B&B Electronics 232PCC2 - Manual

Table of Contents:

• Page 2 – TABLE OF CONTENTS
• Page 3 – Chapter 1: Introduction; B&B Electronics 232PCC2 provides two independent RS-232; Specifications; PCMCIA; Physical Dimensions:; Adapter to 2 standard male D-9
• Page 4 – Client Driver; File type: DOS device driver
• Page 5 – AFTER; drive
• Page 6 – Command Line Options; must
• Page 7 – Example 1
• Page 10 – Common Problems; The 232PCC2 when installed shows up as a DSP-100.; Generic Client Drivers Generic Client Drivers; Many Card and Socket Services packages include a generic; Available Resources; One function of the Card and Socket Services software is to; Multiple Configuration Attempts; Some Card and Socket Services have a setting that aborts the; Older Versions of Card and Socket Services; Some versions of Card and Socket Services dated before 1993
• Page 11 – Chapter 3: 232PCC2 Enabler for DOS; For systems that are not operating PCMCIA Card and Socket; In order to use the 232PCC2 Enabler for DOS, the system; IMPORTANT; The Enabler requires a region of high DOS memory when
• Page 12 – one
• Page 14 – The 232PCC2 is identified as a DSP-100 when installed.; Memory Range Exclusion
• Page 15 – Furthermore, some systems use the high memory area for BIOS; Socket Numbers; The Enabler requires the 232PCC2's socket number to be; Card and Socket Services Software
• Page 18 – Viewing the 232PCC2 Resource Settings
• Page 19 – Changing Resource Settings with Device Manager
• Page 22 – Chapter 5: Hardware Information; Channel
• Page 23 – Chapter 6: External Connections; The 232PCC2is fitted with a 25-pin 0.8mm shielded connector.; P o r t A; Figure 1. 232PCC2 Adapter Cable to Standard RS-232 Connectors.
• Page 24 – Appendix A: Declaration of Conformity