3M 78-0013-4441-1-D - Manual
3M 78-0013-4441-1-D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – One Pass Mini Fiber Pathway; Contents
- Page 3 – installer; Components and Accessories
- Page 4 – Additional Recommended Tools (Not Included); Wall Surface Compatibility; Wall Surface Compatibility Test Procedure
- Page 5 – Test Weight Hang Time; Routing the Duct; • The adhesive is permanent. Removing the duct after
- Page 6 – • Do not remove duct from box. Route end through handle; Exposing Fiber For Termination; duct before terminating using the following method:; Twist the section to be removed 180°.; Wall Outlet Installation
- Page 7 – DO NOT ROUTE the 900 μm fiber into the outlet box until; Duct Installation; Installation Tool; • The reference surface guides should maintain contact; surface; Exterior and Interior Corner Installation
- Page 8 – Planar Corner Installation
- Page 9 – Mechanical Anchor Installation; Height From Wall; Wall Cover Installation
- Page 10 – Connector Termination and Final Steps
- Page 11 – Window Cut Tool
- Page 12 – Important Notice; M MAKES NO OTHER
3M
™
One Pass Mini Fiber Pathway
Installation Instructions
December 2012
78-0013-4441-1-D
3
The Network of Networks.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 78-0013-4441-1-D 3M ™ One Pass Mini Fiber Pathway Contents 1.0 System Overview ............................................................................................................................ 3 2.0 Components and Accessories ................................................................
78-0013-4441-1-D 3 3M ™ One Pass Mini Fiber Pathway 1.0 System Overview The One Pass Mini Fiber Pathway is designed for use in FTTP (Fiber-to-the-Premise) networks within brownfield or greenfield Multi Dwelling Units (MDUs). The One Pass Mini Fiber Pathway is a surface-mount, adhesive-backed drop ca...
4 78-0013-4441-1-D 3M ™ One Pass Mini Fiber Pathway 3.2 ILU installation tools are wear items, and should be replaced on a bi-annual basis, or approximately every 500 installed units. Sooner as required. 3.3 Additional Recommended Tools (Not Included) A B D E F C G H a) Drillb) Stapler c) Splicer’s ...
