Audio-Technica ATW-252 - Manual
Audio-Technica ATW-252 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Professional VH F Wireless Systems; Installation and Operation; Introduction
- Page 3 – Receiver Installation; Receiver Controls and Functions
- Page 4 – Transmitter Setup
- Page 6 – System Operating Frequencies
- Page 7 – Specifications
- Page 8 – Figure A; Antennas; Figure B; Figure C
- Page 9 – Transmitter Controls and Functions
200 Series Professional
VH F Wireless Systems
ATW-2 51
UniPak
®
Transmitter System
ATW-2 51/G
Guitar System
ATW-2 51/H
Headworn Microphone System
ATW-2 51/H92
Headworn Microphone System
ATW-2 51/H92-TH
Headworn Microphone System
ATW-2 51/L
Lavalier Microphone System
ATW-2 5 2
Handheld Microphone System
Installation and Operation
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Professional VH F Wireless Systems Installation and Operation 2 CAUTION! Electrical shock can result from removal of the receiver cover. Refer servicing to qualified servicepersonnel. No user-serviceable parts inside. Do notexpose to rain or moisture. The circuits inside the receiver and transmitter...
Receiver Installation 3 Location For best operation the receiver should be at least 3' (1 m)above the ground and at least 3' (1 m) away from a wall ormetal surface to minimize reflections. Keep the receiverantennas away from noise sources such as digital equipment,motors, automobiles and neon lights...
4 Transmitter Setup Battery Selection and Installation An alkaline 9-volt battery is recommended. Make certain the transmitter power switch is Off before installing or changingbatteries. When inserting the battery, observe correct polarity as marked inside the battery compartment. The transmitter ho...
