Page 2 - TABLE OF CONTENTS
TABLE OF CONTENTS Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 3 - Where to Place Your Router; GETTING STARTED
1 What’s in the Box AC1750 DB Wireless AC+ Gigabit Router Ethernet cable (attached to router) Power supply (attached to router) Network information card (attached to router) Quick Setup Guide Initial Setup Where to Place Your Router For the best results, place the Router next to your modem in an ope...
Page 4 - Connect Your AC1750 DB Router
2 GETTING STARTED How to Set It Up Connect Your AC1750 DB Router Turn off your modem by disconnecting its power supply. Some modems have a batter y backup; this will need to be disconnected at this time as well. Connect your Router to your modem using the cable (already attached). Power up your mode...
Page 5 - Connect to Your Router
3 GETTING STARTED Connect to Your Router Retrieve the network ID card from the foot of your new Belkin Router. Can’t find the card? The default network name and password are also printed on the foot of the Router. Use your computer, tablet, or smartphone to connect to the wireless network shown on t...
Page 7 - Once your Router is online, it will determine if there is a
5 GETTING STARTED Once your Router is online, it will determine if there is a firmware update available and offer to install it. Please allow up to 5 minutes for the firmware to update. If there are no updates available, then setup will proceed.
Page 9 - Please take this opportunity to register your Router. This will
7 GETTING STARTED Please take this opportunity to register your Router. This will help technical support if there is a problem with your Router. Simply complete each of the required fields and click “Complete Registration.” If you don’t want to register right now, click “Register Later” to proceed.
Page 11 - Using the WPS Button
9 GETTING STARTED Using the WPS Button 1 . Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical “ WPS,” “PBC,” or ...
Page 12 - Manually Set Up Your Internet Connection
10 GETTING STARTED Manually Set Up Your Internet Connection Use a browser to visit http://router/. You can also tr y visiting http://192.168.2.1/. The Router’s Welcome page should appear. Click the “Set it up manually” link. Please select the type of connection your ISP provides. Refer to page 16 fo...
Page 13 - If you decide to change these settings, then enter the
11 GETTING STARTED If you decide to change these settings, then enter the new values and click “Save and Continue.” (Note: The password must be at least 8 characters long.) If you changed your network name and password, make note of it on the ser vice card located on the foot of the Router. You will...
Page 17 - Manually Configuring Your Router’s; To set up your ISP connection manually, select “ISP Connection
15 GETTING STARTED Manually Configuring Your Router’s Internet from the Dashboard To set up your ISP connection manually, select “ISP Connection Type” from the list under the header “ WAN Settings.”
Page 18 - Dynamic Connection; Some DSL customers require a PPPoE connection. Let’s tr y dynamic
16 GETTING STARTED Dynamic Connection Cable and fiber customers generally require a dynamic connection. Some DSL customers require a PPPoE connection. Let’s tr y dynamic first. Select “Dynamic” from the menu that appears and press “Next.”
Page 19 - A host name is generally not required.
17 GETTING STARTED A host name is generally not required. Hit “Save.” The Router will restart. If after a few minutes your Internet Status says “Online,” you’re done! You can surf the Internet. If these steps do not work, tr y restarting your modem and repeating the process. If not, we’ll tr y a PPP...
Page 20 - PPPoE Connection; Some DSL customers require a PPPoE connection.
18 GETTING STARTED PPPoE Connection Some DSL customers require a PPPoE connection. Select PPPoE this time and press “Next.”
Page 22 - Android; Settings; Connect Your Wireless Devices; iOS
20 GETTING STARTED Android ™ (phones and tablets) 1. Open the Settings app and select Wireless and Network . 2. From there, select Wi-Fi to see the list of available networks. 3. Select your wireless network from the list. If asked to do so, enter your network password. Connect Your Wireless Devices...
Page 23 - Windows
21 GETTING STARTED Windows ® 7 Your computer provides a menu of available wireless networks at the right end of the task bar. 1. Lef t-click on the icon that looks like signal strength bars. 2. Select your wireless network from the list. If asked, enter your network password (network key). Windows V...
Page 25 - ADDITIONAL CAPABILITIES; Adding a Drive
23 ADDITIONAL CAPABILITIES Adding a Drive You can share a USB hard drive or flash drive to your network via your Router’s USB port. Once connected, you can share files and music with other computers and devices within your network. Plug your USB hard drive into the USB port on the back of your Route...
Page 26 - Adding Other USB Devices; Other USB devices may also be shared via your Router. Plug your
24 ADDITIONAL CAPABILITIES Adding Other USB Devices Other USB devices may also be shared via your Router. Plug your device into the USB port located on the back of your Router. Computers running the Belkin USB Print and Storage Manager will be able to make use of the shared device.
Page 27 - USB Print and Storage Center; The USB Print and Storage Center helps to manage and
25 ADDITIONAL CAPABILITIES Optional Software USB Print and Storage Center The USB Print and Storage Center helps to manage and monitor the use of your USB printers, scanners, hard drives, and other devices that are connected to your Router’s USB port and shared across your network.
Page 28 - Guest Access
26 ADDITIONAL CAPABILITIES Guest Access You can allow guests to use your Internet connection without joining your personal network. The network name and password for the guest network is located on the network information card found under the foot of your Router. A person using your guest network wi...
Page 29 - DLNA Server: Enables or disables your media ser ver
27 ADDITIONAL CAPABILITIES Media Server by myTwonky Media Ser ver by myTwonky lets your Router stream music, movies, and photos to different DLNA /UPnP devices on your network. In order to use Media Ser ver by myTwonky, you will need to insert a USB storage device with media content into a free USB ...
