BMW Z3 coupe- User Manual
BMW Z3 coupe– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Kit Contents; s just easier, and therefore cheaper for
- Page 3 – Installation Procedure; Remove the 4, 8mm screws securing your headlight to the car. Pull
- Page 5 – Now let’
- Page 6 – NOT
- Page 7 – s it for that step. Repeat on the other headlight.
- Page 8 – For DDE Lightning PlusTM
ProjectorZ
™
Installation Instructions
BMW Z3/Coupe and ///M Roadster/Coupe
1 of 8
Thank you for purchasing the ProjectorZ™ Projector Lighting System for your BMW. These instructions
will walk you through the few steps required to install the system. Note that this system is compatible
with all versions of the Z3, Z3 Coupe and ///M Roadster or ///M Coupe, regardless of model year or
headlight variation.
1.0
Required Tools
Normal Installation
•
Needle nose pliers
•
A #10 Torx driver (screwdriver or socket type)
•
A medium flat blade screwdriver
•
An 8mm nut driver or socket and ratchet
•
Optional pencil magnet to retrieve and insert mounting screws
•
A 19mm Open End Wrench (recommended)
•
A 17mm and 10mm socket and ratchet
•
Use of a normal kitchen oven
•
A cookie sheet (Disposable or regular)
•
2 oven mitts
•
1 2.8 oz. tube of 100% silicone glue (black or clear)
2.0
Installation Notes and Warranty
Please read completely through the instructions before beginning.
The kit is very easy to install. But you must take your time. It is suggested that you wear eye protection
when installing the system if your product is fitted with the optional DDE Lightning Plus™ rings. All
fluorescent lamps contain small amounts of the element Mercury. If you break a ring do not blow the
debris away or inhale the powder. Wipe up any debris with a damp paper towel and dispose of it. Handle
the rings with care until they are installed inside of the bezel of the headlights and they will provide years
of trouble free operation. Lamps can last for over 100,000 hours of operation.
This procedure assumes that you are familiar with your headlight wiring method. If not, please refer to
your dealer for assistance as required.
Apexcone.com warrants the normal operation of this system for life. Return any non-performing
component for immediate replacement.
Enjoy your product and thank you for your purchase.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ProjectorZ ™ Installation Instructions BMW Z3/Coupe and ///M Roadster/Coupe 2 of 8 3.0 Kit Contents Each system contains different contents based on the options. This means that you may have components in the kit left over that do not apply to your option level. If you follow the installation instru...
ProjectorZ ™ Installation Instructions BMW Z3/Coupe and ///M Roadster/Coupe 3 of 8 4.0 Installation Procedure Remove the 4, 8mm screws securing your headlight to the car. Pull light forward to access and remove the low, high and parking lamp connections. The entire installation can be done by removi...
ProjectorZ ™ Installation Instructions BMW Z3/Coupe and ///M Roadster/Coupe 5 of 8 Once you have the lenses out, fit the new bezels into the old openings. Note the shape of each removed lens and replace with the properly shaped new black bezel with CNC aluminum trim. Silicone them into place with bl...
