BISSELL BISSELL3415 - User Manual

10

6

BISSELL.com

3

WARNING

To reduce the risk of electrical shock:

• Turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

• Before using your vacuum, make sure that the dirt tank is in locked position and that all filters, both pre- and post-filters, are in

place. DO NOT operate your vacuum without these filters.

• Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the dirt tank.

• Do not use without filters in place.

Protecting the Vacuum’s Motor

For more assistance with your vacuum’s motor protection, visit

support.BISSELL.com

.

There is an internal thermal protector in your vacuum that protects it from overheating. It controls

the main vacuum motor only, not the brush motor. When it activates, the main motor will stop.

The front lights and brush roll will stay on but there won’t be any suction. If this happens, follow

these steps:

1.

Turn vacuum OFF and unplug from electrical outlet.

2.

Check for the source of overheating problem (full dirt tank, dirty filters or a clog) and fix by

following the steps in the “Vacuum won’t pick up dirt” troubleshooting section.

3.

When the motor cools for approximately 30 minutes, the thermal protector automatically resets

and cleaning may continue. If the vacuum will not turn ON or the thermal protector continues to

activate, contact Consumer Care.

©2023 BISSELL Inc. All rights reserved.

Part Number 1628649 01/23 RevE

Troubleshooting

For a comprehensive walkthrough of your product and support tips visit

support.BISSELL.com

.

Meet your new BISSELL® product!

Go to

support.BISSELL.com

for a comprehensive walkthrough

of your new purchase, including videos, tips, support, and more.
Want to get started right away? This guide has all the information
you need to set up your new product. Let’s take a look…

Product Overview

1. Carpet Type Control
2. Hose
3. Quick Release Extension Wand
4. Wand Release Button
5. Power Switch
6. Dirt Tank Release Button
7. Pre-Motor Filter

8. Dirt Tank
9. Post-Motor Filter
10. Lift-Off® Release Button

2

3

7

8

9

1

5

What’s in the Box? ......................................................... 2

Assembly .............................................................................. 3

Using Your Vacuum ....................................................... 3

Above Floor Cleaning ..................................................4

Emptying the Dirt Tank...............................................4

Cleaning the Inner Cyclone Separator .............4

Cleaning and Replacing the Filters ..................... 5

Protecting the Vacuum’s Motor ............................6

Resetting the Brush Motor .......................................6

Warranty ...............................................................................6

Troubleshooting ...............................................................6

Every Purchase Saves Pets

™

BISSELL proudly supports BISSELL Pet Foundation®

and its mission to help save homeless pets. When you

buy a BISSELL® product, you help save pets, too. We’re

proud to design products that help make pet messes,

odors and pet homelessness disappear.

Visit

BISSELLsavespets.com

to learn more.

Warranty

Limited 5-year warranty, may vary by state. Visit

support.BISSELL.com

or call 1-800-237-7691

for complete warranty information.

1.

Insert handle into body until

it clicks into place.

2.

Attach Lift-Off® pod to foot.

3.

Attach hose to wand by

twisting clockwise.

4.

Insert hose connector into

machine until it clicks.

5.

Insert hose into hose clip.

The hose should sit on the

vacuum without any twists.

6.

Attach tools to tool holders

on vacuum.

Assembly

Go to

support.BISSELL.com

for assembly videos.

Using Your Vacuum

For additional ways to use your vacuum’s features, check out

support.BISSELL.com

.

1.

Power ON ( ). Brush roll will

turn on automatically and will

sense floor type.

2.

Step gently on base and pull

the handle back to recline.

Note:

The brush roll shuts

OFF when vacuum is locked in

upright position.

3.

Use the carpet type control

for optimized cleaning on

high pile and low pile carpet.

The control can be moved

to the middle position for

medium pile carpeting.

Resetting the Brush Motor

For more assistance with your vacuum’s brush motor, visit

support.BISSELL.com

.

There is a circuit to protect the brush motor. If something becomes lodged in the foot and the brush

shuts off, turn the cleaner off and unplug from the outlet. Remove the obstruction. The brush will

automatically reset when the cleaner is plugged in and turned back on.

SURFACESENSE ® LIF T- OFF

VACU U M CLE AN ER

MODEL S 3 415 , 3 4152, 3 41 8 , 3 413

6

4

Note:

Any other maintenance or servicing not included in this manual should be performed by an

authorized service representative.

Note:

When finished using the product, rewind cord for storage. Store unit indoors in a dry location in

an area where the product is not likely to get damaged.