Black Box KV7020A - Manual - manualsarea.com

Page 2 - FCC AND IC RFI STATEMENTS; FEDERAL COMMUNICATIONS COMMISSION; Class B Digital Device.; CAUTION

1 FCC AND IC RFI STATEMENTS FEDERAL COMMUNICATIONS COMMISSION and INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules.These limits are de...

Page 3 - que el aparato eléctrico sea operado.

2 2- AND 4-PORT SERVSWITCH DT PRO II NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser...

Page 4 - NOM STATEMENT

3 NOM STATEMENT 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos,poniendo particular aten...

Page 5 - TRADEMARKS USED IN THIS MANUAL; Linux is a registered trademark of Linus Torvalds.

4 2- AND 4-PORT SERVSWITCH DT PRO II TRADEMARKS USED IN THIS MANUAL iMac, Mac, Macintosh, and Mac OS are registered trademarks of Apple Computer,Inc. BLACK BOX and the Double Diamond logo are registered trademarks, andServSwitch is a trademark of BB Technologies, Inc. PS/2 is a registered trademark ...

Page 6 - CONTENTS; Contents; Chapter

5 CONTENTS Contents Chapter Page 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.1 Introduction ....

Page 7 - Supported Operating Systems:; Windows; Temperature Tolerance:

6 2- AND 4-PORT SERVSWITCH DT PRO II 1. Specifications Resolution: 2048 x 1536 Supported Operating Systems: Windows ® 98/Me/2000/XP and Windows NT ® , Linux ® , NetWare ® , Mac OS ® Hotkeys: Yes User Controls: KV7020A: (2) port selection buttons; KV7021A: (4) port selection buttons Connectors: KV702...

Page 8 - CHAPTER 1: Specifications

7 CHAPTER 1: Specifications Power: 9-VDC power supply Size: KV7020A: 1.8"H x 5.4"W x 3.5"D (4.5 x 13.8 x 9.1 cm); KV7021A: 1.8"H x 8.7"W x 4.1"D (4.5 x 22 x 10.5 cm) Weight: KV7020A: 1.8 lb. (0.8 kg); KV7021A: 2 lb. (0.9 kg)

Page 10 - Component

9 CHAPTER 2: Overview 2.2 Components 2.2.1 F RONT P ANEL Figure 2-1 shows the 2- and 4-Port ServSwitch front views. Table 2-1 describes thecomponents numbered in the illustration. Figure 2-1. The Ser vSwitch front-panel views. Table 2-1. Front-panel components. Component Description 6-pin mini-DIN c...

Page 12 - • This user’s manual; What You’ll Need to Supply

11 CHAPTER 2: Overview 2.3 What’s Included The KV7020A or KV7021A package should contain the following items. If anythingis missing or damaged, please contact Black Box. • (1) 2- or 4-Port ServSwitch DT Pro II KVM Switch • (1) Power supply for U.S., Europe, Great Britain, and Australia • This user’s...

Page 13 - ServSwitch Placement; • How far away are the computers from the console?; Hardware Installation; Connect your USB keyboard and USB mouse or PS/2 keyboard and PS/2

12 2- AND 4-PORT SERVSWITCH DT PRO II 3. Installation 3.1 ServSwitch Placement The 2- or 4-Port ServSwitch DT Pro II KVM Switch is small, portable, and designedto fit on a desktop. Consider the following when deciding where to place the KVMswitch: • How long are the cables attached to your keyboard,...

Page 14 - CHAPTER 3: Installation

13 CHAPTER 3: Installation Figure 3-1. Keyboard and mouse connections. 3. Connect the HD15 VGA male connector from your monitor to the console VGA port on the back of the ServSwitch. See Figure 3-2. Figure 3-2. Console connections. 4. Connect the speaker and microphone connectors from your computer ...

Page 16 - USB Installation; NOTE

15 CHAPTER 3: Installation 3.2.3 C ONNECTING THE C OMPUTERS USB Installation 1. Connect the ServSwitch DT Pro II’s USB cable’s (EHN7002021-0006) USB connector to the PC1 USB port on the back of the ServSwitch. Connect thecable’s VGA connector to the ServSwitch unit’s PC1 VGA connector. SeeFigure 3-5...

Page 17 - USB P

16 2- AND 4-PORT SERVSWITCH DT PRO II 3.2.4 C ONNECTING THE USB P ERIPHERALS Attach up to two USB peripherals to the USB Type A connectors on theServSwitch. See Figure 3-6. NOTE You can attach a USB keyboard and mouse, but hotkey switching willnot be enabled for these connections. Figure 3-6. USB pe...

Page 18 - seconds. The switch will beep to indicate that it’s in hotkey mode.

17 CHAPTER 4: Operation 4. Operation 4.1 Powering Up the System Once all cables have been connected and all computers have been powered on,the ServSwitch emulates mouse and keyboard signals on each port, enabling yourcomputer to boot normally. The ServSwitch is now ready for use. 4.2 Selecting Compu...

Page 19 - Command; Select hub port control.

18 2- AND 4-PORT SERVSWITCH DT PRO II Table 4-1. Hotkey commands. Command Command/Description <Left-Ctrl><Left-Ctrl> x Select PC channel. Select active PC channel.(x is a top-row number key) x=1–2 or 1–4 for PC channel number <Left-Ctrl><Left-Ctrl> ( Fx) Select hub port contr...

Page 20 - Bind PC and audio/microphone

19 CHAPTER 4: Operation Table 4-1 (continued). Hotkey commands. Command Command/Description <Left-Ctrl><Left-Ctrl> Q Bind PC and audio/microphone switching. Enable the binding of PC port and audio/microphone switching. (Once enabled, any PC and/or audio/microphone switching is bound toge...

Page 21 - Autoscan with programmable delay

20 2- AND 4-PORT SERVSWITCH DT PRO II Table 4-1 (continued). Hotkey commands. Command Command/Description <Left-Ctrl><Left-Ctrl> S Autoscan. Autoscan through every connected channel for quick screen browsing of each channel (scan delay=10 seconds). <Left-Ctrl><Left-Ctrl> S + ...

Page 22 - Appendix. Troubleshooting; A.1 Calling Black Box; • the nature and duration of the problem.; A.2 Shipping and Packaging

21 Appendix. Troubleshooting A.1 Calling Black Box If you determine that your 2- or 4-Port ServSwitch DT Pro II KVM Switch ismalfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box at 724-746-5500. Before you do, make a record of the histo...

Black Box KV7020A - Manual

Table of Contents:

Summary

Other Black Box Models