B&C Speakers 10MD26 - Manual
B&C Speakers 10MD26 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
10MD26
Mid-Bass
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
700 W continuous program power capacity
76 mm (3 in) aluminium voice coil
80 – 4000 Hz response
100 dB sensitivity
Specification
Nominal Diameter
250 (10) mm (in)
Nominal Impedance (1)
8 Ohm
Minimum Impedence
7.2 Ohm
Nominal Power Handling (2)
350 W
Continuous Power Handling (3)
700 W
Sensitivity (1W/1m) (4)
100 dB
Frequency Range
80 - 4000 Hz
Voice Coil Diameter
76 (3) mm (in)
Winding Material
Aluminium
Former Material
Glass Fibre
Winding Depth
11(7/16) mm (in)
Magnetic Gap Depth
8 (5/16) mm (in)
Flux Density
1.45 T
Thiele & Small Parameters
Fs
76 Hz
Re
5.8 Ohm
Qes
0.22
Qms
4.8
Qts
0.21
Vas
20 (0.71) dm3 (ft3)
Sd
320 (49.1) cm2 (in2)
Eta Zero
3.9 %
Xmax
+/- 1.5 mm
Xvar
+/- 4.5 mm
Mms
31 g
Bl
19.6 Txm
Le
1.2 mH
Mounting and Shipping Info
Overall Diameter
262 mm (10.3 in)
Bolt Circle Diameter
245 mm (9.6 in)
Baffle Cutout Diameter
230 mm (8.8 in)
Depth
124 mm (4.9 in)
Flange and Gasket Thickness
14 mm (0.55 in)
Net Weight
7.3 kg (16.1 lb)
Shipping Weight
7.9 kg (7.4 lb)
Shipping Box
320x320x160 mm
(12x12x6.3 in)
1
For different impedances, please ask.
2
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms or 2.0V for 4 ohms
Nominal Impedance
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
