Boss Audio Systems OC-20G - Manual
Boss Audio Systems OC-20G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing Batteries
- Page 3 – Making the Connections; Selection Switch; SYNTH VOL Knob; Connecting
- Page 4 – Turning On the Power
- Page 5 – Operating Instructions; Using the Pedals
- Page 6 – Panel Operations
- Page 7 – Part Names and Functions; Front Panel; OCTAVE
- Page 8 – DISTORTION
- Page 10 – Rear Panel
- Page 11 – Application Examples; Using in Combination with Other Effect Devices
- Page 13 – Using in Combination with the GR-33
- Page 14 – Troubleshooting; The power doesn’t come on.
- Page 15 – No effects are being applied.
- Page 16 – Sample Settings; Warm Octave Sound
- Page 17 – Specifications
- Page 19 – Read this information ”USING THE UNIT SAFELY“
- Page 21 – Read this information “IMPORTANT NOTES”; IMPORTANT NOTES; Power Supply: Use of Batteries; Placement
- Page 22 – Maintenance
- Page 23 – FEDERAL COMMUNICATIONS COMMISSION
Thank you, and congratulations on your choice of BOSS OC-20G GK Effect.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY”
and “IMPORTANT NOTES” (p. 18; p. 21).
These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature
provided by your new unit, Owner’s manual should be read in its entirety. The manual should
be saved and kept on hand as a convenient reference.
Copyright © 2001 BOSS CORPORATION
All rights reserved. No part of this publication may
be reproduced in any form without the written
permission of BOSS CORPORATION.
Main Features
●
New kind of effect for use with GK pickups and GK-Ready guitars.
●
Six independent selectable octave processors: on for each string.
●
Built-in distortion for ultra-heavy sound.
●
Send and return for direct guitar signal.
●
The controls and pedals provide simple and intuitive operation.
●
Can run on battery power (six AA type).
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installing Batteries Insert the included batteries as shown in figure, being careful to orient the batteries correctly. fig.02 • When turning the unit upside-down, get a bunch of newspapers or magazines, and place them under the four corners or at both ends to prevent damage tocontrols. Also, you ...
3 Making the Connections About the GK-2A To use the OC-20G with a guitar equipped with the GK-2A (or other GK-compatible guitar), you will need an optional GK cable.Refer to the GK-2A Owner’s Manual for instructions on installing the GK-2A. S1/S2 Switch The GK-2A’s S1/S2 switches correspond to this ...
4 Making the Connections • To get the best performance from the instrument, set your amp to “Clean” (no distortion). • When connecting the instrument to a guitar amp, make the necessary adjustments to get the most suitable tone. When recording direct, use this with a COSM amp(GT-3, GP-20 etc.). • Wh...
