B&C Speakers DE85 - Manual
B&C Speakers DE85 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .
Specifications
1
Throat Diameter
50 mm (2 in)
Nominal Impedance
8
Ω
Minimum Impedance
8
Ω
Power Handling
(1000 –20000 Hz)
Nominal
2
80 W
Continuous Program
3
160 W
Sensitivity (1W/1m)
4
108 dB
Frequency Range
0.5 – 18 kHz
Recommended Crossover
5
1000 Hz
Voice Coil Diameter
75 mm (3 in)
Winding Material
Aluminium
Inductance
0.14 mH
Diaphragm Material
Titanium
Flux Density
1.8 T
Also available in 16
Ω
, data upon request
Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter
170 mm (6.7 in)
Depth
67 mm (2.6 in)
Net Weight (1 unit)
4.5 kg (9.9 lb)
Shipping Weight (2 units)
9.6 kg (21.2 lb)
Shipping Box (2 units)
210x210x190 mm
(8.3x8.3x7.5 in)
1
Driver mounted on B&C ME 75 horn.
2
2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5
12 dB/oct. or higher slope high-pass filter.
DE 85
|
Hf Compression drivers
Speakers HPL Coaxials
HF Compression drivers
Horns
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
