AT&T TL71208 - Manual

CID Press to display caller ID information. DIR Press to display directory entries. PHONE/FLASH Press to make or answer a call.During a call, press to receive an incoming call if call waiting is activated. MUTE/REMOVE During a call, press to mute microphone. While reviewing the caller ID history, pr...

Getting started Quick reference guide Feature menu Feature menu DIRECTORY CALL LOGRINGER VOLUMERINGER TONEKEY TONELANGUAGECLR VOICE MAIL Using menus Press or to scroll through menu items. Press MENU / SELECT to select or modify a highlighted item. Press OFF /CLEAR to cancel an operation, back up to ...

Avoid placing the telephone base too close to: • Communication devices such as: television sets, VCRs, or other cordless telephones. • Excessive heat sources.• Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. • Excessive dust sourc...

IMPORTANT INFORMATION Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com , or call 1 (800) 222-3111 . In Canada dial 1 (866) 288-4268 . 2. The power adapter is intended to be correctly oriented in a vertical or flo...

Getting started Battery installation & charging Install the battery as shown below. After installing the battery, you can make and receive short calls, but replace the handset in the telephone base or additional charger when not in use. For optimal performance, charge the handset battery for at ...

Getting started Battery installation & charging Charge the handset by placing the handset face up in the telephone base or in the additional charger. The CHARGE light will be on when charging. Step 4 IMPORTANT INFORMATION Use only the battery supplied with this product. To order a replacement or...

7 Getting started Adding and registering handsets Before using a new TL70008 handset, you must register it with the TL71108/TL71208/TL71308/TL72108/TL72208/TL72308/ TL71108/TL71208/TL71308/TL72108/TL72208/TL72308/ TL72408/TL78108/TL78208/TL78308/TL78408 telephone base (purchased separately). The TL7...

9 Getting started Replacing a handset You may need to de-register your handsets if: You have the maximum number of registered handsets (four) and need to replace a handset. -OR- You wish to change the designated handset number of your registered handsets.You must first de-register ALL the handsets, ...

10 Getting started Replacing a handset 4. To re-register the handset(s) to the telephone base, follow the registration instructions on page 8. NOTES: 1. If the de-registration process was not successful, you may need to reset the system and try again. To reset: pick up the handset and press the PHON...

Plug a 2.5 mm headset into the jack on the side of the handset. Lift the rubber flap here. For handsfree headset conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website at www.telephone...

Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com , or call 1 (800) 222–3111 . In Canada dial 1 (866) 288-4268 . 12 My phone doesn’t work at all. • Make sure the power cord is secur...

13 Appendix Troubleshooting • First try all the suggestions above.• Make sure you have a dial tone before dialing. The cordless handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. • Eliminate any background noise. ...

Appendix Troubleshooting 16 • If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone line, you must install a DSL filter between the telephone base and the telephone wall jack. The filter will prevent noise and caller ID problems caused by DSL interfer...

Appendix Troubleshooting 20 • Caller ID is a subscription service. You must subscribe to this service from your local telephone company for this feature to work on your phone. • If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone line, you must inst...

Appendix Troubleshooting 21 Common cure for electronic equipment. If the unit does not seem to be responding normally, try putting the cordless handset in its base. If it does not seem to respond, do the following (in the order listed):• Disconnect the power to the telephone base. • Disconnect the c...

22 Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment.Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid...

Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and ...

Appendix Important safety information Replace batteries only as described in your user’s manual. Do not burn or puncture batteries — they contain caustic chemicals. This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the ...

Appendix Important safety information Rechargeable batteries: This product contains either nickel- cadmium or nickel-metal hydride rechargeable batteries. Exer-cise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The batt...

Appendix Important safety information PACEMAKER PATIENTS Should keep wireless telephones at least six inches from the pacemaker.Should NOT place wireless telephones directly over the pace-maker, such as in a breast pocket, when it is turned ON.Should use the wireless telephone at the ear opposite th...

Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the forma...

29 Appendix FCC Part 68 and ACTA Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.The term ‘’IC:‘’ before the certifica...

Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residentia...

Appendix Limited warranty How long is the limited warranty period? The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty al...

Appendix Limited warranty PRODUCT returned without valid proof of purchase (see item 6 below); -or-Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service? To obtain warranty service in the United Sta...

Appendix Limited warranty Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this ...

Index Technical specifications 36 Channels 95 Operating temperature 32°F — 122°F 0°C — 50°C Telephone base voltage (AC voltage, 60Hz) 96 — 130 Vrms Telephone base voltage (AC adapter output) 9VDC @400mA Handset voltage 3.2 — 4.7 VDC 550mAh Charger voltage (AC adapter output) 9VDC @200mA Replacement ...