Bose FreeSpace 360P- User Manual
Bose FreeSpace 360P– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1. Full bandwidth pink noise is amplifi ed to a level at the loudspeaker terminals corresponding to 1 watt as referenced to the nominal impedance. The average sound pressure level (dB-
SPL) is measured at 1 meter, 30° above the ground plane.
2. Full bandwidth pink noise is amplifi ed to a level at the loudspeaker terminals corresponding to the long-term rated power handling of the speaker. The average sound pressure level
(dB-SPL) is measured at 1 meter, 30° above the ground plane.
3. Full bandwidth noise, meeting the International Electrotechnical Commission Standard #268-5 is amplifi ed to a level at the loudspeaker terminals corresponding to the power
handling of the loudspeaker. The loudspeaker must show no visible damage or measurable loss of performance after 100 hours of continuous testing.
BOSE
®
FreeSpace
®
360P-II
loudspeaker
Technical information
Frequency range
70Hz to15kHz (±3dB)
FreeSpace
®
360P-II versions
70V/100V (10W, 20W, 40W, 80W taps)
Sensitivity
1
87dB-SPL @ 1W, 1m (pink noise)
Maximum Acoustic Output
2
100dB-SPL @ 1m (pink noise)
Dispersion
(– 6dB point, average, 1-4kHz)
360° horizontal; 50° vertical (see pattern, below)
Long-Term Power Handling
3
40W continuous, 80W peak
Mechanical Specifi cations
Dimensions:
37 cm diameter; 38 cm high
Weight:
6.5 kg
Input Connections:
External multi-wire cable with wire nuts included
Enclosure Construction:
Glass-reinforced polypropylene
Mounting Points:
Three (3) #10 (M4) holes in base
General description
The BOSE
®
FreeSpace
®
360P-II loudspeaker is an 80-watt, full-range
environmental loudspeaker with a 360° horizontal dispersion. It is
designed for use with standard amplifi ers in a variety of applications,
such as shopping malls, outdoor restaurants, resorts and theme parks.
It offers the following features:
>
An environmental 11.4 cm Bose driver with passive equalization,
providing high reliability and high quality sound for outdoor
applications
>
A multi-tap line transformer that permits selection of tap settings of
10W, 20W, 40W, or 80W at the 70V or 100V inputs
>
Freestanding design that blends with the landscaping and permits
installation either in ground or attached to a horizontal concrete or
wood surface
>
Tamper-resistant design
Installation
The FreeSpace 360P-II loudspeakers are complete and ready for
in-ground installation. Mounting each loudspeaker securely on a
horizontal surface requires three #10 (M4) screws, which the installer
must provide. Installation options include in-ground (with up to 40%
of the enclosure buried in earth), or attached to a horizontal surface (a
wooden deck or concrete patio, for example). Product color is green and
blends with most surroundings. Painting is not recommended.
BOSE
®
Professional Systems Division
TECHNICAL DATA SHEET
1
of 2
Note:
The FreeSpace
®
360P-II loudspeaker is equipped
with a protection circuit that reduces the low-frequency
output overpowered. In the event that the protection
circuit is activated, turn off the signal source for 30
seconds for full recovery
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
