B&C Speakers DE12TC - Manual
B&C Speakers DE12TC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
DE12TC
HF Drivers
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
60 W continuous program power capacity
1” horn throat diameter
36 mm (1.4 in) aluminium voice coil
Titanium diaphragm
1500 – 18000 Hz response
105 dB sensitivity
Specifications
Throat Diameter (1)
25 mm (1 in)
Nominal Impedance (2)
8 ohm
Minimum Impedance
8.1 ohm
Nominal Power Handling (3)
30 W
Continuous Power Handling (4)
60 W
Sensitivity (1W/1m) (5)
105 dB
Frequency Range
1.5 -18 kHz
Recommended Crossover (6)
2.2 kHz
Voice Coil Diameter
36 mm (1.4 in)
Winding Material
Aluminium
Inductance
0.14 mH
Diaphragm Material
Titanium
Flux Density
1.45 T
Mounting and Shipping Info
Two M5 holes 180° on 76 mm (3
in) diameter
Overall Diameter
90 mm (3.5 in)
Depth
49 mm (2 in)
Net Weight (1 unit)
1 kg (2.2 lb)
Shipping Weight (8 units)
8.9 kg (20 lb)
Shipping Box (8 units)
220x220x150 mm
(8.7x8.7x5.9 in)
1
Driver mounted on B&C ME45 horn
2
Also available in 16 ohms, data upon request
3
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
4
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6
12 dB/oct. or higher slope high-pass filter.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
