3Com iQ 10PC - Manuals - manualsarea.com

Page 10 - The following optional flying kit is available:; Skeletal Flying

The iQ 10 & iQ 10P is supplied as a ‘skeletal’ design loudspeaker, which can be used both indoors and out due to it’s weatherproof exterior. As it is compact and lightweight, it can easily be flown into tight corners and small spaces. The iQ 10C & iQ 10PC are built into plywood cabinets that...

Page 11 - SECUR – ET VPC; Pole Clamp; Description Quantity; VPC Pole Clamp; only

SECUR – ET VPC Pole Clamp SECUR ET – VEB Eyebolt Description Quantity VPC Pole Clamp 1 M10 Washer 1 M10 x 50mm Screw 1 M10 Nyloc Nut (Black) 1 The Tannoy iQ 10C & iQ 10PC loudspeakers can be flown with high quality VEB M10 eyebolts with collar to BS4278:1984. The loudspeakers are equipped with i...

Page 12 - SINGLE iQ SUSPENSION TRUSS (By ATM; Optimized fixed splay angle; iQ Suspension Truss

SINGLE iQ SUSPENSION TRUSS (By ATM ™ ) The iQ suspension truss is an economical solution to suspending a single purpose loudspeaker array from two or three fixed structural attachment points. The iQ Suspension Truss is designed to hold the loudspeakers at the optimum splay angle to optimize cluster ...

Page 13 - Typical Suspension Truss applications –

Typical Suspension Truss applications – 2 x iQ 10C 13 2 x iQ 10C & 2 x iQ 18B

Page 14 - Performance Data; Unprocessed Anechoic Frequency Response, 1 watt @ 1 metre on axis; System Frequency Response (with system controller) @ 1m on axis

10. Performance Data FREQUENCY RESPONSE (iQ 10) Unprocessed Anechoic Frequency Response, 1 watt @ 1 metre on axis FREQUENCY RESPONSE – Midrange (iQ 10) System Frequency Response (with system controller) @ 1m on axis

Page 15 - FREQUENCY RESPONSE – High Frequency (iQ 10)

FREQUENCY RESPONSE – High Frequency (iQ 10) INPUT IMPEDANCE – Midrange (iQ 10)

Page 16 - INPUT IMPEDANCE – High Frequency (iQ 10)

INPUT IMPEDANCE – High Frequency (iQ 10) FREQUENCY RESPONSE – Passive (iQ 10P) System Frequency Response @ 1m on axis (iQ 10P) 16

Page 17 - iQ 10P INPUT IMPEDANCE; data can be

iQ 10P INPUT IMPEDANCE A comprehensive range of measurements including off axis frequency response curves, octave & third octave polar diagrams (single & two cabinet arrays) and beamwidth plots as well as Ease ™ data can be downloaded from http://www.tannoy.com/ 17

Page 18 - Technical Specifications

11. Technical Specifications Frequency Response (1) +/- 3dB 180Hz – 19kHz Nominal Dispersion 60° × 40° (H × V) Maximum SPL @ 1m (2) 129dB Average (2) 135dB Peak (10ms) Driver Complement 1 x 250mm (10”) PowerDual™ Components iQ 10 – Midrange iQ 10 – High Frequency iQ 10P - System Frequency Band (3) 1...

Page 19 - Gain

19 12. System Configurations & OEM Controllers Passive or Biamp? The iQ 10 is supplied as standard for bi-amp operation, therefore there is no internal passive crossover network between the mid & hf units. The Bi-amp controller parameters below must be adhered to for optimum performance. An ...

Page 21 - DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION

21 13. iQ 10 Service Parts and Accessories Part Number Description 7900 0607 Driver Kit Type 2519 (LF) 7900 0609 Recone Kit Type 2519 (LF) 7900 0608 Driver Kit Type 0278 (HF) 7900 0610 Diaphragm Type 0278 (HF) 8001 2820 VEB – Secur ET – Eyebolts M10 8001 2850 Secur ET VPC Pole Clamp 8000 3630 TDX1 D...

Page 22 - Declaration of Conformity

15. Declaration of Conformity The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to ...