Audio-Technica ATW-1811 - Manuals

Page 2 - Notice to individuals; About RF Interference

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with INDUSTRY CANADA R.S.S. 210, en conformité avec IC: RSS -210 / CNR210. Operation is subject to the following conditions: 1) This de...

Page 3 - Receiver and Included Components / Accessories; Transmitters; System Configurations

1800 Series Components (single- channel) Receiver and Included Components / Accessories ATW- 1813 Camera-mount UHF WirelessMicrophone System (single-channel)with Body-pack and Plug-on Transmitters ATW-R1810 Single-channel receiver Two detachableantennas 18" output cable,TA3F to XLRM Pouch with b...

Page 4 - System Features

System Features (single-channel) • True Diversity operation for resistance to multi-path interference and dropouts • UHF reception with 996 frequencies selectable in 25 kHz steps • Automatic frequency scanning for easy selection of open channels • Tone Lock ™ squelch system eliminates interference w...

Page 5 - Quick Overview of System Operation; UHF Wireless Microphone System.; IF your system is equipped with a UniPak; IF your system is equipped with a Plug-on Transmitter:

Quick Overview of System Operation Thank you for purchasing this Audio -Technica 1800 Series Single-channel Camera-mount UHF Wireless Microphone System. All 1800 Series Single-channel systems are designed primarily to be used with video cameras, with the ATW-R1810 Receiver mounted on a camera and co...

Page 6 - ATW-R1810 Single-channel Receiver Controls

ATW-R1810 Single-channel Receiver Controls (front panel) Liquid Crystal Display shows battery status and frequency settings. BNC-type antenna connectors. Attach the antennas to the antenna input jacks. Make certainthat during operation there is a clear open-air path between the receiver antennas and...

Page 8 - ATW-R1810 Single-channel Receiver Batteries; Note: The ATW-R1810 receiver also functions without batteries

ATW-R1810 Single-channel Receiver Batteries Each ATW-R1810 Single-channel Receiver uses four 1.5V AA batteries, not included. Alkalinetype is recommended. Always replace all batteries. Make certain the receiver power is Offbefore replacing batteries. Note: The ATW-R1810 receiver also functions witho...

Page 9 - Operating the Receiver

Operating the Receiver NOTE: Transmitter-Receiver pairs must be set to identical frequencies. Overview…1. To turn the receiver on, press and hold the Power/Set button until the Power LED lights, and the LCD window comes on (about 2-3 seconds). The operating frequency will show in thewindow after the...

Page 10 - 802 Plug-on Transmitter Controls; Do not change the length of the transmitting antenna.

Antenna Power-on LED LCD Audio Input Jack Microphone Input Power/Mute Button Up/Down Arrows Set Button Sliding Control Cover (3-position) Sliding Control Cover Battery Door Mounting Clip ATW-T 1801 UniPak ® Body-pack & ATW-T 1802 Plug-on Transmitter Controls The ATW-T 1801 UniPak ® body-pack tra...

Page 11 - Transmitter Batteries; Operating theTransmitter; NOTE: Set your transmitter and receiver to identical frequencies.

11 Transmitter Batteries Each transmitter uses two 1.5V A A batteries, not included. Alkaline type is recommended.Always replace both batteries. Make certain the transmitter power is Off before replacing batteries. 1. Open the battery compartment door by sliding the catch down (on body-pack) or push...

Page 12 - Setting

Transmitter Functions RF Power Adjustments on your Transmitter Audio Input Level (Gain) Adjustments on your Transmitter Using the Mute and Un-Mute Functions on your Transmitter Power/Mute Locks Audio Input Selector (continued on page 13) 12 Function Menu Default Setting Choices (Edit) Wrap- around* ...

Page 13 - T ips for Best Results

13 Operating theTransmitter (continued) 1. A “PRESET” selection in the menu allows you to reset all transmitter functions to their factory- default values. 2. Press the Set button once to move to Menu mode.3. Press the Up arrow twice to move to “PRESET” in the LCD window.4. Press the Set button once...

Page 15 - Specifications

15 Overall System ATW-R1810 Single-channel Receiver ATW-T1801 UniPak ® Body-pack Transmitter ATW-T1802 Plug-on Transmitter Specifications † UHF Operating Frequencies Band C: 541.500 to 566.375 MHz Band D: 655.500 to 680.375 MHz Number of Operating Frequencies 996 total per band (25 kHz increments) F...