boreal BRS12HPJ1IAK - User Manual

Page 3 - Content; Operation Notices; Pipe expanding method

Content Operation Notices Precautions ..........................................................................................................1 Parts Name ..........................................................................................................6 Installation Notice Installation di...

Page 4 - property loss is caused by the following reasons.; DANGER; N OTIC E; compliance with local laws and regulations.

Explanation of Symbols 1.Damage the product due to improper use or misuse of the product;2.Alter, change, maintain or use the product with other equipment without abiding by the instruction manual of manufacturer; After verification, defects are due to improper operation during transportation ofprod...

Page 5 - Precautions; WARNING; Operation and Maintenance

1 Precautions WARNING Do not connect air conditioner to multi-purpose socket. This appliance can be used by children aged from 8 Operation and Maintenance If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a haza...

Page 7 - Attachment; Please install proper power supply cables before using the

Do install the circuit break. If not, it may cause malfunction. of at least 3mm in all poles should be connected in fixed wiring. magnet buckle and heating buckle function, it can protect the circuit-short and overload. power supply circuit and circuit break. Precautions WARNING note the following t...

Page 8 - The grounding resistance should comply with national

Installation must be performed in accordance with the persons in order to avoid a hazard. must be properly grounding with specialized grounding device by a professional. Please make sure it is always grounded effectively, otherwise it may cause electric shock. The appliance must be positioned so tha...

Page 9 - Working temperature range; Maximum cooling

For the air conditioner with plug, the plug should be reachable after finishing installation. The indoor unit should be installed close to the wall. 5 Precautions Select a location which is out of reach for children and far away from animals or plants. If it is unavoidable, please add the fence for ...

Page 10 - Parts Name; Outdoor Unit

Parts Name Outdoor Unit 6 NOTICE: Actual product may be different from above graphics, please refer to actual products. air inlet Connection wire air outlet

Page 11 - Installation dimension diagram

7 Installation dimension diagram Space to the wall Above Above 50cm Air inlet side 00 Space to the obstruction Air outlet side 0 2 m c0 Above Above 30cm 30cm Space to the wall Drainage pipe Above 50cm

Page 12 - To ensure safety, please be mindful of the following precautions.; Warning; system pressure rise or compressor rupture, resulting in injury.; should not exceed 1 minute.; pressure rise or compressor rupture, resulting in injury.; connected before the compressor starts running.; Poor connections may lead to electric shock or fire.; receive no external stresses.; wire terminals may cause electric shock or fire.; Safety precautions for installing and relocating the unit

8 To ensure safety, please be mindful of the following precautions. Warning When installing or relocating the unit, be sure to keep the refrigerant circuit free from air or substances other than the specified refrigerant. Any presence of air or other foreign substance in the refrigerant circuit will...

Page 13 - Basic requirement; Selection of installation location; Outdoor unit; Tools for installation

Basic requirement Selection of installation location 1. Installing the unit in the following places may cause malfunction. If it is unavoidable, please consult the local dealer: 2. The place with strong heat sources, vapors, flammable or explosive gas, or volatile objects spread in the air. equipmen...

Page 14 - Requirements for electric connection; Safety precaution

10 Requirements for electric connection Safety precaution Grounding requirement 1. Must follow the electric safety regulations when installing the unit. air switch. 3. Make sure the power supply matches with the requirement of air conditioner. Unstable power supply or incorrect wiring or malfunction...

Page 15 - Installation of outdoor unit; (select it according to the actual installation situation); at least 3cm above the floor

1 1 ● For the unit with cooling capacity of 2300W Note: installing the outdoor unit. Make sure the support can withstand at least four times of the unit weight. The outdoor unit should be installed at least joint. (f or the model with heating tube, the installation height should be no less than 20cm...

Page 16 - Step four: connect indoor and outdoor pipes

L1 L2 L1 L2 N(1) 2 3 POWER black (brown) (blue) (blue) (yellow- green) (brown) black Installation of outdoor unit Step four: connect indoor and outdoor pipes 1. Remove the wire clip; connect the power connection wire and signal control wire (only for cooling and heating unit) to the wiring terminal ...

Page 17 - ain connector in a Φ25 hole or Φ42 hole

13 Step six: neaten the pipes Outdoor Condensate Drainage (only for Heat pump unit) 1. The pipes should be placed along the wall, bent reasonably and hidden possibly. Min. semidiameter of bending the pipe is 10cm. 2. If the outdoor unit is higher than the wall hole, you must set a U-shaped curve in ...

Page 19 - Use vacuum pump

15 Vacuum pumping Leakage detection 1. Remove the valve caps on the liquid valve and gas valve and the nut of refri- gerant charging vent. 2. Connect the charging hose of piezometer to the refri- gerant charging vent of gas valve and then connect the other charging hose to the vacuum pump. 3. Open t...

Page 20 - Items to be checked; ● Specify the important notes for air conditioner to the cl; Method of test operation; ● Put through the powe

16 Check after installation Test operation Items to be checked Possible malfunction The unit may drop, shake or emit noise. Have you done the refrigerant leakage test? (heating) capacity.It may cause condensation and water dripping. Is water drained well? It may cause condensation and water dripping...

Page 21 - Configuration of connection pipe

1 7 2. Min. length of connection pipe is 3m.3. Max. length of connection pipe. Max. length of connection pipe Unit: m 1. Standard length of connection pipe ● 5m, 7.5m, 8m. 4. The additional refrigerant oil and refrigerant charging required after prolonging connection pipe ● After the length of conne...

Page 23 - union pipe

19 Pipe expanding method Note: Improper pipe expanding is the main cause of refrigerant leakage. Please expand the pipe according to the following steps:A: Cut the pipe the distance of indoor unit and outdoor unit. pipe pipe cutter leaning uneven burr B: Remove the burrs prevent the burrs from getti...

boreal BRS12HPJ1IAK - User Manual

Table of Contents:

Summary

Other boreal Air Conditioners Models