AudioSource AmpThree - Manual
AudioSource AmpThree – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hooking up the Wires; Line In; Bridging Switch (refer to wiring diagram); Speaker Terminals
- Page 3 – 00 watts monobridged; AMP Three Specifications; Design and specifications are subject to change without notice.; Stereo Setup
- Page 4 – Safety Instructions; Printed in Taiwan
Stereo Power Amplifier with Internal Bridging
AMP Three
Congratulations on your new purchase and welcome to the AudioSource family of satisfied customers.
We trust you will continue to enjoy the value and quality of your AudioSource AMP Three for many years to
come. To ensure the best performance from your unit, please take a few moments to read this manual. Also,
be sure to retain this document for future reference.
Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115.
Owner’s Manual
© 1999 AudioSource, Inc.
Using the Controls
Power
This front panel button will manually switch the AMP Three on or off. A multicolored LED indicates its
power status. To use the
Auto On
feature, leave this front panel switch in the
on
position.
Speaker Selector
The AMP Three has two pairs of speaker outputs. Press button
A
to activate the
A
outputs. Press button
B
to activate the
B
outputs. Both
A
and
B
outputs may be used simultaneously, provided the combined
impedance does not fall below 2 ohms.
Note: Before pressing either of the speaker selector buttons, be sure that the level controls are set at the minimum position.
Input Level Controls
These knobs adjust the incoming signal level and thereby act as volume controls. We recommend that these
be set to
max
and your signal source (receiver, CD player, preamplifier, etc.) be used to adjust the volume.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Using the Controls (cont.) Manual/Auto Power Switch (Rear Panel) In the Auto mode, the AMP Three will turn on automatically when an input signal is sensed. In the absence of an input signal, the AMP Three will shut down automatically. (In the Auto mode, the front panel power switch should always rem...
Amplifier Power Output . . . . . . . .150 watts per channel 400 watts monobridged Total Harmonic Distortion . . . . . . . . . . . . . . . . . .<0.04%Intermodulation Distortion . . . . . . . . . . . . . . . . . <0.04%Frequency Response . . . . . . . .20 Hz to 20K Hz, ±0.5 dBSignal to Noise Rati...
Read Instructions All the safety and operating instructions should be read beforethe appliance is operated. Retain Instructions The safety and operating instructions should be adhered to. Heed Warnings All warnings on the appliance and in the operating instructionsshould be adhered to. Follow Instru...
