BISSELL 3750 EN- User Manual

Slide the end of the Hose Grip onto the Hose Grip Base.Place the Hose into the Hose Clip. NOTE: The Powerfoot will not operate effectivelyunless the Hose is firmly attached to the base. Snap the Telescoping Extension Wand, Crevice Tool, andCombination Tool into the storage clips as shown. The Power ...

The Powerfoot on your BISSELL Lift-Off can be adjusted to cleanseveral floor surfaces. NOTE: For optimal cleaning performance, adjust tothe lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. Place Handle in Upright Position. Turn Height Adjustment Knob...

The Detachable Canister feature makes it possible to easily takethe powerful cleaning action of your BISSELL Lift-Off to stairways,auto interiors, and other hard-to-reach areas of your home.Before detaching the Canister, your Lift-Off must be in its fullyUpright Position. You do not need to turn off...

To maintain maximum cleaning performance, the following maintenance steps must be performed: Empty the Dirt Container when the dirt reaches the “Full”line on the side. Check the Upper Tank and Pre-Motor Filters monthly andclean and replace as needed. Replace the HEPA Media Post-Motor Filter every si...

Use only BISSELL Replacement Filters in your BISSELL Lift-Off.Upper Tank Filter 203-1085 Unplug the cleaner from electrical outlet. The Upper Tank Filter can be reached by removing theDirt Container, reaching underneath the Upper Tank andturning the rim of the Filter Frame to unlock. Pull straightdo...

You should check your vacuum cleaner’s Rotating Floor Brush andDrive Belt regularly for wear or damage. You should also clean thebrush and brush ends of strings, hair, and carpet fibers. These canwrap around the brush and hamper its ability to effectively cleanyour carpet. Also remove any debris tha...

Use only BISSELL Style 8 Replacement Belts (#3200) in your BISSELL Lift-Off. Unplug cleaner from electrical outlet. With Rotating Floor Brush removed from vacuum cleaner (Steps 1-5of Check Rotating Floor Brush and Drive Belt), grasp old Drive Beltand remove from Motor Pulley. Discard old Drive Belt....

Low suction or poor pickup may be due to a clog in the vacuum cleaner. Ifyou notice a change in the sound of the motor or a reduction in the spinningaction, check for clogs. Unplug cleaner from electrical outlet. Empty Dirt Container. Check Upper Tank for build up or clogs. Remove the Upper Tank and...

Vacuum cleaner won't run. Possible Causes Remedies Power cord not firmly plugged in Check electrical plug Blown household fuse or breaker Check/replace fuse - Reset breaker Thermal protector activated Allow cleaner to cool for 30 minutes, see pg. 13 No Power at Rotating Floor Brush. Possible Causes ...

1 For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or write: BISSELL Homecare, Inc.PO Box 3606Grand Rapids, MI 49501ATTN: Consumer Services Or visit the...

1 6 This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, pleasecontact BISSELL Consumer Services by E-mail, telephone, or regular...