Belkin F5D7632uk4v3000 - Manual

5 Introduction 5 2 1 3 4 5 6 7 8 9 10 se ct io n Benefits of a Home Network By following our simple setup instructions, you will be able to use your Belkin home network to:• Share one high-speed Internet connection with all the computers in your home • Share resources, such as files, and hard drives...

7 6 Make Sure You Have the Following 7 6 Package Contents • ADSL Modem with Wireless G Router • RJ11 Telephone Cord - Gray • RJ45 Ethernet Networking Cable — Yellow • USB 1.0 Cable — Blue • ADSL Microfilter* • Power Adapter • User Manual CD*ADSL microfilter varies by country. If it’s not included, y...

7 Knowing your Router 7 ADSL LED Power LED LAN Status LED (1-4 ) Wireless LAN ( WLAN ) Status LED Internet LED The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the ...

������ �������� �������� ������ � � � � � ����� 11 10 Connecting your Router 11 10 Positioning your Router Your wireless connection will be stronger the closer your computer is to your Router. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your...

������ �������� �������� ������ � � � � � ����� 11 Connecting your Router 11 se ct io n 2 1 3 4 5 6 7 8 9 10 Connecting your ADSL Line Connection for the Router to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built-in splitter to allow simulta...

������ �������� �������� ������ � � � � � ����� 13 12 Connecting your Router 13 12 3. If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the gray RJ11 port labeled “DSL line” on the back of your Router. 4. If you have an ...

13 13 se ct io n 2 1 3 4 5 6 7 8 9 10 3. Turn on your computers. After your computers boot up, the LAN status LED on the front of the Router will be on for each port to which a wired computer is connected. These lights show you the connection and activity status. Now you are ready to configure the R...

15 15 se ct io n 2 1 3 4 5 6 7 8 9 10 Connecting your Router 6. Now the Wireless LAN Setup screen will show. You can connect to the Router via a wireless-LAN-enabled computer with the following default wireless LAN settings:SSID = Belkin54g Wireless Channel = Auto Security = off Note: Belkin strongl...

17 16 17 16 7. Double-check the settings shown on the following screen. You can click “Back” to change the settings or click “Next” to confirmNote: You can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting. 8. Congratulations! You have finished installing ...

17 17 se ct io n 2 1 3 4 5 6 7 8 9 10 12 Understanding the Web-Based User Interface The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. 1. Quick-Navigation Links You can go directly to any of the Router’s UI pages by click...

19 18 Manually Configuring your Router 19 18 4. Login/Logout Button This button enables you to log in and out of the Router with the press of one button. When you are logged into the Router, this button will change to read “Logout”. Logging into the Router will take you to a separate login page wher...

19 Manually Configuring your Router 19 se ct io n 2 1 3 4 5 6 7 8 9 10 Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and changed here. LAN Settings Clicking on the header of the LAN tab (A) will take you to the LAN tab’s header page. A quick description of...

21 Manually Configuring your Router 21 se ct io n 2 1 3 4 5 6 7 8 9 10 5. Lease Time Lease time is the length of time the DHCP server will reserve the IP address for each computer. We recommend that you leave the lease time set to “Forever”. The default setting is “Forever”, meaning that any time a ...

23 22 Manually Configuring your Router 23 22 To configure the Router with the settings that your ISP gave you, click “Connection Type” (1) on the left side of the screen. Select the connection type you use. If your ISP gave you DNS settings, clicking “DNS” (2) allows you to enter DNS address entries...

23 Manually Configuring your Router 23 se ct io n 2 1 3 4 5 6 7 8 9 10 Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking “Next”. Setting your ISP Connection Type to PPPoE or PPPoA PPPoE (Point-to-Point Protocol over Ethernet) is the...

25 24 Manually Configuring your Router 25 24 1. User Name - Enter the user name. (Assigned by your ISP). 2. Password - Enter your password. (Assigned by your ISP). 3. Retype Password - Confirm the password. (Assigned by your ISP). 4. IP Assigned by ISP – Leave “Yes” if your ISP automatically assigns...

25 Manually Configuring your Router 25 se ct io n 2 1 3 4 5 6 7 8 9 10 Setting your Connection Type to Dynamic IP (1483 Bridged) This connection method bridges your network and ISP’s network together. The Router will obtain IP address automatically from your ISP’s DHCP server. 1. IP Assigned by ISP ...

