3Com 6200 - Manuals

3COM Security Switch 6200 Hardware and Software Users Guide 1-1 Introduction The Security Switch 6200 is a high performance, turnkey security services switch that integrates best-in-class firewall, virtual private networks, intrusion detection, and content security engines. The system offers high po...

1-2 3COM Security Switch 6200 Hardware and Software Users Guide Introduction • One serial console port. • Two redundant, hot-swappable power supplies. • Five expansion slots for optional VPN or other security acceleration cards. Chassis The chassis is front rack mountable, in a standard 19 inch rack...

3COM Security Switch 6200 Hardware and Software Users Guide 1-3 Introduction Management Options The system provides two system management options: • First time startup interview • Configuration Tool First Time Startup Interview The system uses a built in, easy to configure, interview tool (cos_inter...

3COM Security Switch 6200 Hardware and Software Users Guide 2-1 Installation This chapter describes the system installation, covering the following topics: • Pre-installation considerations • Chassis installation • Interface connections Before You Start ! WARNING: To ensure power connectivity, if yo...

2-2 3COM Security Switch 6200 Hardware and Software Users Guide Installation Site Requirements The system installation site should meet the following requirements: Shipment Check Using the packing slip as a reference, inspect package contents for missing or damaged items. If parts are missing or dam...

3COM Security Switch 6200 Hardware and Software Users Guide 2-3 Installation Figure 2-1 3COM Security Switch 6200 Shipping Contents NOTE: 3COM recommends that you save the shipping containers in the event you need to send back one or more components. FIBER 10/100/1000 10/100 CONSOLE (max) 9800,8,N,1...

2-4 3COM Security Switch 6200 Hardware and Software Users Guide Installation Additional Equipment • PC running RedHat Linux 6.2 or greater software. This software is used to support the Security Switch 6200 Graphical User Interface (GUI) and for hosting the Check Point™ FireWall-1 ® Management Serve...

3COM Security Switch 6200 Hardware and Software Users Guide 2-5 Installation Terminal or PC A VT-100 terminal or a Personal Computer (PC) is required during installation. The terminal or PC is connected to the chassis’s craft port, allowing you to monitor start-up diagnostics and to configure the un...

3COM Security Switch 6200 Hardware and Software Users Guide 3-1 Interface Connections and First Time Start-Up This chapter describes the procedure for powering up the system for the first time. Specifically covered are the following: • Connecting to the Management Console • Powering Up the System • ...

3-2 3COM Security Switch 6200 Hardware and Software Users Guide Interface Connections and First Time Start-Up To connect to the serial connector use the DB9 serial connector located on the front panel of the system. NOTE: If you are connecting to the system Management Console using a terminal or PC,...

3COM Security Switch 6200 Hardware and Software Users Guide 3-3 Interface Connections and First Time Start-Up Connecting Remotely To access the system remotely: 1. Connect one end of an RJ45-to-RJ45 cable into a remote access device. 2. Connect the other end into the Management port. Figure 3-2 show...

3-4 3COM Security Switch 6200 Hardware and Software Users Guide Interface Connections and First Time Start-Up 2. Attach the male end of the power cable into an AC power source. The system is powered up when power is applied to the power supplies. NOTE: If the system is powered up with one power supp...

3COM Security Switch 6200 Hardware and Software Users Guide 3-5 Interface Connections and First Time Start-Up POST Error Beep Codes The following tables list POST error beep codes. Before system video initialization, the BIOS and BMC use these beep codes to inform users on error conditions. BMC Gene...

3COM Security Switch 6200 Hardware and Software Users Guide 3-7 Interface Connections and First Time Start-Up POST Memory Error 3-Beep Codes Beep Code Debug port 80h error Codes Daignostic LED Decoder Meanings G=Green, R=Red, A=Amber Hi Low 3 00h Off Off Off Off No memory was found in the system 3 0...

3COM Security Switch 6200 Hardware and Software Users Guide 4-1 Configuring the Security Switch 6200 System The system uses a menu driven configuration interface (cos_config) for configuration purposes. This tool supports adding, modifying, or deleting any of the system configuration parameters. Thi...

3COM Security Switch 6200 Hardware and Software Users Guide 5-1 Upgrading the System Software This chapter describes how to update your 3COM Security Switch 6200 system software. Upgrading the System Software If you are upgrading your system from a previously configured release, you do not need to u...

3COM Security Switch 6200 Hardware and Software Users Guide 7-1 Technical Support 3Com provides easy access to technical support information through a variety of services. This chapter describes these services. Information contained in this chapter is correct at time of publication. For the most rec...

7-2 3COM Security Switch 6200 Hardware and Software Users Guide Technical Support 3Com Knowledgebase Web Services The 3Com Knowledgebase is a database of technical information to help you install, upgrade, configure, or support 3Com products. The Knowledgebase is updated daily with technical informa...

3COM Security Switch 6200 Hardware and Software Users Guide 7-3 Technical Support Support from 3Com If you are unable to obtain assistance from the 3Com online technical resources or from your network supplier, 3Com offers email and telephone technical support services. To find out more about your s...

7-4 3COM Security Switch 6200 Hardware and Software Users Guide Technical Support Telephone Support Numbers Country Telephone Number Country Telephone Number Asia, Pacific Rim Australia India Indonesia Malaysia New Zealand Pakistan Philippines Singapore S. Korea Taiwan Thailand 1 800 678 515 +61 2 9...

7-6 3COM Security Switch 6200 Hardware and Software Users Guide Technical Support Returning Products for Repair Before you send a product directly to 3Com for repair, you must first obtain an authorization number. Products sent to 3Com without authorization numbers will be returned to the sender uno...

3COM Security Switch 6200 Hardware and Software Users Guide A-1 A Technical Specifications This appendix lists the physical, environmental, and power characteristics of the 3COM Security Switch 6200. Physical Characteristics Size (Inches): 3.5 H x 17.5 W x 25.5 DWeight: approximately 32 lbs Environm...

3COM Security Switch 6200 Hardware and Software Users Guide B-1 B Connector Pin Assignments This appendix describes the craft port pin assignments: The Craft port, located on the front of the system, uses a DB- 9 connector with the following pin identifications and associated signals. DB-9 Connector...

3COM Security Switch 6200 Hardware and Software Users Guide C-1 C Regulatory Information This appendix provides the following compliance statements: • Regulatory Standards Compliance • Radio Frequency Interference • VCCI Statement Regulatory Standards Compliance The following regulatory agencies hav...

C-2 3COM Security Switch 6200 Hardware and Software Users Guide Regulatory Information EMI Compliance Radio Frequency Interference NOTE In accordance with FCC Part 15 Subpart B requirements, changes or modifications made to this equipment not expressly approved by 3COM Corporation could void the use...