3Com FlexWATCH 3110 - Manuals

Page 2 - Network Video Server User’s Manual

Network Video Server User’s Manual Seyeon Tech Co., Ltd 2 - INTPLUS [2005] -

Page 3 - Table of Contents; Overview of FlexWATCH; What is FlexWATCH; Key Function of FlexWATCH

Network Video Server User’s Manual Seyeon Tech Co., Ltd 3 Table of Contents Overview of FlexWATCH TM Server .......................................................... 10 1 Packing List .............................................................................................. 10 2 What is FlexWAT...

Page 8 - Notice; reservation and without notification to its users.; Copyright; No part of this

Network Video Server User’s Manual Seyeon Tech Co., Ltd 8 Notice • The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Seyeon Tech assumes no liability resul...

Page 9 - Warning; install or OPERATRE FlexWATCH; server. Contact the local Dealer or Distributor.; server

Network Video Server User’s Manual Seyeon Tech Co., Ltd 9 Warning To prevent risk of electric shock, Do not remove system-case. No user serviceable parts inside. Any repair or modification for the product will be allowed to qualified service personal only . Do not expose this appliance to water or m...

Page 10 - Server; Packing List

Network Video Server User’s Manual Seyeon Tech Co., Ltd 10 Overview of FlexWATCH TM Server 1 Packing List Please check and make sure following items are included in your package without any missing items. If there are any missing items, please refer to your local distributor. A. FlexWATCH TM 3110..…...

Page 11 - Self contained stable system

Network Video Server User’s Manual Seyeon Tech Co., Ltd 11 2 What is FlexWATCH TM ? The FlexWATCH TM server is the Network Video Server, which transmits digital images captured by Analog CCD camera over the Internet. So users can view real-time live images over the Internet at anytime and anywhere u...

Page 12 - Product Specification; Others

Network Video Server User’s Manual Seyeon Tech Co., Ltd 12 2.2 Product Specification Hardware · 32bit Embedded CPU · Flash 4Mbytes /SDRAM: 32Mbytes · Hardware Motion JPEG engine · Linux version 2.4.xx operating system System Requirements · OS : Windows 95/98/2000/XP/NT/ ME, Linux, Mac, Unix, Linux O...

Page 13 - Basic Network Connection Diagram; FlexWATCH; Leased Line connection; server and view from the Internet.; Static IP address from Cable modem or xDSL line; server and view from the Internet

Network Video Server User’s Manual Seyeon Tech Co., Ltd 13 · Dynamic IP support through AOIP 2.3 Basic Network Connection Diagram FlexWATCH TM server provides flexible connectivity with any type of networks available around you such as Leased line, Cable modem, xDSL line and PSTN (POT) line. Thus, i...

Page 14 - Dynamic IP address from Cable or xDSL line

Network Video Server User’s Manual Seyeon Tech Co., Ltd 14 2.3.3 Dynamic IP address from Cable or xDSL line FlexWATCH TM server can be installed on even Dynamic IP network. But it needs to be registered in AOIP server which is an IP gateway running by Flexwatch.com or your local Distributor. For mor...

Page 15 - your local Phone line based Internet connection.; server through PSTN line; You can make a call to FlexWATCH; server from anywhere and at anytime. But if you are; Application; server can be applied.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 15 your local Phone line based Internet connection. 2.3.5 Dial-in to FlexWATCH TM server through PSTN line You can make a call to FlexWATCH TM server from anywhere and at anytime. But if you are concerned about call charge, we are recommending ...

Page 16 - Manager

Network Video Server User’s Manual Seyeon Tech Co., Ltd 16 B. ITS (Intelligent Traffic System) for real time monitoring C. IBS (Intelligent Building System) using FlexWATCH TM Manager D. Internet broadcasting E. School, Kindergarten, Nursery, Franchised Restaurant & convenient store. F. Facility...

Page 17 - Caution and observance; server. If you need to connect FlexWATCH; Hardware Description; FW-3110 Hardware Description; Front Panel View

Network Video Server User’s Manual Seyeon Tech Co., Ltd 17 3 Hardware Description • This chapter contains list of items to be prepared for the installation of FlexWATCH TM server. • Please carefully read this chapter before the installation. • Please prepare all the necessary items before start inst...

