AudioSource LS130 - Manual
AudioSource LS130 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – To Subwoofer; CONNECTION GUIDE
- Page 3 – SW380 Powered Subwoofer; ABOUT SUBWOOFERS
- Page 4 – Safety Instructions; WARNING; Specifications; Line Level or Speaker Level with Speaker Level Pass Through; CAUTION
LS130 & LS130C
CONNECTING YOUR SPEAKERS
The spring-clamp connectors will accommodate up to 16-gauge speaker wire. Strip the insulation back about 1/4 inch. Press
the Spring-clamp in to reveal the opening of the connector, insert wire and release.
When connecting the speakers, be sure to maintain the correct polarity. Attach the wire from the
(+) Red
or positive terminal
of the speaker to the
(+) Red
or positive terminal of the corresponding component
’
s speaker output terminal. The
(-) Black
or
negative terminal of the speaker must connect the respective
(-) Black
or negative terminal of the corresponding component
’
s
speaker output terminal. This is easy to do by observing the color, stripe or ribbing that appears on the speaker wire.
Note:
The LS130C Center channel uses a Green terminal for
(+)
or positive, where the LS130 satellites utilize a
Red
terminal for
(+)
or positive. All LS130 and LS130C speakers use
Black
for the
(-)
or negative terminal.
THIS SYSTEM CONTAINS:
•
4 each LS130 Satellite Speakers
(left front, right front, left rear and right rear speakers)
•
1 each LS130C Center Channel Speaker
•
1 each SW380 Powered Subwoofer
•
1 each UL Approved Power Supply
•
4 each Wall Hangers and 16 Screws
•
Color Coded Speaker Wire
Congratulations on your purchase, and welcome to the AudioSource family of satisfied customers. Please take a
few moments to read this manual before you start to install your new speaker system. Also, be sure to retain this
document should you need to refer to it in the future.
The AudioSource System 230 Home Theater Speaker system is designed to accurately reproduce high fidelity
music, including digital source materials. Movies and stereo television broadcasts will sound more realistic, putting
you in the center of the action. The AudioSource System 230 Home Theater Speaker system is video shielded,
allowing placement on or near your television or monitor screen without disturbing the monitoring device’s performance.
With proper placement you should be able to enjoy a true theater experience.
This manual is divided into two sections. The first provides information about the LS130 satellites and LS130C
center channel speaker. The next section concerns the SW380 Powered Subwoofer.
If any parts of this system are missing or damaged,
do not return to the store of purchase.
1.800.HELP.115
Please call AudioSource directly.
System 230
Home Theater Speaker System
USER MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
+ _ + _ + _ + _ + _ + _ + _ + _ + _ Sub Out R Front L Front Center R Rear L Rear L Rear R Rear Center R Front L Front Receiver + _ SPEAKER PLACEMENT The LS 130C Center Channel speaker should be placed as close as possible to the center of the television or display device,either above or just below t...
SW380 Powered Subwoofer ABOUT SUBWOOFERS Subwoofers extend the bass response of your system beyond the limitations of most speakers. The SW 380 powered subwooferis used in conjunction with you left, center and right front speakers, as well as the left and right rear speakers of the System 230to dram...
Safety Instructions WARNING To reduce the risk of fire or electric shock, do not expose this applianceto rain or moisture. To reduce the risk of electric shock, do not removecover (or back); no user-serviceable parts inside. Refer servicing toqualified service personnel. To prevent electric shock, m...
