3M 5797A-MT - Manuals

5 78-8126-0432-6-A 3.0 Place Components on Cable 3.1 Slide one large cold shrink jacket tube onto Cable X and one onto Cable Y with the loose core ribbon ends going on the cable last, extending toward the cable ends. 3.2 Slide a 3M ™ cold shrink splice body onto each core of Cable X with the loose c...

9 78-8126-0432-6-A 6.0 Install Splice Jacket 6.1 Over wrap the exposed conductors on each side ofsplice bodies with jacket pieces saved from step 2.1. Bind the cable jacket pieces in place with one half-lapped layer of Scotch ™ 88, 1 1/2" wide tape. 6.2 At both ends of splice, apply four wraps o...

10 78-8126-0432-6-A 88 vinyl tape Armorcast ™ wrap 2229 mastic tape 6.5 Apply two half-lapped layers of 4" wide 2229 tapeover applied vinyl tape in splice center. Overlap endsof Cold Shrink jacket tubes 2" (51 mm). 6.6 Cover the applied 2229 mastic with two half lapped layers of 88 tape. 6.7...