 7 - DO NOT ROUTE the 900 μm fiber into the outlet box until; Duct Installation; Installation Tool; • The reference surface guides should maintain contact; surface; Exterior and Interior Corner Installation

78-0013-4441-1-D 7 3M ™ One Pass Mini Fiber Pathway 7.3 After exposing appropriate length of fiber for termination, attach duct by aligning the end of the duct with the recessed area in the base. Remove the liner and press firmly into place. DO NOT ROUTE the 900 µm fiber into the outlet box until in...

Page 8 - Planar Corner Installation

8 78-0013-4441-1-D 3M ™ One Pass Mini Fiber Pathway 10.0 Planar Corner Installation 10.1 Peel adhesive liners and attach support in duct path. Marking grooves Mark flange at groove Leave 12" (300 mm) of liner intact 10.2 Trim the duct flange using the 3M ™ One Pass Mini Duct Flange Removal Tool....

Page 9 - Mechanical Anchor Installation; Height From Wall; Wall Cover Installation

78-0013-4441-1-D 9 3M ™ One Pass Mini Fiber Pathway 11.0 Mechanical Anchor Installation 11.1 Remove liner, align groove with duct and press firmly into place. The anchor may be secured with a T-25 staple if desired. T-25 Staple here (optional) • Use the adhesive-backed anchor wherever additional adh...

Page 10 - Connector Termination and Final Steps

10 78-0013-4441-1-D 3M ™ One Pass Mini Fiber Pathway 14.0 Connector Termination and Final Steps 14.1 Terminate the fiber using a 3M ™ No Polish Connector or 3M ™ Crimplok+ Connector. Anchor furcation tubing Feed through from living unit 3M ™ One Pass Point-of-Entry Box (Hallway Side) 14.2 In buildin...

Page 11 - Window Cut Tool

78-0013-4441-1-D 11 3M ™ One Pass Mini Fiber Pathway 15.0 Fiber Repair 15.1 Ensure that the root cause for service interruption is damaged 900 µm. 15.2 Working away from the Wall Outlet, make small window cuts using the Window Cut Tool at every other corner or turn. Note: Additional window cuts at o...

Page 12 - Important Notice; M MAKES NO OTHER

3M and ScotchBlue are trademarks of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it a...