Page 18 - LAN Port for 10/100M Base T Auto sensing; Rear Panel View; refer to External device configuration menu.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 18 Menu Description A DC12V DC 12V power B LAN LAN Port for 10/100M Base T Auto sensing C COM RS-232 port for serial input device, Voice kit, PTZ. Console for Hyper Terminal must be connected to this port only. D LAN LED Blinking only when LAN ...

Page 19 - IP assignment; Key Words for Network; server over the Internet, you need

Network Video Server User’s Manual Seyeon Tech Co., Ltd 19 IP assignment 1 Key Words for Network LAN (Local Area Network) : Under the LAN network, any network device in the same LAN network can be accessed by any other network device. But LAN network can not be accessed from the Internet (WAN). Most...

Page 21 - Check Points before IP assignment; IP address; server. Please consult with your; server is to be installed in your corporate network,; server in the private IP; Static IP address enabled PC (DHCP Disabled PC); server than DHCP

Network Video Server User’s Manual Seyeon Tech Co., Ltd 21 LAN is never transmitted on the Internet. AOIP (Always On Internet Protocol) Server: AOIP™ server (Always On IP) is run by Seyeon Technology or its business partner and is a gateway for remote users to access FlexWATCH™ servers which is conn...

Page 22 - ipconfig; server, since it is the same class of your IP address and can be

Network Video Server User’s Manual Seyeon Tech Co., Ltd 22 network. \ C:\> ipconfig Windows 2000/XP IP Configuration Ethernet adapter Local area connection : Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.0.158 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Defa...

Page 23 - DHCP Enabled PC; LAN cable or Cross-Over Cable; Check out whether FlexWATCH; server can be connected through LAN cable or Cross--

Network Video Server User’s Manual Seyeon Tech Co., Ltd 23 Reply from 192.168.0.155: bytes=32 time=10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 2.1.2 DHCP Enabled P...

Page 24 - LAN Cable Environment

Network Video Server User’s Manual Seyeon Tech Co., Ltd 24 over cable. 2.2.1 LAN Cable Environment If your PC is connected to network through LAN cable, you need to connect FlexWATCH TM server to LAN port of Hub or Router. 2.2.2 Cross-over cable If LAN network is not available, you can directly conn...

Page 25 - PC Environment; Factory Default; root; root; IP Assignment; server is connected to; Through Installation Wizard Program

Network Video Server User’s Manual Seyeon Tech Co., Ltd 25 2.3 PC Environment Check out whether your PC is connected to LAN or WAN network or stand-alone. If stand alone, you need to use Cross-over cable or build up LAN environment to use LAN cable. 3 Factory Default Please refer to the following fa...

Page 26 - Description of Window; WAN PORT is only for setting up FW-5000 and

Network Video Server User’s Manual Seyeon Tech Co., Ltd 26 You can use IP Installation Wizard Program through following step. (IPInstallationWizard.exe is provide in the product CD) Preset a PC with Microsoft Windows O/S. 1) Connect FlexWATCH TM server into the network (Hub) that your PC belongs to....

Page 28 - Note; IP Assignment through Hyper Terminal mode

Network Video Server User’s Manual Seyeon Tech Co., Ltd 28 8) Click “Save IP Address” button to save IP-Address in the Flash Memory. 9) Click “Go to Home Page” button to access to FlexWATCH TM Web browser. 10) For server configuration, click “Admin” Icon and Input User ID and Password (Factory defau...

Page 29 - Serial Port Settings; Bits per Second; None

Network Video Server User’s Manual Seyeon Tech Co., Ltd 29 4) Select the connected COM port with serial cable and press OK button. 5) When ‘Port Settings’ window show up, input each values from the table below. Serial Port Settings Value Bits per Second 115200 Data bits 8 Parity None - INTPLUS [2005...

Page 30 - Stop bits; see following network setup values.; server. After this, press “y” to apply the new network configuration.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 30 Stop bits 1 Flow control None 6) After setting Hyper Terminal, press Enter key several times and then you can see messages as below. Input Login ID and Password. (Factory defaults for Admin ID and Password are root/root.) Seyeon Tech Co., Lt...

Page 31 - network configuration has successfully applied.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 31 Enter IP Address : 10.10.213.22 Enter Network Mask : 255.255.0.0 Enter Gateway : 10.10.1.1 Entered network configuation IP Address : 10.10.213.22 Network Mask : 255.255.0.0 Gateway : 10.10.1.1. Do you wish to apply your new network configura...