27 26 Manually Configuring your Router 27 26 2. Subnet Mask - Enter a subnet mask assigned by your ISP. 3. Default Route - Enter a default gateway IP address. If the Router cannot find the destination address within its local network, it will forward the packets to the default gateway assigned by yo...

29 28 Manually Configuring your Router 29 28 Setting up the Router’s Dynamic DNS Update Client You must register with DynDNS.org’s free update service before using this feature. Once you have your registration, follow the directions below. 1. Enter your DynDNS.org user name in the “Account / E-mail”...

29 Manually Configuring your Router 29 se ct io n 2 1 3 4 5 6 7 8 9 10 Channel and SSID 1. Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is “belkin54g”. You can change this to anyth...

31 30 Manually Configuring your Router 31 30 3. Using the Wireless Mode Switch Your Router can operate in three different wireless modes: “Mixed (11b+11g)”, “11g Only”, and “11b Only”. The different modes are explained below. “Mixed (11b+11g)” Mode —In this mode, the Router is compatible with 802.11...

31 Manually Configuring your Router 31 se ct io n 2 1 3 4 5 6 7 8 9 10 Encryption/Security Securing your Wi-Fi Network Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home off...

33 32 Manually Configuring your Router 33 32 128-Bit WEP As a result of 64-bit WEP’s potential security weaknesses, a more secure method of 128-bit encryption was developed. 128-bit encryption includes a key length of 104 bits plus 24 additional bits of system-generated data (128 bits total). Some h...

33 Manually Configuring your Router 33 se ct io n 2 1 3 4 5 6 7 8 9 10 WPA-PSK (no server) This method uses what is known as a Pre-Shared key as the Network key. A Network key is basically a password that is between eight and 63 characters long. It can be a combination of letters, numbers, or charac...

35 34 Manually Configuring your Router 35 34 Sharing the Same Network Keys Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WPA and make sure your wireless networking devices are sharing the same Network key. W ir ele s s Router Ne...

35 Manually Configuring your Router 35 se ct io n 2 1 3 4 5 6 7 8 9 10 Note to Mac users: Original Apple AirPort® products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your product to see which version you are using. If you cannot co...

37 36 Manually Configuring your Router 37 36 3. Click “Apply Changes” to finish. Encryption in the Router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are configuring the Wireless Router or access point fr...

39 38 Manually Configuring your Router 39 38 5. Enter the waiting time after authentication failed in the “Quiet Period” filed. 6. Enter the IP address and port number of the radius server into the “Server-IP” and “Server-Port” fields. 7. Enter the radius key into the “Secret Key” field. 8. Click “A...

39 Manually Configuring your Router 39 se ct io n 2 1 3 4 5 6 7 8 9 10 Connecting your Computer to a Wireless Network that Requires a 64-Bit or 128-Bit WEP Key 1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and conf...

43 42 Manually Configuring your Router 43 42 Setting Up WPA for a Non-Belkin Wireless Desktop and Wireless Notebook Cards For non-Belkin WPA Wireless Desktop and Wireless Notebook Cards that are not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for Wirele...

43 Manually Configuring your Router 43 se ct io n 2 1 3 4 5 6 7 8 9 10 Setting Up Windows XP Wireless Network Utility to Use WPA-PSK In order to use WPA-PSK, ensure you are using Windows Wireless Network Utility by doing the following: 1. Under Windows XP, click “Start > Control Panel > Networ...

45 44 Manually Configuring your Router 45 44 6. Select “TKIP” or “AES” under “Data Encryption”. This setting will have to be identical to the Router that you set up. 7. Type in your encryption key in the “Network Key” box. Important: Enter your Pre-Shared key. This can be from eight to 63 characters...

45 Manually Configuring your Router 45 se ct io n 2 1 3 4 5 6 7 8 9 10 Adding Another Network Segment Wirelessly Connecting a network switch or hub to the Access Point’s RJ45 jack will allow a number of computers connected to the switch access to the rest of the network. Main Router Secondary AP W i...

47 46 Manually Configuring your Router 47 46 Setting up a Bridge Between your Router and a Secondary Access Point Bridging your Belkin Router to a secondary Access Point requires that you access the Router’s Advanced Setup Utility and enter the MAC address of the Access Point in the appropriate area...

