3Com 3C16592B, 3C16593B - Manuals

Numbered elements in this diagram refer to numbered sections in thetext. These numbers, in bold, are used as references. Front Panel 1 12 or 24 RJ-45 10/100 Ports You can use these ports to connect 10BASE-T or 100BASE-TX devices(workstations and other equipment) to the Baseline Dual Speed Hub. Asthe...

To connect the hub to a 10 Mbps or 100 Mbps unit, connect an MDIXport on the unit to port 12 or 24 on the Hub, as shown above. Ensurethat the MDI switch on the Hub is in (MDI). If an MDI/MDIX port is usedon the other unit, ensure that the MDI switch for that port is out (MDIX).Alternatively, you can...

The Baseline Dual Speed Hub is supplied with two mounting brackets andfour screws. These are used for rack mounting the unit. When mountingthe unit, you should take note of the guidelines given in “Positioning theBaseline Dual Speed Hub”on page 3. The Baseline Dual Speed Hub is 1U high and will fit ...