Page 32 - And Input ‘reboot’ command to reboot the system.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 32 Bash# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:6F:81:00:AE inet addr: 10.10.213.22 Bcast:10.10.255.255 Mask: 255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6382 errors:0 dropped:0 overruns:0 frame:0 TX packets:...

Page 33 - Live view & Camera Configuration; FW-Voyager” which provides personal Network; Operation System; Live View; ActiveX based simple view; Simple Viewer control] program

Network Video Server User’s Manual Seyeon Tech Co., Ltd 33 Live view & Camera Configuration Once IP assignment is finished, you can view live view through standard web browser such as MS Internet Explorer or Netscape Navigator. There are two different type of viewing option provided by FlexWATCH...

Page 34 - Insert the product CD in your PC; Simple Viewer control” program; Application idea; server for his own video; Java Applet based live view

Network Video Server User’s Manual Seyeon Tech Co., Ltd 34 When the Client pc is not connected to Internet, you need to manually install ActiveX components in your viewing PC. - Insert the product CD in your PC - Select “FlexWATCH TM Simple Viewer control” program - Application idea ActiveX based SD...

Page 36 - FW-Voyager based view and recording; Click “Voyager” tab in the web page of the server; Camera configuration; Camera value string configuration

Network Video Server User’s Manual Seyeon Tech Co., Ltd 36 Output control : Relay output device can be controlled through simple view page. But note that you need to get permission to control it. 2 FW-Voyager based view and recording FW-Voyager is web based DVR software for personal video recording....

Page 37 - video related value string for his own application.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 37 video related value string for his own application. Default Video Format : To manually change video format. Note that server auto sense the video format Video with UART sensor data: Serial input data can be sent along with video so that appl...

Page 38 - Image encryption; Simple set up encryption code; window

Network Video Server User’s Manual Seyeon Tech Co., Ltd 38 Thus, please contact your local vendor to get more in-depth technical info to decrypt the value string. 3.1.1 Image encryption Image encryption is security feature to prevent unwanted image hacking when anonymous user accesses the system. On...

Page 39 - Full Large

Network Video Server User’s Manual Seyeon Tech Co., Ltd 39 User defined camera name will be appeared on the camera name column of video. Up to 20 different English characters can be used. ( Notice : If you are using 2-Byte Unicode Character, number of character is limited to 10 ) Image Size : 4 diff...

Page 40 - Video Motion Detection; Setting procedure

Network Video Server User’s Manual Seyeon Tech Co., Ltd 40 displayed. Video Source: color and Gray mode option Image Quality: 5 quality levels - highest, high, normal, low, lowest ) Note Please note that if you increase image size and quality, actual JPEG file size will be increased and this may aff...

Page 41 - How to save Motion triggered image in the NVR solution

Network Video Server User’s Manual Seyeon Tech Co., Ltd 41 3.3.2 How to save Motion triggered image in the NVR solution Recording in the FW-5440/5000 Simply check “Motion Detection” option in the recording condition menu in the FW-5440 or FW-5000 when motion detection option is enabled in the FlexWA...

Page 42 - Recording in the FW-Manager

Network Video Server User’s Manual Seyeon Tech Co., Ltd 42 Recording in the FW-Manager To record motion triggered image in the FW-Manager (NDVR Software) client program, you should not use Software motion detection function in the FW-Manager. - Simply configure motion detection for the selected came...

Page 43 - System Configuration; System Information; User definable and Identifier of the system when the system is; accessed by third party program such as NDVR software.; Date & Time in the server clock

Network Video Server User’s Manual Seyeon Tech Co., Ltd 43 System Configuration System configuration is to set up basic functions which help you properly run and manage the system. It is highly recommended to set up the configuration before any other configurations. Following functions are provided ...

Page 44 - Set the correct time and click “Apply” button; Date & Time using NTP server; know any NTP timeserver available in your area.; Enable the service and select Time Zone where the FlexWATCH; server is; Type in NTP timeserver info.; Admin Password Setup; Please note followings; Admin ID(root) is not user definable and unchanging; Access Control and User registration

Network Video Server User’s Manual Seyeon Tech Co., Ltd 44 1) Go to Date & Time setup menu in the System configuration section of Admin mode 2) Set the correct time and click “Apply” button 2.2 Date & Time using NTP server If multiple servers are installed over the network and controlled by ...