47 Manually Configuring your Router 47 se ct io n 2 1 3 4 5 6 7 8 9 10 7. Check the box that says “Enable ONLY specific Access Points to connect” (1). 8. In the field named “AP1” (3), type in the MAC address of your secondary Access Point. When you have typed in the address, click “Apply Changes”. 9...

49 48 Manually Configuring your Router 49 48 Firewall Your Router is equipped with a firewall that will protect your network from awide array of common hacker attacks including:• IP Spoofing• Land Attack• Ping of Death (PoD)• Denial of Service (DoS)• IP with zero length• Smurf Attack• TCP Null Scan•...

49 Manually Configuring your Router 49 se ct io n 2 1 3 4 5 6 7 8 9 10 Virtual Servers Virtual servers allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications, through your Router to your internal network. Since your inter...

51 50 Manually Configuring your Router 51 50 Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. Access Control Acces...

53 52 Manually Configuring your Router 53 52 URL Blocking To configure the URL blocking feature, specify the websites (www.somesite.com) and or keywords you want to filter on your network. Click “Apply Changes” to activate the change. To complete this configuration, you will need to create or modify...

55 54 Manually Configuring your Router 55 54 Setting MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denie...

57 56 Manually Configuring your Router 57 56 To put a computer in the DMZ, enter the last digits of its IP address in the IP field and select “Enable”. Click “Apply Changes” for the change to take effect. If you are using multiple static WAN IP addresses, it is possible to select which WAN IP addres...

57 Manually Configuring your Router 57 se ct io n 2 1 3 4 5 6 7 8 9 10 Utilities The “Utilities” screen lets you manage different parameters of the Router andperform certain administrative functions. Restart Router Sometimes it may be necessary to restart or reboot the Router if it begins working im...

59 58 Manually Configuring your Router 59 58 Restore Factory Defaults Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults. 1. Click the “Restore Defaults” button. 2...

59 Manually Configuring your Router 59 se ct io n 2 1 3 4 5 6 7 8 9 10 1. Click “Save”. A window called “File Download” will open. Click “Save”. 2. A window will open that allows you to select the location in which to save the configuration file. Select a location. There are no restrictions on the f...

61 60 Manually Configuring your Router 61 60 Restore Previous Settings This option will allow you to restore a previously saved configuration. 1. Click “Browse”. A window will open that allows you to select the location of the configuration file. Locate the configuration file “config.bin” and double...

61 Manually Configuring your Router 61 se ct io n 2 1 3 4 5 6 7 8 9 10 Checking for a New Version of Firmware The “Check Firmware” (1) button allows you to instantly check for a new version of firmware. When you click the button, a new browser window will appear informing you that either no new firm...

63 62 Manually Configuring your Router 63 62 Updating the Router’s Firmware 1. In the “Firmware Update” page, click “Browse” (2). A window will open that allows you to select the location of the firmware update file. 2. Browse to the firmware file you downloaded. Select the file by double-clicking o...

63 Manually Configuring your Router 63 se ct io n 2 1 3 4 5 6 7 8 9 10 4. You will be asked if you are sure you want to continue. Click “OK”. 5. You will see one more message. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router a...

65 64 Manually Configuring your Router 65 64 Changing the Login Time-Out Setting The login time-out option allows you to set the period of time that you can be logged into the Router’s advanced setup interface. The timer starts when there has been no activity. For example, you have made some changes...

65 Manually Configuring your Router 65 se ct io n 2 1 3 4 5 6 7 8 9 10 Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD . Remote management allows you to make changes to your Router’s settings from anywhere on...

67 66 Manually Configuring your Router 67 66 Enabling/Disabling NAT (Network Address Translation) Note : This advanced feature should be employed by advanced users only. Before enabling this function, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD . Network Address Translation (NAT) is the method...

67 Manually Configuring your Router 67 se ct io n 2 1 3 4 5 6 7 8 9 10 Enabling/Disabling Auto Firmware Update This innovation provides the Router with the built-in capability to automatically check for a new version of firmware and alert you that the new firmware is available. When you log into the...

69 68 Setting Up your Computers 69 68 In order for your computer to properly communicate with your Router, you will need to change your computer’s “TCP/IP / Ethernet” settings to “Obtain an IP address automatically / Using DHCP”. This is normally the default setting in most home computers.You can se...

