Bose ControlSpace AMS-8- User Manual

Page 4 - PC requirements; Minimum requirements to install ControlSpaceTM AMS-8 Software:; - Com Port requirements; Com Port 1 to 4 only; BOSE; Both the ControlSpace

4 En gl is h PC requirements Minimum requirements to install ControlSpace™ AMS-8 Software: - Hardware: Minimum 1 GHz Pentium based PC 256MB free RAM CD ROM player 50MB free internal Hard disk space - operating system(s) Windows 2000, Windows XP, and higher - Display Minimum resolution: 1024x768, 16 ...

Page 5 - In the offline mode the following window will appear:; AMS-8 Live Installer Software

En gli sh 5 starting up: Once the Live Installer Software started, the following window will be displayed: Click on the ‘Yes‘ button to make an online connection with the ControlSpace AMS-8 system. Click on the ‘No’ button to use the Live Installer Software in offline mode. online mode: In the onlin...

Page 6 - Press the following buttons to:; scroll up through the different menu items; AMS-8 LIvE Installer Software

6 En gl is h Press the following buttons to: scroll up through the different menu items scroll down through the different menu items Up/Down arrows: to scroll through the different menu items OK button: to open a selected menu item Left/Right arrow: to activate/deactivate a selected module lock or u...

Page 8 - Press the

8 En gl is h Press the ❑ button to change the name of the connected source. The following window will appear: Enter a (new) source name and press the OK button to store the name. Up to 12 characters can be used to display the source name on the LCD-display of the Wall Controller. When the ❑ button i...

Page 9 - Info Field; gli; Press or use the following buttons or faders to:

Info Field En gli sh 9 Press or use the following buttons or faders to: change or enter the name of the selected output/room switch from a mono to a stereo output switch from a stereo to a mono output to turn the Dynamic EQ on or off (default setting is ON)** set the Output level of the selected out...

Page 10 - gl; When the lower

Maximum Operation Minimum Operation Dynamic EQ -60dB 0dB Output Level 10 En gl is h change the Maximum volume level (between -82dB & +18dB) of the selected output/room change the Paging level (between -82dB & +18dB) of the selected output/room. The paging level can exceed the maximum volume ...

Page 12 - move a selected room from ‘available outputs’ to ‘selected outputs’

12 En gl is h (upper) to select a 1 of the 40 Presets or 1 of the 80 Paging Buttons/Zones or 1 of the 40 GPIO Contacts, shown in the info field. The function of this button depends on the selected function of this software module (see above buttons) (lower) in Room Combining mode: select a ‘master’ ...

Page 16 - A Message event (only in combination with the ControlSpace

16 En gl is h 1.6.3 Message event A Message event (only in combination with the ControlSpace ™ AMS-8 Message Card) can be used to route a digital message to a single or group of rooms at a certain time and day. In below modules one can change the Start and End time (only if Repeat setting is not ‘on...

Page 21 - . NAvIGATION BUTTONS; AMS-8 System rack control

1 2 En gli sh 21 2. ControlSpace ™ AMS-8 System rack control 1. LCD SCREEN The LCD screen shows the menu items with the settings per menu item. The language of all displayed items can be changed between English, Dutch, Danish, Swedish, Polish, Italian, Spanish, German and French. Language selection ...

Page 22 - For the rest of this menu, see the user guide

22 En gl is h 2. ControlSpace ™ AMS-8 System rack control 2.1.2 Event scheduler menu In the event scheduler menu a pre-configured event can be selected. The settings of the first 10 (of 40) (pre-configured) events can also be changed in this part of the menu. Examples of events are: Turn the system ...

Page 24 - Select the item one would like to configure..

24 En gl is h 2. ControlSpace ™ AMS-8 System rack control 2.2.1 Source installation 2.2 Installation menu Select the item one would like to configure.. Select the source one would like to configure. Configure the audio settings for the selected source. Set the gain for the selected source. Make sure...

Page 25 - Select the room one would like to configure.

En gli sh 25 2. ControlSpace ™ AMS-8 System rack control 2.2.2 Room installation Select the room one would like to configure. Change the audio settings for the selected room. In this menu one can select another Tuner preset (only if Tuner Card is installed) Select Yes to proceed, to configure or sel...

Page 26 - Use this menu to configure an event to schedule a System Standby

26 En gl is h 2. ControlSpace ™ AMS-8 System rack control 2.2.4 Room combining In the ROOM COMBINING menu one can configure up to 40 Room Combining presets. If a preset is configured one can turn a preset On or Off, so a preset will be (de-)active after the system turned on. See below submenu to con...

Page 28 - Select the required days for the event.

28 En gl is h 2. ControlSpace ™ AMS-8 System rack control For those event types wherein one can select a room or a day, the following sub menus are shown: Select the required days for the event. Select the required rooms for the event. Select contact 1..40 (nr. depends on the total nr. of linked sys...

Page 29 - Select a Paging Panel button one would like to configure.

En gli sh 29 2. ControlSpace ™ AMS-8 System rack control 2.2.7 Paging panel Select a Paging Panel button one would like to configure. Add rooms to the selected button. Use this menu to configure the rack installation (master/slave configuration when 2 or more system racks are used). Turn the power s...

Page 31 - AMS-8 PC Kit should normally be used to connect the AMS-8 system to an

En gli sh 31 3. ControlSpace ™ AMS-8 Privileged User Software 3. ControlSpace ™ AMS-8 Privileged User Software Refer to the user manual (included on the User CD rom in the carton of the AMS-8 system) for user operating instructions. The optional ControlSpace ™ AMS-8 PC Kit should normally be used to...

Page 32 - How to reach the sales offices in Europe

32 En gl is h European sales offices How to reach the sales offices in Europe Austria Professional Systems Division, Austria Bose Ges.m.b.H., Business Park Vienna Wienerbergstrasse 7, 10 O.G. 1100 Wien, Österreich Telephone: 01-60404340 Fax: 01-604043423 Belgium Professional Systems Division, Belgiu...

Bose ControlSpace AMS-8- User Manual

Table of Contents:

Summary

Other Bose Models