BISSELL PROHEAT2X 8920- User Manual

16 6 How To Put It Together How to Use this Guide This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this G...

16 7 Special Features of Your BISSELL ProHeat 2X Your BISSELL ProHeat 2X Deep Cleaner is a home cleaning system that uses the power of heat and brushes to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in ...

16 Plan activities to give your carpet time to dry Move furniture to another area if cleaning an entire room (optional) Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning Pretreating (optional) Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet ...

16 Emptying and Re-filling the Tanks . Remove the Water Tank from the base using the Tank Carry Handle. Carry the Tank like a bucket to a utility sink or outside where you will dispose of the collection water. Unlatch the top of the Tank from the bottom by lifting the Tank Latch. Taking the bottom p...

16 Turn Power and Heater switches OFF ( O ) . Unplug the machine and wrap the power cord. After emptying the Water Tank, rinse it out at a fau-cet with running hot tap water, taking care to clean underneath the Heavy Duty Bladder, and all around it. The top half of the Tank can be rinsed clean throu...

16 Your ProHeat 2X machine comes equipped with a hose and at least 1 attachment for cleaning stairs, upholstery, and more. Important! If using to clean Upholstery, check Upholstery Tags. A. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat 2X. If the tag...

16 Empty Water Tank and rinse out, following the instructions on page 11. Return Ready Tools Dial to Floor Setting. Keep plenty of genuine BISSELL Fiber Cleansing Formula™ and Scotchgard™ protector cartridges on hand so you can clean and protect whenever it fits your schedule. Always use genuine BIS...

16 Be sure to test any spot removal formulas in an inconspicuous area first. This is important as some dyes and materials could be damaged or discolored by cleaning solvents. If such a change should occur, try a different solution or call a professional. If cleaning on Berber carpeting, gently run y...

16 Bare Floor Cleaning (Continued) Slowly move the machine forward and back over bare floor surface one time while depressing trigger. Caution: Do not overwet. Repeat the motion without pressing the trigger using the Bare Floor tool to squeegee and suction up the dirty water. Allow approximately 30 ...

16 Brushes can be removed for cleaning or replacement as desired. Follow Belt Removal Instructions on page 17. Remove Brush Rolls by pulling them off of the metal rods. Place Cleaned or New Brush Rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the r...

16 Troubleshooting Built-in Heater Ready Light does not illuminate. Possible Causes: Remedies: The Heater Switch is not turned ON ( I ) Turn the Heater Switch ON ( I ). The Power Switch is not turned ON ( I ) Both switches must be ON ( I ) to activate the Heater Ready Light. Reduced Spray or No Spra...

16 Troubleshooting (Continued) Cleaner not picking up solution Possible Causes: Remedies: Ready Tools Dial may be at wrong setting Set Ready Tools Dial to either Floor Cleaning or Hose Attachments Setting. Tank may not be seated properly Pick up both the Water Tank and Formula Tank and reseat them s...

16 BISSELL Consumer Services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. EST Saturday 9 a.m. — 8 p.m. EST Or write: BISSELL HOMECARE, INCPO Box 3606Grand Rapids MI 49501ATTN: Con...

22 Replacement parts - BISSELL ProHeat 2X ® Replacement Parts Below is a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item Part No. Part Name 1 203-6651 3” Tough Stain Tool 2 203-6652 Power...

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular ma...