73 72 Setting Up your Computers 73 72 Manually Configuring Network Adapters in Mac OS up to 9.x In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP. 1. Pull down the Apple menu. Select “Control Panels” and select “T...

75 74 Setting Up your Computers 75 74 Manually Configuring Network Adapters in Mac OS X 1. Click on the “System Preferences” icon. 2. Select “Network” (1) from the “System Preferences” menu. 3. Select “Built-in Ether net” (2) next to “Show” in the Network menu. 4. Select the “TCP/IP” tab (3). Next t...

77 76 Setting Up your Computers 77 76 Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the advanced web-based user interface, then change your browser’s settings to the recommende...

79 78 Troubleshooting 79 78 Problem: The ADSL LED is not on. Solution:1. C h e c k t h e c o n n e c ti o n b e t we e n t h e R o u te r a n d A D S L l i n e. M a ke s u r e t h e c a b l e f r o m t h e A D S L l i n e i s c o n n e c te d to t h e p o r t o n t h e R o u te r l a b e l e d “ D S...

81 80 Troubleshooting 81 80 3. T h e exa c t w i n d ow t h a t o p e n s w i l l va r y d e p e n d i n g o n t h e m o d e l of w i r e l e s s c a r d yo u h ave ; h oweve r, a ny of t h e u ti l i ti e s s h o u l d h ave a l i s t of “Ava i l a b l e N e t wo r ks”—t h o s e w i r e l e s s n e...

81 Troubleshooting 81 se ct io n 2 1 3 4 5 6 7 8 9 10 Problem: I can’t connect to the Inter net wirelessly, and my network name is not listed. Solution: If the correct network name is not listed under “Available Networks” in the wireless utility, please attempt the following troubleshooting steps: 1...

91 Troubleshooting 91 se ct io n 2 1 3 4 5 6 7 8 9 10 Wireless Comparison Chart W ir el es s Te ch n o lo g y 80 2. 11 b 80 2. 11 g 80 2. 11 a B el ki n P re -N Speed 11Mbps 54Mbps 54Mbps 108Mbps F re q u en cy Common household devices such as cordless phones and microwave ovens may interfere with t...

93 92 Technical Support Information 93 92 Belkin Technical Support Fo r l a te s t s of t wa r e u p d a te s o r i f yo u h ave a ny f u r t h e r q u e s ti o n s r e g a r d i n g i n s t a l l a ti o n of t h i s p r o d u c t , p l e a s e v i s i t www.belkin.com/networking

93 Appendixes 93 se ct io n 2 1 3 4 5 6 7 8 9 10 Appendix A: Glossary IP Address The “IP address” is the internal IP address of the Router. To access the advanced setup interface, type this IP address into the address bar of your browser. This address can be changed if needed. To change the IP addre...

95 Appendixes 95 se ct io n 2 1 3 4 5 6 7 8 9 10 ESSID Broadcast Many wireless network adapters currently on the market possess a feature known as site survey. It scans the air for any available network and allows each computer to automatically select a network from the survey. This occurs if the co...

97 Appendixes 97 se ct io n 2 1 3 4 5 6 7 8 9 10 can leave the public IP to “0.0.0.0”. If you are using multiple public (WAN) IP addresses, it is possible to select which public (WAN) IP address the DMZ host will be directed to. Type in the public (WAN) IP address you wish the DMZ host to direct to,...

99 98 Appendixes 99 98 UPnP UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’s firewall to be configured in a specific way to operate properly...

99 Appendixes 99 se ct io n 2 1 3 4 5 6 7 8 9 10 • In multistory homes, place the wireless router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the wireless router (or access point) on an upper floor. • Try not to place the wireless router...

101 100 Appendixes 101 100 4. Choose the “Quietest” Channel for your Wireless Network In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours. Use the Site Survey capabilities found in...

103 102 Appendixes 103 102 Appendix C: Internet Connection Setting Table The following table provides references to select and configure Internet connection in setting up your ADSL connection. Many ISPs use different settings depending on the region and equipment they use. You may try the setting fo...

105 104 Information 105 104 FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7633-4 to which this declaration relates, complies wit...

105 Information 105 se ct io n 2 1 3 4 5 6 7 8 9 10 • Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s a...

107 106 Information 107 106 Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is re...

© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. P74725uk-A ADSL Modem with Wireless G Router De...