B&C Speakers DE1050 - Manual
B&C Speakers DE1050 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
DE1050
HF Drivers
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
280 W continuous program power capacity
2” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet assembly with shorting copper cap
Specifications
Throat Diameter (1)
50 mm (2 in)
Nominal Impedance (2)
8 ohm
Minimum Impedance
8.1 ohm
Nominal Power Handling (3)
140 W
Continuous Power Handling (4)
280 W
Sensitivity (1W/1m) (5)
109 dB
Frequency Range
0.5 -20 kHz
Recommended Crossover (6)
0.8 kHz
Voice Coil Diameter
100 mm (4 in)
Winding Material
Aluminium
Inductance
0.18 mH
Diaphragm Material
Titanium
Flux Density
1.95 T
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter
154 mm (6.1 in)
Depth
85 mm (3.3 in)
Net Weight
3.6 kg (7.9 lb)
Shipping Weight
3.9 kg (8.6 lb)
Shipping Box
195x195x100 mm
(7.7x7.7x3.9 in)
1
Driver mounted on B&C ME60 horn
2
Also available in 16 ohms, data upon request
3
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
4
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6
12 dB/oct. or higher slope high-pass filter.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