Page 45 - Option to allow system access without system Login ID & PW; Full Access; Application Tips; Select [Limited Access] option in the Access Permission menu; Fill out the column provided such as User name, ID & Password

Network Video Server User’s Manual Seyeon Tech Co., Ltd 45 A. Option to allow system access without system Login ID & PW B. Channel based different user account creation C. Different control authority for Video, PTZ, Audio, and relay output device control 4.1 Full Access To allow system access b...

Page 46 - server ID which is recognized by the server. Default # is

Network Video Server User’s Manual Seyeon Tech Co., Ltd 46 Full Access : If full access is selected, any body can access the server and control the video. No Access : This is to temporally restrict camera access by specific user without delete user account to temporally block access to the camera. S...

Page 47 - Frame rate control; Set up Maximum frame rate. Following table could be an example.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 47 Thus, 4 TH camera can be Camera# 3 in this menu. 5 Frame rate control Maximum Video frame rate which sever can transmit over the IP network can be set up through Frame rate control option. Through this maximum frame rate control option, user...

Page 48 - Active Mode : FlexWATCH

Network Video Server User’s Manual Seyeon Tech Co., Ltd 48 6 Tx Module Registration(NVCP) ) Notice - If you do not connect FlexWATCH TM server to NDVR server, do not set TX module configuration - Once Tx Module configuration is done, set up RX module configuration in the NDVR server as well Video pr...

Page 49 - Type in NVCP Password in the NVCP Password configuration filed.; server. Once NVCP Password

Network Video Server User’s Manual Seyeon Tech Co., Ltd 49 1) Click TX Module registration menu in the System configuration mode of Admin window. 2) Type in NVCP Password in the NVCP Password configuration filed. ) Notice NVCP Password is security feature which authenticate server access by RX modul...

Page 50 - Once Active mode is selected, type in IP address of NDVR server.; server is programmed to communication with NDVR server; WAN Network(Global Static) Passive mode

Network Video Server User’s Manual Seyeon Tech Co., Ltd 50 5) Once Active mode is selected, type in IP address of NDVR server. ) Note NVCP port should be open to communicate with NDVR Server, when the FlexWATCH TM server is programmed to communication with NDVR server Following is recommended settin...

Page 51 - Network Configuration; Network configuration; Static IP; How to access the server under DHCP environment

Network Video Server User’s Manual Seyeon Tech Co., Ltd 51 Network Configuration Network configuration mode provides interface for the server to be connected to broadband network or PSTN line. In addition to basic network, application port such as HTTP, NVCP, Voice port configuration and IP filterin...

Page 52 - IP notification by E-mail service; when the server is set up DHCP Client.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 52 Once DHCP is enabled, there is not other setting to be changed in the network works configuration except DNS info, if required. 2.1.1.1 IP notification by E-mail service You can receive IP address of the server through e-mail from the server...

Page 53 - Server access through AOIP server; PPPoE Configuration

Network Video Server User’s Manual Seyeon Tech Co., Ltd 53 configuration in Advanced Service 2.1.1.1 Server access through AOIP server Once Server is registered in the AOIP server and DHCP is enabled, you can access the server through AOIP server. IP address of server can be found from AOIP server a...

Page 54 - Network port configuration; HTTP port configuration; Tx port is a TCP port number through which FlexWATCH; server can communicate with; server transmits data through; VDCP Port configuration

Network Video Server User’s Manual Seyeon Tech Co., Ltd 54 Once PPPoE is enabled, LAN network setting will be disabled. 3 Network port configuration HTTP port, NVCP and VDCP ports are application port through which video and audio data can be transmitted over the TCP/IP network. 3.1 HTTP port config...

Page 55 - WAN Configuration and Application; External Modem connection; Connect your MODEM and AUX Port at FlexWATCH; Select ‘Modem’ at AUX mode and click ‘Apply’ button.; System reboot will be recommended, then click ‘Reboot’ button.; Application with Dial-in

Network Video Server User’s Manual Seyeon Tech Co., Ltd 55 Note that when Voice Kit is connected to Internet, respective UDP port of the router must be opened. 4 WAN Configuration and Application Server is designed to make a call to ISP or can receive a call from outside so that server can establish...

