BISSELL 3590 - User Manual - manualsarea.com

Page 2 - Thanks for buying a BISSELL CleanView

2 Thanks for buying a BISSELL CleanView ™ We’re glad you purchased a BISSELL CleanView Vacuum. Everything we know about floor care went into the design and construction of thispowerful, high-tech home vacuuming system. Your BISSELL CleanView is well made, and we back it with a limited comprehensive ...

Page 3 - IMPORTANT; When using an electrical appliance,

3 IMPORTANT SAFETY INSTRUCTIONS ■ Keep openings free of dust, lint, hair, etc. ■ Keep appliance on a level surface. ■ Turn off all controls before unplugging. ■ Unplug by grasping the plug, not the cord. ■ Be extra careful when cleaning stairs. ■ Pay close attention when working around children. SAV...

Page 5 - How To Use This Guide

5 This User’s Guide has been designed to help you get the most satisfaction from your BISSELL CleanView. You’ll find assembly andoperating instructions, safety precautions, as well as maintenance andtroubleshooting instructions. Please read this User’s Guide thoroughlybefore assembling your vacuum c...

Page 6 - Lowest Setting; - For short and medium; Highest Setting; How To Use Your BISSELL CleanView

6 Press the Handle Release Pedal with your foot to placeyour CleanView into one of three cleaning positions. Upright- For storage and above floor cleaning with tools. Normal Cleaning- Press Handle Release Pedal once. Usefor most household floor cleaning tasks. Low Cleaning- With the vacuum in normal...

Page 7 - Special On-Board Tools

7 Your BISSELL CleanView is not only a powerful carpet and rugvacuum cleaner, it’s also a versatile above floor vacuum cleanerwhen you select one of the special tools. Raise Handle to Upright Position. Grasp the Quick Reach Handle and lift Hose Wand to separate from suction intake opening. Attach to...

Page 8 - Cleaning The Upper Tank & Filter; Full Line; Cleaning The Pre-Motor and Post-Motor Filters

8 The Dirt Container needs to be emptied when the dirtreaches the “Full” line on the side of the Container. Unplug cleaner from electrical outlet. Slide the Lock ‘n Seal Lever to the "Unlock" position. Grasp handle and pull the Dirt Container straight out toremove from vacuum. Empty dirt int...

Page 9 - Cleaning The Pre-Motor and Post-Motor Filters Continued; Brush; Replace Drive Belt

9 The Post-Motor Filter assists in the filtration process toreturn clean air to the room. It is located behind the dooron the side of the cleaner. If the filter becomes dirty,open the door, remove the filter and clean. Note: A white, pleated HEPA Media Filter is offeredas an optional item. This filt...

Page 10 - Clearing Clogs; Air Passageway; Troubleshooting; Possible Causes

10 Place new Drive Belt over Motor Pulley and stretch otherend over Rotating Floor Brush in the space between the bristles. Place ends of Rotating Floor Brush down into slots onsides as shown. Turn Rotating Floor Brush by hand several times in the direction of Motor Pulley. If properly installed, Dr...

Page 11 - If your BISSELL product should require service:; Friday; Or visit the BISSELL website -; Troubleshooting Continued

11 Vacuum cleaner won't pick up dirt continued. Possible Causes Remedies Broken or worn Drive Belt Replace Drive Belt, see pg. 9 Rotating Floor Brush bristles worn Replace brush Rotating Floor Brush jammed Remove brush and clean debris from brush ends Clog in vacuum Follow instructions on pg. 10 for...

Page 12 - Replacement Parts – BISSELL CleanView Series; About Your Warranty; Limited Two Year Warranty

Item Part No. Part Name 1 32074 Style 7 Drive Belt (2-Pack) 2 203-1063 Crevice Tool 3 203-1083 Dusting Brush 4 203-1084 Extension Wand 5 603-1164 Vacuum Hose 6 203-2032 Brush Roll 7 203-1085 Upper Tank Filter 8 203-1073 Pre-Motor Filter 9 203-1009 Post-Motor Filter 10 32076 HEPA Media Post-Motor Fil...

BISSELL 3590 - User Manual

Table of Contents:

Other Manuals for BISSELL 3590

Summary

Other BISSELL Models