Axis P5534 - Manual

AXIS P5534 PTZ Dome Network Camera Hardware overview • Connecting to AXIS Internet Dynamic DNS Service. See page 40 . To connect, press and hold the button for about 3 seconds. • Resetting the product to factory default settings. See page 46 . Restart button - Press to restart the product. Multi-con...

AXIS P5534 PTZ Dome Network Camera Accessing the product Accessing the product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari...

AXIS P5534 PTZ Dome Network Camera Accessing the product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must con fi gure your network router to allow incoming data traf fi c to the product. To do this, ...

AXIS P5534 PTZ Dome Network Camera Accessing the product Controls on the Live View page Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. The Stream Pro fi le drop-down list allows you to select a customized or pre-programmed stream pro fi le. Stre...

AXIS P5534 PTZ Dome Network Camera Accessing the product AMC Audio controls AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when audio is enabled. Speaker button — Click to turn the speakers on or off. Microphone button – Click to ...

AXIS P5534 PTZ Dome Network Camera Media streams Media streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video stre...

AXIS P5534 PTZ Dome Network Camera Media streams The AMC Control Panel can be used to con fi gure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on fi rst use, after which it can be con fi gured...

AXIS P5534 PTZ Dome Network Camera Media streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later.• QuickTime adds latency to the video stream.• It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee ...

AXIS P5534 PTZ Dome Network Camera Setting up the product Setting up the product The Axis product can be con fi gured by users with administrator or operator rights. Click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators...

AXIS P5534 PTZ Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can con fi gure the following: • Video stream settings. See page 16 . • Stream pro fi les. See page 17 . • Camera settings. See page 17 . • Overlay ima...

AXIS P5534 PTZ Dome Network Camera Video and Audio • The Live View page in Internet Explorer in Windows. Right-click in the image and select Pixel counter . Use the mouse to move and resize the rectangle. Image You can modify the image resolution and compression, and rotate the image from the Image ...

AXIS P5534 PTZ Dome Network Camera Video and Audio Image Appearance Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness can be adjusted in the range 0–100, where a higher value produc...

AXIS P5534 PTZ Dome Network Camera Video and Audio Image freeze on PTZ - Select All movements to freeze the image while the camera is moving during a pan, tilt or zoom operation. Once the camera reaches its new position, the view from that position is shown. Presets freezes the image only when the c...

AXIS P5534 PTZ Dome Network Camera Video and Audio Control viewer toolbar ). In Push-To-Talk mode, click and hold the button to speak and release it when done. In Toggle mode, click once to switch between speaking and listening. The Talk/Listen mode is con fi gured from the Audio tab in the AMC cont...

AXIS P5534 PTZ Dome Network Camera Video and Audio Audio Output An external speaker can be connected to the product’s Audio-out connector. The output can be used with high impedance headphones or connected to another ampli fi er with speakers. Con fi gure the audio output settings under Video & ...

AXIS P5534 PTZ Dome Network Camera Live View Con fi g Live View Con fi g You can customize the Live View page and alter it to suit your requirements. It is possible to de fi ne the following features of the Live View page. • Stream Pro fi le. See page 17 . • Default Viewer for Browser. See page 22 ....

AXIS P5534 PTZ Dome Network Camera Live View Con fi g Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG) QuickTime H.264 Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or...

AXIS P5534 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a prede fi ned view that can be used to quickly steer the camera to a speci fi c location. Preset positions can be accessed in several ways: • By selecting the preset from the Preset posi...

AXIS P5534 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) To con fi gure the Gatekeeper, follow the online instructions under PTZ > Gatekeeper . Guard Tour A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for con fi gurable...

AXIS P5534 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any d...

AXIS P5534 PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement occurs (or stops) in the view. Up to 10 Include and Exclude windows can be con fi gured: • Include windows — target speci fi c areas within the whole video image • ...

AXIS P5534 PTZ Dome Network Camera Detectors Parameter Object Size History Sensitivity Description Object size relative to window size. Object memory length. Difference in luminance between background and object. High level (100%) Only very large objects trigger motion detection. An object that appe...

AXIS P5534 PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. For information about available applications, downloads, trials and licenses, go to www.axis.com/applications To upload an application, go to Applications > ...

AXIS P5534 PTZ Dome Network Camera Events Events The Axis product can be con fi gured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that de fi nes how and when the action is triggered is called an Action Rule . Available...

AXIS P5534 PTZ Dome Network Camera Events - Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 33 . Available actions include: • Day/Night Vision Mode — set day mode (IR cut fi lter on) or night mode (IR cut fi lter off). • Output Port — activate an I/O port t...

AXIS P5534 PTZ Dome Network Camera Events 8. Select Network Share from the Storage drop-down list. To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in...

AXIS P5534 PTZ Dome Network Camera Events Recurrences Recurrences are used to trigger Action Rules repeatedly, for example every 5 minutes or every hour. To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern. 3. Click OK . To use ...

AXIS P5534 PTZ Dome Network Camera Recordings Recordings The Axis product can be con fi gured to record video continuously or according to an action rule: • To start a continuous recording, see page 35 . • To set up action rules, see page 32 . • To access recordings, see Recording List, on page 35 ....

AXIS P5534 PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be con fi gured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to al...

AXIS P5534 PTZ Dome Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by I...

AXIS P5534 PTZ Dome Network Camera System Options To change the date and time settings, select the preferred Time mode under New Server Time : • Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated a...

AXIS P5534 PTZ Dome Network Camera System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to fi nd a local AVHS Service Provider go ...

AXIS P5534 PTZ Dome Network Camera System Options Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number ca...

AXIS P5534 PTZ Dome Network Camera System Options The following traps are available: • Cold start • Warm start • Link up • Authentication failed SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required. To use SNMP v3, HTTPS must be e...

AXIS P5534 PTZ Dome Network Camera System Options If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair . To avoid fi lling the card, it is recommended to remove recordings continuously. Under Recording Settings , select Remove recordings older...

AXIS P5534 PTZ Dome Network Camera System Options Click Restore to reset most settings to the factory default values. The following settings are not affected: • the boot protocol (DHCP or static) • the static IP address • the default router • the subnet mask • the system time • the IEEE 802.1X setti...

AXIS P5534 PTZ Dome Network Camera System Options The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Con fi guration . The Access Log can be con fi gured to list all connections to the product (select Critical, Warnings & I...

AXIS P5534 PTZ Dome Network Camera Troubleshooting Troubleshooting Checking the fi rmware Firmware is software that determines the functionality of network devices. One of your fi rst actions when troubleshooting a problem should be to check the current fi rmware version. The latest version may cont...

AXIS P5534 PTZ Dome Network Camera Troubleshooting arp -s <IP address> <serial number> tempping -s 408 <IP address> In Windows , type the following from a command/DOS prompt: arp -s <IP address> <serial number>ping -l 408 -t <IP address> 2. If the product does not...

AXIS P5534 PTZ Dome Network Camera Technical Speci fi cations Function/group Item Speci fi cations Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22, EN 60950-1, KCC Clas...