Page 56 - Pre/post alarm image sending through e-mail; Dial Out configuration; Dial-up through Standard modem; Select “PPP client” option and fill out the option field.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 56 Server can establish the Internet connection through PSTN line and send FTP or e-mail when the alarm condition is triggered by any event. Following can be done through Dial-out function • Pre/post alarm image sending through e-mail • Pre/pos...

Page 57 - server act as client and call out to ISP.\; server acts as a Server and receives a call from remote; server is designed to flexibly work; Dial-Out through Media specific device

Network Video Server User’s Manual Seyeon Tech Co., Ltd 57 PPP Client : This means that FlexWATCH TM server act as client and call out to ISP.\ PPP Server : This means that FlexWATCH TM server acts as a Server and receives a call from remote user. Tel#, User ID and User password : ISP phone number a...

Page 58 - Dial-in Configuration; Check Authenticate more as none.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 58 modem, GSM or GPRS Modem or any type of wireless modem. This mode is not for general users. Thus, if you need to connect special modem device, please contact your vendor or manufacturer for more information, [email protected] 4.4 Dial-in C...

Page 59 - connection only. So when you connect the FlexWATCH; Service Path

Network Video Server User’s Manual Seyeon Tech Co., Ltd 59 of the FlexWATCH TM server. Local IP address and Remote IP address is virtual IP address which is used at the time of Modem connection only Local IP address : System default IP address (192.168.2.1) resides in the FlexWATCH TM server for mod...

Page 60 - AOIP Setup; How to use AOIP service

Network Video Server User’s Manual Seyeon Tech Co., Ltd 60 LAN : This is default path the send any data to outside. Modem : when PSTN or other medium than LAN is used to send data to outside. This service port must be checked when any data is to be sent through PSTN or other medium than LAN which is...

Page 61 - AOIP configuration; Check the “Enable” option to use AOIP function; is

Network Video Server User’s Manual Seyeon Tech Co., Ltd 61 - Once things are set up, you can login to AOIP server and connect your FlexWATCH™ server. ) Note AOIP is proprietary data service run by FlexWATCH™ or its business partners around the world. Thus, depending on the country AOIP service can r...

Page 62 - Network Status

Network Video Server User’s Manual Seyeon Tech Co., Ltd 62 NVCP-Tx Port should be enabled only when video is transmitter to NDVR server such as FW-5440 and FW-5000, or Video proxy server supplied by FlexWATCH TM server. If not, do not enable this option. 7 Network Status You can see all the network ...

Page 63 - External Device connection & configuration; Serial Ports Configuration Guide; server as

Network Video Server User’s Manual Seyeon Tech Co., Ltd 63 External Device connection & configuration External device such as Serial input device, Serial output (UART) device, PTZ (pan/Tilt/Zoom) device, Audio kit and Alarm input and output device can be connected to the system and controlled ov...

Page 64 - Ports Connection for using two different devices.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 64 Available Devices COM AUX Console (Hyper Terminal) O X Modem X O PTZ O O Voice O O Serial Input O O Serial Output O O None O O 1.1.2 Ports Connection for using two different devices. AUX and COM part is provided for RS-232 and RS-485 or RS-4...

Page 65 - Interface combination

Network Video Server User’s Manual Seyeon Tech Co., Ltd 65 his needs. But same type of port for RS-232, RS-485 or RS-422 can not simultaneously be used. For example, if COM part of RS-232 is used by Hyper Terminal Connection, COM part of RS-485 can not be operative. In this case, AUX part of RS-485/...

Page 66 - Installation & Configuration of External Device; Console(Hyper Terminal cable connection); Console has to be connected to COM Port with RS-232 Serial cable.; Connect COM1 or COM 2 Port at your PC and COM Port at FlexWATCH; server with

Network Video Server User’s Manual Seyeon Tech Co., Ltd 66 RS-232 + RS-485 AUX(RS232) and COM(RS485) or COM(RS232) and AUX(RS485) RS-232 + RS-422 AUX(RS232) and COM(RS422) or COM(RS232) and AUX(RS422) ) You cannot make use of AUX (RS232) port and AUX (RS485, 422) part at the same time. Also it is no...

