B&C Speakers 12PS100 - Manual
B&C Speakers 12PS100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
12PS100
Subwoofer
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
1400 W continuous program power capacity
100 mm (4 in) copper voice coil
45 – 1000 Hz response
93 dB sensitivity
Double silicone spider with optimized compliance
Specification
Nominal Diameter
320 (12) mm (in)
Nominal Impedance (1)
8 Ohm
Minimum Impedence
6.7 Ohm
Nominal Power Handling (2)
700 W
Continuous Power Handling (3)
1400 W
Sensitivity (1W/1m) (4)
93 dB
Frequency Range
45 - 1000 Hz
Voice Coil Diameter
100 (4) mm (in)
Winding Material
Copper
Former Material
Glass Fibre
Winding Depth
21 (0.83) mm (in)
Magnetic Gap Depth
10.5 (0.4) mm (in)
Flux Density
1.05 T
Thiele & Small Parameters
Fs
44 Hz
Re
5.3 Ohm
Qes
0.29
Qms
3.9
Qts
0.27
Vas
47 (1.6) dm3 (ft3)
Sd
531 (82.3) cm2 (in2)
Eta Zero
1.3 %
Xmax
+/- 8 mm
Xvar
+/- 8 mm
Mms
106 g
Bl
22.5 Txm
Le
2 mH
Mounting and Shipping Info
Overall Diameter
319 mm (12.5 in)
Bolt Circle Diameter
299 mm (11.8 in)
Baffle Cutout Diameter
281 mm (11.1 in)
Depth
118 mm (4.6 in)
Flange and Gasket Thickness
13 mm (0.5 in)
Net Weight
8.8 kg (19.4 lb)
Shipping Weight
9.4 kg (20.7 lb)
Shipping Box
340x340x170 mm
(13.4x13.4x6.7 in)
1
For different impedances, please ask.
2
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms or 2.0V for 4 ohms
Nominal Impedance
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
