BISSELL BISSELL2306 - User Manual

www.BISSELL.com 6 Filling Your Clean Water Tank Lift the clean water tank straight up to remove from the machine. The clean water tank is located on the back of the machine. Clean Water Tank Dirty Water Tank For small area cleaning (<350 sq ft) a. Fill formula tank with warm tap water to the firs...

www.BISSELL.com 7 Cleaning Your Hard Floors Select cleaning mode: To start cleaning your hard floors, turn the machine ON pressing the HARD FLOOR button. Once the setting is selected, the dry vacuum will turn on. To turn OFF, press the HARD FLOOR setting a second time. Before each use, hold the solu...

www.BISSELL.com 8 Cleaning Area Rugs Before each use, hold the solution spray trigger for 10 seconds to prime the system with cleaning solution. LED lights illuminate when holding the trigger. NOTE: When solution is flowing, you will see bubbles forming at the edges of the brush roll window. To clea...

www.BISSELL.com 9 Maintenance: Rinse and Storage Tray WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Place unit on rinse and storage tray. Turn the machine ON by pressing the Ha...

www.BISSELL.com 10 Maintenance: Rinse and Storage Tray (cont.) WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Replace the brush roll window by first lining up the brush window t...

www.BISSELL.com 11 Maintenance: Dirty Water Tank To release dirty water tank, press down on recessed button on the top of the dirty tank. Grasp top of dirty water tank in recessed areas on each side of the filter and pull upward to remove the top of the tank. Pour dirty water out. Rinse the inside o...

www.BISSELL.com 13 Maintenance: Brush Roll and Chamber WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Grasp brush roll window at the front and pull upward to remove. With warm w...

www.BISSELL.com 14 Problem Possible causes Remedies Reduced spray OR no spray Clean water tank may be empty Refill tank Clean water tank may not be seated completely Turn power OFF / Remove and reseat tank System isn’t completely primed Hold trigger for 10 to 15 seconds Brush window is not latched i...

www.BISSELL.com 15 If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care. Websit...

16 ©2017 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 161-3888 11/17 RevA Visit our website at: www.BISSELL.com Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: Visit www.BISSELL.com/registration !...