Page 67 - Serial Input device

Network Video Server User’s Manual Seyeon Tech Co., Ltd 67 3) Select ‘Console’ at COM mode, and Click ‘Apply’ button 4) System reboot will be recommended, then click ‘Reboot’ button. 2.2 Serial Input device Serial input device such as Car Speed sensor, BOG sensor, POS (Point of sales), ATM device wh...

Page 68 - Serial output device; Serial Output Configuration; Select ‘Serial Output’ at COM or AUX mode, and Click ‘Apply’ button.; Click “Serial Output Mode”, then following window will show up.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 68 only. This function is not for general use. Thus, if you need more close information about this, please contact your local distributor or manufacturer for further information, [email protected] . 2.3 Serial output device The system support...

Page 69 - UART(Universal Asynchronous Receiver Transmitter) device

Network Video Server User’s Manual Seyeon Tech Co., Ltd 69 G. After setting up the parameters in the each filed, click ‘Apply’ button. Note that if you are using X10 device protocol, you do not need to set up parameters, but simple select X10 “Enable” option. 2.3.2 X 10 device & Z256 X10 and Z25...

Page 70 - By-pass command string from third party; PTZ device connection and configuration; PTZ connection

Network Video Server User’s Manual Seyeon Tech Co., Ltd 70 A. By-pass command string from third party This is to send command string from third party application program to the target device connected to the server. More about this function can be supplied by HTTP CGI API guide. B. Control panel ins...

Page 71 - Select ‘PTZ’ at COM or AUX mode, and click ‘Apply’ button.; Supported PTZ List by FlexWATCH

Network Video Server User’s Manual Seyeon Tech Co., Ltd 71 2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration. 3) Select ‘PTZ’ at COM or AUX mode, and click ‘Apply’ button. 4) System reboot will be recommended, then click ‘Reboot’ button. 5) After rebooting, Go to ...

Page 73 - Preset function was field Tested; Voice Kit Connection and configuration; server and you can enjoy not only live

Network Video Server User’s Manual Seyeon Tech Co., Ltd 73 RNK RNK-DOME 485 O O DAIWA DMP-23-H1 485 O O O LILIN PIH-717 485 O PHILIPS Auto Dome 485 O FINE system CRR-1600I 232 O O O Samsung Techwin SRX-100B 485 O O O NOTE : Symbol Reference * : Preset function was program only . ** : Preset function...

Page 74 - Application Idea; server behind

Network Video Server User’s Manual Seyeon Tech Co., Ltd 74 5) System reboot will be recommended, then click ‘Reboot’ button. 6) After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports Configuration 7) Click “Voice Mode”, then following window will show up UDP Port : Voi...

Page 75 - Alarm input device connection; Opto-coupled Sensor input Diagram; Alarm Output(Relay output) device connection

Network Video Server User’s Manual Seyeon Tech Co., Ltd 75 8) Click “Save” button to save your configuration. 3 Alarm input device connection FlexWATCH TM server has Alarm Sensor interface so that it can send alarm notification by activating e-mail or FTP function or activate alarm output device suc...

Page 76 - Alarm output device connection; Relay Output Circuit Diagram; Manual control of Alarm output device; Alarm output device through web browser; Go to simple viewer web page; Click “Output control” button in the web page

Network Video Server User’s Manual Seyeon Tech Co., Ltd 76 light. Manual or automatic control of alarm output device is supported by the server so that relay output device such as siren, light or any output device can remotely be controlled through standard web browser or third party application pro...

Page 77 - device; Alarm output device through Admin Page; Run Admin configuration panel; Automatic Control of Alarm Output device

Network Video Server User’s Manual Seyeon Tech Co., Ltd 77 3) Check the output port number and click apply button to activate the alarm output device 4.2.2 Alarm output device through Admin Page Alarm output device can manually be controlled through Admin page of the system. This option is recommend...

Page 78 - Click None buffering service menu and select “Alarm output” menu.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 78 combination is provided so as to set up powerful and various working condition for each alarm output device. 1) Go to Advance service option in the Service configuration mode in the Admin window. 2) Click None buffering service menu and sele...

