3Com LANplex 2500 - Manuals

3Com LANplex 2500 – Manual in PDF format online.

Manuals:

Manual 3Com LANplex 2500

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Safety Information; Do not touch the components, pins, leads, or solder connections; Prior to Installation; Read if initial; Installing the; When handling modules, 3Com recommends that you always use; Faceplate; Captive screw

Safety Information Electrostatic discharge (ESD) can damage components on the module. ESD occurs when the module is improperly handled and can cause complete or intermittent failures. To prevent ESD-related damage: ■ Always wear the ESD wrist strap provided with the LANplex system, ensuring that it ...

Page 3 - Read if adding or; You can add or replace a module while the system is powered on.

WARNING: If the system is powered on when you are installing the module, do not insert any metal objects into the open slot (for example, a screwdriver or a finger with jewelry). This could cause burns or other bodily harm. 3 Place the module between the guides of the selected slot and slide the mod...

Page 4 - Troubleshooting the System

The LANplex system will automatically reset when a module has been installed with the power on. If you physically change the configuration of the system after defining an IP interface, the port designated for that interface may no longer be valid. You may have to redefine the interface. For informat...

3Com Manuals