BMW E65- User Manual

Page 2 - INDEX

-. Updated points on this version-. Precaution-. Main Spec.-. System Composition-. Outline Dimension-. External Appearance -. Connector Pin Assignment-. DIP Switch Setting -. How to use OSD Keypad-. OSD (On Screen Display) -. FMTX Frequency Setting-. How to use parking guide line-. CAN Wiring -. Pro...

Page 3 - Updated points on this version

Updated points on this version - FMTX Module is added in the product. (No need additional FMTX Module for Audio) - Offering OSD Key Pad (The remote control is not offered anymore) - Possible to move the displayed position of Navi (Only on RGB mode) - Changed OSD MENU

Page 4 - Precaution

- You must keep the car key taken off from the car while you work this and finally, connect power of the interface. - When to connect the interface cable, you must keep the power cable taken off. - You must work this at the environment without any static electricity or damages. - All of process on t...

Page 6 - System Composition

DISPLAY (CAR MAIN BOARD) A/V 1 NAVIGATION Input (Analog RGB) CVBS In (Rear camera) System Composition Car Screen Input A/V 2A/V 3 VIDEO CIRCUIT VIDEO MUX MCU Power Input (+8VDC ~ +24VDC) POWER CIRCUIT Dip S/W A/V OUT HEADREST MONITOR OSD keypad Switch for source toggle OEM Navi Button (Can Interface...

Page 7 - Outline Dimension

Outline Dimension 149mm * 91mm * 19mm ※ This can change under manufacturer's circumstance 149mm 91mm 19mm

Page 8 - External Appearance

External Appearance ※ This can change under manufacturer's circumstance LCD- IN/OUT LED CAN I/F RGB (IN) KEY PAD A/V(IN/OUT) POWER DIP S/W MODE

Page 10 - Connector Pin Assignment

Connector Pin Assignment ① ② ③ ④ ⑤ ⑥ ⑦ ① R DATA (RED) ② G DATA (GREEN) ③ B DATA (BLUE) ④ SYNC (WHITE) ⑤ GND (BLACK) ⑥ NAVI IR (WHITE) ⑦ DVD IR (BLACK) *RGB-IN Connect ※ This can change under manufacturer's circumstance ① GND (BLACK)② I-Drive (ORANGE)③ FMT-Antenna (BLUE)④ N.C⑤ ACC(RED)⑥ REAR(GREY) *P...

Page 13 - DIP SW

DIP SW #PIN FUNCTION DIP S/W Selection 1 RGB INPUT MUTE ON : Skipping RGB ModeOFF : RGB Display 2 A/V 1 MUTE ON : Skipping A/V 1OFF : A/V1 Display 3 A/V 2 MUTE ON : Skipping A/V 2OFF : A/V2 Display 4 A/V 3 MUTE ON : Skipping A/V 3OFF : A/V3 Display 5 To select monitor size ON : 6.5” LCD Setting OFF ...

Page 15 - How to use OSD Keypad

How to use OSD Keypad MENU : OSD MENU, Going back to the last step of setting after mode setting SEL : Select, Mode change UP : Move to Left, Up DOWN : Move to Right, Down *FACTORY MODE : Operated with pressing UP->DOWN->UP->MENU keys of the keypad sequently.

Page 17 - · Analog RGB Mode · Video Mode

OSD(On Screen Display) · Analog RGB Mode · Video Mode OPTION Menu OSD H_POS : Move of OSD window to Left, Right OSD V_POS : : Move of OSD window to Up, Down OSD TRANS : OSD window transparency setting SCREEN MODE : Screen Rate setting (4:3, 16:9) INITIAL : Initializing OSD setting value

Page 20 - FMTX Frequency Setting; Factory Default

FMTX Frequency Setting Get the Factory Mode Operated with pressing UP->DOWN->UP->MENU keys of the keypad sequently Set “FM-TX USE” to “ON” like the left picture . (‘ON’ is Default). control the frequency by “UP”, “Down” keys. At the bottom, you can see present frequency and control it from ...

Page 21 - How to use parking guide line; When the car is in reverse, if

How to use parking guide line ① ① When the car is in reverse, if press ‘UP’ key for 2 sec, the guide line appears on the screen. ② ② If you need to move the line position, press ‘SEL’ key on the above step. (Use ‘Up’, ‘Down’ Key of Keypad) Factory Default : DISPLAY - DISABLE

Page 22 - key again, you can move the

How to use parking guide line ③ ③ On step no.2, once press “SEL” key again, you can move the line vertically by “UP”, “Down” keys.

Page 23 - CAN Wiring; E65 CAN Wiring Diagram

CAN Wiring E65 CAN Wiring Diagram Green: CAN LOW Orange: CAN HIGH

Page 24 - Product Composition

Product Composition OSD Keypad : 1 EA Power Cable : 1 EA LCD In/OUT Cable : 1 EA A/V Cable : 1 EA Navi Cable : 1 EA Ground Cable (For Keypad) : 1 EA Toggle S/W : 1 EA (Optional) CAN Cable : 1 EA

Page 25 - FAQ

FAQ 1. When can not change mode. -. Check if the Ground Cable (OSD Keypad) is connected or not. -. Check if LED is turned on or not. If it is not turned on, Check if power cable is connected or not.-. Check if CAN is connected well. 2. When the screen is displaying only black color.-. Check if 2nd L...

Table of Contents:

Summary

Other BMW Models