Page 79 - Advanced Service configuration; Buffering Service; Steps to use Buffering service

Network Video Server User’s Manual Seyeon Tech Co., Ltd 79 Advanced Service configuration Advanced service configuration is intended to provide more sophisticated functions which are required by sophisticated users. Thus, if you are not familiar with or not good at advanced features, we recommend yo...

Page 80 - System and Pre Alarm Buffer memory; System Memory allocation

Network Video Server User’s Manual Seyeon Tech Co., Ltd 80 & ftp and Alarm buffering service B. Pre alarm buffer size : Once memory allocation is done, assign Pre alarm buffer size (Pre alarm image buffer pool) to be used for e-mail, FTP and Alarm buffering services. Any pre alarm buffer for res...

Page 81 - Pre alarm buffer size

Network Video Server User’s Manual Seyeon Tech Co., Ltd 81 pre alarm buffer size for respective camera can be done within this assigned memory. Note that Pre Alarm buffer for even Alarm buffering service can be done within this memory size. Thus, you need to be careful to assign memory for this serv...

Page 82 - Go to Advance service mode in the Service configuration section; Go to “Buffering service” mode; Set up pre-alarm Buffer size and delay time.; Buffer calculator; Total buffer size; Total Pre-alarm buffer size

Network Video Server User’s Manual Seyeon Tech Co., Ltd 82 maximum number of pre alarm for e-mail, ftp or Alarm buffering service (Pre alarm only) can be done with this buffer size, if there is enough memory space for respective services. Note that there must be enough memory space left for e-mail, ...

Page 83 - Alarm buffering service size; Total number of Pre Alarm+ Post Alarm for FTP per channel < 256 frame.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 83 Alarm buffering service size (60%) • Total Buffer size is variable depending on the memory used by the system - Total number of Pre Alarm+ Post Alarm for FTP per channel < 256 frame. - Total number of Pre + Post alarm for e-mail per chann...

Page 84 - Go to Buffering service mode; Click “Buffer Calculator” button to run the calculator; Service Condition

Network Video Server User’s Manual Seyeon Tech Co., Ltd 84 2) Go to Buffering service mode 3) Click “Buffer Calculator” button to run the calculator 4) Pre configure pre/post alarm buffer for each service. This previous window can be open till you manually disclose the Window. Thus, you can refer to...

Page 85 - Condition Setup

Network Video Server User’s Manual Seyeon Tech Co., Ltd 85 2.1 Condition Setup This is to define basic condition to activate any option selected. Select right condition from the option provided. Always : To active any selected option regardless condition. If you select this condition Schedule and Ev...

Page 86 - setup window become inactive; Schedule and Event :; Criteria Setup; Schedule

Network Video Server User’s Manual Seyeon Tech Co., Ltd 86 setup window become inactive Event Only : To activate any selected option by Event only. Sensor status change is recognized as Event. Schedule and Event : To active any selected action when Event is triggered for the specified time period on...

Page 87 - Please check out sensor type connected to FlexWATCH

Network Video Server User’s Manual Seyeon Tech Co., Ltd 87 Event number can be mapped as a Sensor port and camera number. DI Open State : This means that sensor is triggered and become open status from Normal close status. Select this when you use NC(Normal Close) type sensor. DI Close State : This ...

Page 88 - e-mail configuration; e-mail function configuration

Network Video Server User’s Manual Seyeon Tech Co., Ltd 88 3 e-mail configuration Schedule, event or schedule and event driven e-mail sending is supported by the server so that when there is any pre-configured event is happened, e-mail notice will be sent to any e-mail account. 3.1 e-mail function c...

Page 90 - e-Mail condition set up; FTP Configuration; Directory option

Network Video Server User’s Manual Seyeon Tech Co., Ltd 90 with Pre alarm buffer size. Note that the sum of pre and post alarm can not exceed 10 frames. Value Format : Value strings can be sent together with e-mails. Please click “ ” mark in the admin page to get more information. 3.2 e-Mail conditi...

Page 91 - Directory option for Buffered FTP; server has two different level of directory and file name; Base Directory Name :

Network Video Server User’s Manual Seyeon Tech Co., Ltd 91 slightly different. 4.1.1 Directory option for Buffered FTP Buffered FTP means that only pre/post alarm buffered image will be sent to FTP server when the ftp is triggered by the event. FTP function of FlexWATCH TM server has two different l...

