Page 2 - Congratulations; Important safety information; section
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 21-22 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to ins...
Page 3 - Parts checklist
Handset lifter lifter Parts checklist Check to make sure the handset lifter package includes the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Large lifter pad lifter pad pad Auxiliary ring detector Anti-slip pad User's manual User’s manu...
Page 4 - Getting started
User’s manual TL7100Handset lifter for use with AT&T models TL7610/TL7611 Table of contents Getting started Quick reference guide - handset lifter ................................................... 1Handset lifter installation .......................................................................
Page 5 - Handset lifter operation; Make and answer a call with a multi-line telephone and; Appendix
Handset lifter operation Make and answer calls ................................................................................ 14 Make a call with the corded handset ............................................... 14Make and answer a call with the handset lifter and cordless headset...................
Page 6 - Quick reference guide - handset lifter
1 Lifter control cable This cable is hard wired into the lifter and plugs into the LIFTER jack on the headset base via the TL7610/TL7611 base adapter. RING DETECT jack Plug in the auxiliary ring detector (page 11). ADJUST LIFTER knob Adjusts the height of the lifter arm (page 8). Lifter arm Holds th...
Page 7 - Small lifter pad; Adhesive tape; Internal ring detector
2 Small lifter pad Holds the earpiece of the corded telephone handset. Adhesive tape Remove the protective strips before attaching the lifter to the telephone base. STATUS light On in red when the ring detector is off (page 13). On in blue when the ring detector is on and the headset not in use (pag...
Page 8 - Handset lifter installation
Handset lifter installation Getting started The TL7100 lifter works with the TL7610/TL7611 DECT 6.0 cord-less headset by using the TL7610/TL7611 base adapter to pro-vide a complete communication solution for most corded tele-phones. The lifter raises and lowers its switch hook presser to answer, mak...
Page 9 - Installation preparation; Install the headset base as shown on page 5.
Handset lifter installation Getting started 4 Installation preparation Before installing the headset base, remove the rear bottom piece of the headset base by pushing it away from the base. Install the headset base as shown on page 5. After completing installation, slide the rear bottom piece toward...
Page 11 - LIFTER AUDIO ADJUST
Adjust the corded handset audio 1. Make sure that LIFTER MODE light on the headset base is on. Press the MODE button on the headset base to change the mode. 2. Lift the corded handset to release the switch hook. Place the corded handset aside. 3. Place the headset earpiece (AT&T model TL7610/ TL...
Page 12 - Attach the lifter; To choose where to install the lifter
Attach the lifter 1. To choose where to install the lifter on your telephone, look at the space underneath the corded handset. If there is a speaker, the lifter should be centered over the speaker. If there is no speaker, the lifter should be centered within the space. Make sure the lifter arm is ra...
Page 13 - Adjust the height of the lifter arm; Turn the; ADJUST LIFTER; knob to change the height of the lifter; Adjust the switch hook presser position
Handset lifter installation Getting started 8 Adjust the height of the lifter arm Turn the ADJUST LIFTER knob to change the height of the lifter arm. When in the raised position, the arm should release the switch hook so you can hear a dial tone. When lowered, the arm should hold the switch hook dow...
Page 15 - Installation of large lifter pad (optional); Hold the large lifter pad in front of the small lifter pad as
10 Handset lifter installation Getting started Installation of large lifter pad (optional) If the small lifter pad cannot hold the corded handset steadily, you can attach a large lifter pad (provided) to enlarge the contact area. 1. Hold the large lifter pad in front of the small lifter pad as shown...
Page 16 - Install the auxiliary ring detector; Insert the auxiliary ring detector plug into the; Remove the protective strip from the adhesive tape on the; About internal and auxiliary ring detectors
11 Install the auxiliary ring detector 1. Insert the auxiliary ring detector plug into the RING DETECT jack on the lifter. 2. Remove the protective strip from the adhesive tape on the auxiliary ring detector. 3. Stick the auxiliary ring detector to the center of the corded phone speaker. The interna...
Page 18 - STATUS light; Red; jack on the headset base via the TL7610/
STATUS light 13 About internal and auxiliary ring detectors Getting started Red On when the headset is not in use and the ring detector is turned off. Flashes slowly when the headset is in use and the ring detector is turned off. • • Blue On when the headset is not in use and the ring detector is tu...
Page 19 - Make a call with the corded handset; Make and answer calls
14 Make a call with the corded handset As indicated below, lifting the handset causes the lifter arm to rise and release the switch hook. When you hear a dial tone through the handset, you can dial normally using the dial pad. Released switch hook Make and answer calls Handset lifter operation
Page 20 - Dial the telephone number using; on the headset to answer an; on the headset to end a call. The
15 Make and answer a call with the handset lifter and cordless headset You can use the cordless headset to make, answer and end calls without using the corded handset. Make a call: 1. Press ON/ OFF on the headset. The switch hook presser rises and releases the switch hook. You hear a dial tone in th...
Page 22 - Troubleshooting
17 If you have difficulty with your handset lifter, please try the suggestions below. For customer service, visit our website at www.telephones.att.com , or call 1 (800) 222–3111 . In Canada, dial 1 (866) 288-4268 . Troubleshooting Appendix The switch hook presser doesn’t rise at all. • Make sure th...
Page 25 - Maintenance
20 Taking care of your handset lifter Your lifter contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment.Place the lifter down gently. Save the original packing materials to protect your lifter if you ever need to ship them. Avoid water Your lifter can be dama...
Page 26 - Safety information; Read and understand all instructions in the user’s manual.; There may; Do not use this product near water, or when you are wet.
This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and understand all instructions in the use...
Page 27 - Install this product in a protected location; where no one can; Limited warranty
22 Important safety information Appendix Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. If this product does not operate normally, see the Troubleshooting section on pages 17-19 of this user’s manual. If you can...
Page 29 - or call; What does this limited warranty cover?
Limited warranty Appendix The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111 . In Canada, call 1 (866) 288-4268 . 1....
Page 30 - How long is the limited warranty period?; This limited warranty does not cover:
25 Limited warranty Appendix 3. How long is the limited warranty period? The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warra...
Page 31 - What must you return with the PRODUCT to get warranty
26 PRODUCT returned without a valid proof of purchase (see item 6 below); -or-Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 5. How do you get warranty service? To obtain warranty service in the United States of America, vi...
Page 32 - This warranty is the complete and exclusive agreement between; Please retain your original sales receipt as proof of purchase.
27 Limited warranty Appendix Include a “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; andProvide your name, complete and correct mailing address, and telephone number. 7. Other limitations This warranty is the complete...
Page 33 - Index
28 Index Index A Adjust corded handset audio 6height of the lifter arm 8sensitivity level 12switch hook presser position 8 Answer a call 15 , 16 Anti-slip pad 10Attach lifter 7Auxiliary ring detector installation 11sensitivity adjust 12 B Base adapter 5 C Corded handset audio adjust switch 6 D Dial ...
