boreal BRS12HPL1IAK - User Manual

Page 3 - Content; Operation Notices; Pipe expanding method

Content Operation Notices Precautions ..........................................................................................................1 Parts Name ..........................................................................................................6 Installation Notice Installation di...

Page 4 - property loss is caused by the following reasons.; DANGER; N OTIC E

Explanation of Symbols Exception Clauses Indicates a hazardous situation that, if not avoided, will Manufacturer will bear no responsibilities when personal injury or 1.Damage the product due to improper use or misuse of the product;2.Alter, change, maintain or use the product with other equipment w...

Page 5 - Precautions; WARNING; Operation and Maintenance

1 Precautions WARNING Do not connect air conditioner to multi-purpose socket. This appliance can be used by children aged from 8 Operation and Maintenance If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a haza...

Page 7 - Attachment; Please install proper power supply cables before using the

Do install the circuit break. If not, it may cause malfunction. of at least 3mm in all poles should be connected in fixed wiring. magnet buckle and heating buckle function, it can protect the circuit-short and overload. power supply circuit and circuit break. Precautions WARNING note the following t...

Page 8 - The grounding resistance should comply with national

Installation must be performed in accordance with the persons in order to avoid a hazard. must be properly grounding with specialized grounding device by a professional. Please make sure it is always grounded effectively, otherwise it may cause electric shock. The appliance must be positioned so tha...

Page 9 - Working temperature range; Maximum cooling

The indoor unit should be installed close to the wall. reachable after finishing installation. far away from animals or plants. If it is unavoidable, please add the fence for safety purpose. 5 Precautions WARNING place, only the qualified person can perform the work. Otherwise, it may cause personal...

Page 10 - Parts Name; Outdoor Unit

Parts Name Outdoor Unit 6 NOTICE: Actual product may be different from above graphics, please refer to actual products. air inlet Connection wire air outlet

Page 11 - Installation dimension diagram

7 Installation dimension diagram Space to the wall Above Above 50cm Air inlet side 00 Space to the obstruction Air outlet side 0 2 m c0 Above Above 30cm 30cm Space to the wall Drainage pipe Above 50cm

Page 12 - To ensure safety, please be mindful of the following precautions.; Warning; system pressure rise or compressor rupture, resulting in injury.; should not exceed 1 minute.; pressure rise or compressor rupture, resulting in injury.; connected before the compressor starts running.; Poor connections may lead to electric shock or fire.; receive no external stresses.; wire terminals may cause electric shock or fire.; Safety precautions for installing and relocating the unit

To ensure safety, please be mindful of the following precautions. Warning When installing or relocating the unit, be sure to keep the refrigerant circuit free from air or substances other than the specified refrigerant. Any presence of air or other foreign substance in the refrigerant circuit will c...

Page 13 - Selection of installation location; Basic requirement; Tools for installation; ● Please contact the local agent for installation.

9 Selection of installation location Basic requirement Outdoor unit Installing the unit in the following places may cause malfunction. If it is un- avoidable, please consult the localdealer: 1.The place with strong heat sources, vapors, flammableor explosive gas, or volatile objects spread in the ai...

Page 14 - Requirements for electric connection; Safety precaution; power supply cables before using the air conditioner.

Requirements for electric connection Safety precaution Grounding requirement 1. Must follow the electric safety regulations when installing the unit. air switch. 3. Make sure the power supply matches with the requirement of air conditioner. Unstable power supply or incorrect wiring or malfunction. P...

Page 15 - Installation of outdoor unit; (select it according to the actual installation situation); at least 3cm above the floor

For the unit with cooling capacity of 2300W Note: installing the outdoor unit. Make sure the support can withstand at least four times of the unit weight. The outdoor unit should be installed at least joint. (for the model with heating tube, the installation height should be no less than 20cm.) ~500...

Page 16 - Step four: connect indoor and outdoor pipes

Installation of outdoor unit Step four: connect indoor and outdoor pipes 1. Remove the wire clip; connect the power connection wire and signal control wire (only for cooling and heating unit) to the wiring terminal according to the color; fix them with screws. 12 1. Remove the screw cap of valve and...

Page 17 - Step six: neaten the pipes

13 Step six: neaten the pipes 1. The pipes should be placed along the wall, bent reasonably and hidden possibly. Min. semidiameter of bending the pipe is 10cm. 2. If the outdoor unit is higher than the wall hole, you must set a U-shaped curve in the pipe before pipe goes into the room, in order to p...

Page 18 - Use vacuum pump

1 4 Vacuum pumping Leakage detection 1. Remove the valve caps on the liquid valve and gas valve and the nut of refri- gerant charging vent. 2. Connect the charging hose of piezometer to the refri- gerant charging vent of gas valve and then connect the other charging hose to the vacuum pump. 3. Open ...

Page 19 - Items to be checked

1 5 Check after installation Test operation Items to be checked Possible malfunction The unit may drop, shake or emit noise. Have you done the refrigerant leakage test? (heating) capacity.It may cause condensation and water dripping. Is water drained well? It may cause condensation and water drippin...

Page 20 - Configuration of connection pipe

Max. length of connection pipe Unit: m 16 1. Standard length of connection pipe ● 5m, 7.5m, 8m. 4. The additional refrigerant oil and refrigerant charging required after prolonging connection pipe ● After the length of connection pipe is prolonged for 10m at the basis of standard length, you should ...

Page 22 - union pipe

1 8 Pipe expanding method Note: Improper pipe expanding is the main cause of refrigerant leakage. Please expand the pipe according to the following steps:A: Cut the pipe ● Confirm the pipe length according to the distance of indoor unit and outdoor unit. ● Cut the required pipe with pipe cutter. pip...

boreal BRS12HPL1IAK - User Manual

Table of Contents:

Summary

Other boreal Air Conditioners Models