Blue Sea Systems PN7520 - Manual

Blue Sea Systems PN7520

Blue Sea Systems PN7520 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – Display Indicators; Charge Output; Charge Stage; Alert
  • Page 3 – Alerts and Diagnostics; Battery Temperature Alert Screen; DC Reverse Polarity or Short Circuit:; Buttons
  • Page 4 – Cable Connection; Dimensioned Drawing
Loading the manual

Blue Sea Systems Inc.

p 360.738.8230

425 Sequoia Drive

f 360.734.4195

Bellingham, WA 98226 USA

[email protected]

www.bluesea.com

980016790 Rev.001

Warranty

GUARANTEE: Blue Sea Systems stands behind its products for as long

as you own them. Find detailed information at www.bluesea.com/about.

For customer service, call 800-222-7617.

Minimum Operating Temperature

−20

°

C (−4

°

F)

Maximum Operating Temperature

60

°

C (140

°

F)

Minimum Storage Temperature

−30

°

C (−22

°

F)

Maximum Storage Temperature

70

°

C (158

°

F)

Electrical Specification:

On State Operating Current

<300mA sourced from charger

Communications:

Protocol

Proprietary

Maximum Cable Length

150 ft (45.7 m)

Cable

Cat5e (Standard US)

Mounting Hole Cutout

1-1/4

"

(31.75 mm)

Dimensions Height:

3.01

"

(76.56 mm)

Width:

4.15

"

(105.46 mm)

Depth:

.95

"

(24.01 mm)

Mounting Hardware Included

#6 Screws

Regulatory

Surface Mount Gasket creates an IP67 waterproof seal on unit face--temporary

immersion for 30 minutes.

Specifications

Indicates battery charger stage, alerts, and controls basic

battery charger functions

LED Indicators

• Charging: Quick check for green light confirms charging
• Charge Stage: Displays charging stage including PreFloat for each battery
• Equalize: Indicates when the charger is in equalization mode
• Fan Mode: Indicates charger’s internal fan mode
• Charge Output: Displays the percentage of output current for each battery.

Will also indicate maximum output setting when maximum output is adjusted
to accommodate for AC source limitations.
• Alert: Provides warning and alert status for quick diagnostics

Four Control Buttons

• Fan: User adjustable settings (OFF, LOW, or HIGH)
• Dim/ Alarm: Provides adjustment to brightness of LEDs on display as well
as Silence function for alarms.
• Output: User adjustable charger output when AC source limitations exist
that require lowering the AC current draw.
• Standby: Places P12 Battery Charger into standby mode

P12

Instr uctions

PN 7520 / PN 1521

B A T T E R Y C H A R G E R R E M O T E

1 of 4

Scan for
additional
product
information

Included Components

1. Mounting Screws: (4) #6 x 1" pan-head sheet metal screws (#2 Phillips screwdriver)

2. Cover

3. Remote Assembly

4. Mounting Gasket

5. 25 ft (7.6 m) Cat5e Cable

6. Dielectric Grease: Blue Sea Systems recommends using a high quality dielectric grease

for remote control connection. View the MSDS for the Dielectric

Grease at bluesea.com/P12

1

2

3

4

5

6

Register your P12 Remote Display at bluesea.com/warranty

Blue Sea Systems stands behind its products for as long as you own them. Blue Sea
Systems will replace or issue a credit for any of its products found to be defective in
materials or manufacture. P12 Battery Chargers and P12 Remote Displays are warranted
for a period of five years from the date of first purchase. No compensation will be allowed
for products not returned to Blue Sea Systems for analysis, nor will compensation be made
for labor required to replace any defective product. Please contact Customer Service for an
RMA number prior to shipping any product back to Blue Sea Systems. Blue Sea Systems
cannot accept liability for damage due to the use of the P12 Battery Charger.

“Date of first purchase” means:

1. The date on which the product was purchased by the first retail customer
2. The date on which the first retail customer purchases a vessel on which the product
was installed

Blue Sea Systems will (at its sole discretion) repair or replace any product which is:

1. Proven to be defective in materials or workmanship
2. Returned to Blue Sea Systems (or its agent) during the warranty period in accordance
with this warranty

The replacement battery charger may be new or refurbished in as-new condition. Such
repair or replacement will be the sole remedy by Blue Sea Systems under this warranty.
Any repaired or replacement product will be warranted in accordance with this warranty for
the unexpired balance of the warranty period on the original product.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Display Indicators; Charge Output; Charge Stage; Alert

Display Indicators 1. Charging: SOLID ON (Green): Indicates Charging mode and will operate according to its charging stage. BLINKING (Green): Transitioning from Standby to a Charging state. OFF: Standby mode - will not charge a battery or supply current to loads. 2. Charge Stage: Bulk- BLINKING (Gre...

Page 3 - Alerts and Diagnostics; Battery Temperature Alert Screen; DC Reverse Polarity or Short Circuit:; Buttons

Alerts and Diagnostics 5. Thermal Regulaton: SOLID ON (Yellow): The charger temp output limit LED indicator will blink to notify the user that the charger is limiting its output to protect itself from eventual overheating. The most common correction for this state is to increase the fan speed to Hig...

Page 4 - Cable Connection; Dimensioned Drawing

P12 Batter y Charger Remote P12 Batter y Charger RJ45 Port Blue Sea Systems Inc. 425 Sequoia Drive Bellingham, WA 98226 USA p 360.738.8230 f 360.734.4195 [email protected] www.bluesea.com 980016790 Rev.001 4 of 4 Cable Connection The P12 Battery Charger Remote uses one Cat5e cable for communicat...

Other Blue Sea Systems Models

All Blue Sea Systems Other