Audiovox 50-0263x-018 SERIES - Manual
Audiovox 50-0263x-018 SERIES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – VCP MOUNTING BRACKET
- Page 3 – SEPARATE HOUSING TOP FROM HOUSING BOTTOM.; Route video and audio cables to passenger’s side; CAUTION: Drill through plastic; See Figure 2 .; FIGURE 1
- Page 4 – Align screws in VCP with slots in bracket and; NOTE: Do not overtighten screws.; FIGURE 4
- Page 5 – Make all necessary wiring connections to VCP. Check; CAUTION: Do not overtighten screws.; Carefully install housing top and press firmly along; FIGURE
INSTALLATION INSTRUCTIONS
FOR
50-0263x-001 SERIES 1181310
50-0263x-018 SERIES 1181315
50-0263x-019 SERIES 1181320
CHEVROLET S-10 BLAZER
VIDEO CASSETTE PLAYER HOUSING
These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
2. Powered screwdriver or drill with adapter
3. 3/8" drill bit
4. Razor knife or similar
5. Awl or similar tool
6. Audiovox VCP (AVP- 7180 or equiv.)
MATERIALS PROVIDED FOR INSTALLATION:
Jan. 21, 1999
Printed in the U.S.A
INSTALLATION INSTRUCTION # 44-0027A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 ITEM Description QTY 1 SCREW, # 8 X 1 1/2" PWH 4 2 SCREW, # 8 X 3/4" PPH 4 3 VCP MOUNTING BRACKET 1 4 HOUSING TOP 1 5 HOUSING BOTTOM 1 INSTALLATION INSTRUCTION # 44-0027A Jan. 21, 1999 Printed in the U.S.A.
3 REMOVE AND DISCARD (2) TWO SCREWS WHICH SECURE BRACKET TO HOUSING. SEPARATE HOUSING TOP FROM HOUSING BOTTOM. 1. Route video and audio cables to passenger’s side rear of vehicle. Using a razor knife, carefully cut a slit in carpet to allow cables to pass through. Make sure wiring will not rub again...
4 4. Remove and discard (4) four screws from the side of VCP. Partially install (4) four #8 x 3/4" screws (item 2 pg 2). See Figure 4. 5. Align screws in VCP with slots in bracket and slide into position. Make sure wiring does not rub against edge of bracket. See Figure 5. 6. Carefully position ...