Page 31 - Intellistream prioritizes video and gaming traffic for; There are two ways to enable Intellistream:; Click “Run a Speed Test ” and the test will begin.
29 ADDITIONAL CAPABILITIES Intellistream QoS Intellistream prioritizes video and gaming traffic for a better online entertainment experience. There are two ways to enable Intellistream: Run a Speed Test: In order for Intellistream to provide you the best media experience, your Router needs to know w...
Page 32 - If your Internet speed is greater than 70Mbps when downloading,; Refresh – This will retest your Internet speed.; When you click “Save,” your Router will save your changes.
30 ADDITIONAL CAPABILITIES If your Internet speed is greater than 70Mbps when downloading, Intellistream QoS will only improve your uploading experience. Refresh – This will retest your Internet speed. When you click “Save,” your Router will save your changes.
Page 33 - Manual set – This will let you set your approximate Internet speeds.; If you do not know your Internet speeds, contact your ISP.
31 ADDITIONAL CAPABILITIES When you click “Save,” your Router will save your changes. Intellistream is now enabled. Manual set – This will let you set your approximate Internet speeds. If you do not know your Internet speeds, contact your ISP.
Page 36 - GETTING TO KNOW YOUR ROUTER; Off: No USB device is; Back Panel
34 GETTING TO KNOW YOUR ROUTER A) Modem (WAN) Connector Connect your modem to this port using an Ethernet cable. B) Wired (LAN) Connectors Connect computers and other wired network devices to these ports using Ethernet cables. C) USB Port USB printers, disks, and other USB devices plugged into this ...
Page 38 - Setup
36 TECHNICAL DETAILS System Requirements Router Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer RJ45 Ethernet networking cable Internet b...
Page 40 - . Locate and download the firmware file from the Belkin
38 USING YOUR ROUTER 38 Updating the Router’s Firmware via the Web Interface The following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself. Setup steps: 1 . Locate and downl...
Page 41 - USING YOUR ROUTER; . Click on “Firmware Update” toward the bottom.; screen to search for the file you saved previously.; Note: The firmware version in the image above is; depicted as an example. Your file name will var y
39 USING YOUR ROUTER 39 6 . Click on “Firmware Update” toward the bottom. 7 . Click the “Choose File” button toward the middle of the screen to search for the file you saved previously. Note: The firmware version in the image above is depicted as an example. Your file name will var y depending on yo...
Page 42 - 0 . A prompt asking, “Are you sure you want to continue; respond during the upgrade and warning you not to remove; . Select the firmware file by left-clicking on it and then click; the “Open” button in the lower-right corner of the window.
40 USING YOUR ROUTER 40 9 . Click the “Update” button. 10 . A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click “OK”. 11 . A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the ...
Page 43 - Reset Button – Red; Restoring Your Router to Factory Defaults
41 USING YOUR ROUTER Resetting the Router Reset Button – Red The “Reset ” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factor y default setting...
Page 44 - Symptoms; You need to restore the factor y defaults using the web interface.; Setup steps; the “Utilities” heading.
42 USING YOUR ROUTER Restoring the Router to Default Settings Using the Web Interface Symptoms You need to restore the factor y defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings. Setup steps 1 . Ope...
Page 45 - . Click on the “Restore Defaults” button.; the restore is complete, the Router will reboot.
43 USING YOUR ROUTER 4 . Click on the “Restore Defaults” button. 5. A warning box will open that says, “ Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK”. 6 . The Router will begin the restoring process. Once the restore is complete, the Router will reboot. Note...
Page 46 - Troubleshooting
44 TROUBLESHOOTING, SUPPORT, AND WARRANTY Troubleshooting I can’t connect to the Internet wirelessly . If the light on the front of the Router is solid blue, then your Router is connected to the Internet. You may not be connected to the Router’s wireless network. Please refer to “Connect Your Wirele...
Page 47 - I’ve installed this new Router and some of my network clients
45 TROUBLESHOOTING, SUPPORT, AND WARRANTY Limiting the wireless transmit rate — Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Pane...
Page 51 - Technical Support; US
49 TROUBLESHOOTING, SUPPORT, AND WARRANTY Technical Support US http://www.belkin.com/support UK http://www.belkin.com/uk /support Australia http://www.belkin.com/au/support New Zealand http://www.belkin.com/au/support Singapore 1800 622 1130 Europe http://www.belkin.com/uk /support
Page 52 - -Year Product Warranty; What this warranty covers .
50 TROUBLESHOOTING, SUPPORT, AND WARRANTY Belkin International, Inc ., Limited 2-Year Product Warranty What this warranty covers . Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, ...
Page 53 - . Your Belkin Customer Ser vice Representative will then
51 TROUBLESHOOTING, SUPPORT, AND WARRANTY How to get service . To get ser vice for your Belkin product you must take the following steps: 1 . Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa Vista, CA 90094, Attn: Customer Ser vice, or call (800)-223-5546, within 15 days of th...
Page 54 - How state law relates to the warranty .
52 TROUBLESHOOTING, SUPPORT, AND WARRANTY How state law relates to the warranty . THIS WARRANT Y CONTAINS THE SOLE WARRANT Y OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANT Y OR CONDITION OF QUALIT Y, MERCHANTABILIT Y OR FITNE...
Page 56 - REGULATORY INFORMATION; Radiation Exposure Statement; Modifications; IC Radiation Exposure Statement
54 REGULATORY INFORMATION IMPORTANT NOTE: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FC...
Page 57 - FCC Radiation Exposure Statement:
55 REGULATORY INFORMATION IMPORTANT NOTICE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 23cm between the radiator and your body. This...