Page 92 - Directory option for Periodic FTP (Duration Service)

Network Video Server User’s Manual Seyeon Tech Co., Ltd 92 User defined prefix of file name of each image. File name of FTP images will automatically be concatenated after prefix( Base File name ). Directory name : Multiple directories can be created in the Base directory so that ftp image can be st...

Page 93 - FTP service configuration; Buffered FTP service

Network Video Server User’s Manual Seyeon Tech Co., Ltd 93 limit number of image to be stored and refreshed. If you set it as 8, 8images will be stored in the FTP directory and FIFO(first come, first out) based image will be saved in the FTP server. Overwrite: This is to refresh old image with new i...

Page 94 - Periodic FTP service; Buffering Service option

Network Video Server User’s Manual Seyeon Tech Co., Ltd 94 1) Go to Advance Service menu in the service configuration mode and select Buffering Service option 2) Set up Pre alarm buffering configuration for FTP service 3) Set up FTP directory and file name option 4) Select the camera and set up FTP ...

Page 95 - Go to ‘Advanced Services’ menu.; Alarm Buffering Service; Alarm Buffering Service Configuration; memory assignment for Alarm Buffer service.; Select “Alarm Buffer Service” from the listed option

Network Video Server User’s Manual Seyeon Tech Co., Ltd 95 4) Go to ‘Advanced Services’ menu. - Click ‘Apply’ button to apply the new service configuration as above. - Close the window of ‘Admin menu’. When ‘Save configuration’ window pop-up, click ‘Save Configuration’. Application idea If server is...

Page 96 - Enable the Alarm buffering service.; Select the camera and assign Pre/post alarm image frames.; Playback of Pre/post alarm Image

Network Video Server User’s Manual Seyeon Tech Co., Ltd 96 4) Enable the Alarm buffering service. 5) Select the camera and assign Pre/post alarm image frames. 6) Click “Save” button to memorize your new setting in the system. 7) Click the Condition menu and set up alarm buffering service condition. ...

Page 97 - Click “Clear Buffer” to delete all archived images; Sensor Notification service

Network Video Server User’s Manual Seyeon Tech Co., Ltd 97 Preview Single Images: This is to view image one by one. Preview Multi images: You can view panoramic images of all the saved images at a glance. 2) Click Preview Single Imager or Preview Multi images option to playback. 3) Click “Clear Buff...

Page 98 - Select sensor input number

Network Video Server User’s Manual Seyeon Tech Co., Ltd 98 program through CGI Patch. This option is to invoke third party application program upon receipt of sensor information from FlexWATCH TM server. 1) Go to Advance service configuration of Service configuration mode 2) Click None buffering ser...

Page 99 - Utilities; Save Configuration

Network Video Server User’s Manual Seyeon Tech Co., Ltd 99 Utilities Utilities is to manage and control system properly. Save Configuration, Flash Update, System Reboot and system upgrade options are provided. 1 Save Configuration This is to save all new configuration and settings in the system memo...

Page 100 - System Update; Description of files system

Network Video Server User’s Manual Seyeon Tech Co., Ltd 100 logics for system configuration, since executing this option Except Network configuration will lose all of your setting. 4 System Update System update can remotely be done through web page of the system or ftp option with telnet and Hyper T...

Page 102 - Update Procedure; Go to Utilities column and select “System update” option

Network Video Server User’s Manual Seyeon Tech Co., Ltd 102 PTZ Device Driver : PTZ Device Driver is already built-in the system. But if there is a new PTZ Device driver supported by the system, it can separately uploaded into the system without other software change. Sensor Device Driver : Serial i...

Page 103 - Once update is successfully done following result will come up.

Network Video Server User’s Manual Seyeon Tech Co., Ltd 103 4) Once update is successfully done following result will come up. 5) If you want to update RAM Disk, System and web page, please click “Next” button follow the web guide to update more files. 6) If all of file update is finished “System Re...

Page 105 - Warranty

Network Video Server User’s Manual Seyeon Tech Co., Ltd 105 Warranty Product Network Video Server Model FlexWATCH TM 3440 S/N Seyeon Tech Ltd. Warranty 1 year Limited A/S +82-2-3017-0866 www.flexwatch.com Seyeon Tech Co., Ltd. TEL : +82-2-3017-0855 FAX : +82-2-3017-0843 http://www.seyeon.co.kr http:...