Basement Watchdog BW-WIFI - User Manual

What you need:

Small flathead screw driver
Wi-Fi network name
Wi-Fi network password
Wi-Fi capable device (computer,
tablet, or smartphone)

Getting set up and connected is simple

1. Determine what Basement Watchdog device you
have and how you are attaching to it
2. Attach your WiFi Module to your Basement
Watchdog system
3. Mount your WiFi Module
4. Connect to your Wi-Fi network
5. Register online

Attach the WiFi module to your Basement
Watchdog system and power source as
shown on the installation diagram(s).

(note: please choose the connection
method that matches the system you have)

a. ‘RED’ and ‘GREEN’ lights should be
alternating

Mount your module using the
included Velcro or mounting screws

Register your module
a. You will receive an email from
GlentronicsConnect.com at the
provided email address
b. Click on the link and complete
the registration

Note: We recommend you test the setup by
disconnecting power to the pump system
connected to the WiFi module.
You should receive an email / text

within a few minutes

Welcome

Before you begin
View the installation video at

www.BasementWatchdog.com/videos

WiFi Module

Quick Start

Guide

Step 1

Step 2

Connect to your wifi network

a. Open the network settings
on your device and
connect to GLENTRON

Step 3

Step 4

b. Close the network settings
and open up the browser
• In the URL field,
type 192.168.1.1

c. Fill out the information
needed on the module
setup page
• Click ‘save’

d. Click on Available Networks and select your network from the dropdown menu
• Enter your passphrase and click OK

e. The ‘RED’ and ‘GREEN’ lights will stop alternating if the connection is successful.
If lights do not stop alternating repeat Step 3