Page 3 - Contents
3 Contents Notice for Installers .......................................................................................................... 4 IMPORTANT SAFETY INSTRUCTIONS.............................................................................. 4 Change the Way You Watch TV .......................
Page 4 - IMPORTANT SAFETY INSTRUCTIONS
4 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) D o n o t b l o c k a n y v e n t i l a t i o n o p e n i n g s . I n s t a l l i n accordance with the manufacturer’s...
Page 5 - Eliminate AC Power/Mains Overloads; Operating Environment; Service Warnings; Check Product Safety; IMPORTANT SAFETY INSTRUCTIONS,; continued
5 Verify the Power Source from the On/Off Power Light When the on/off power light is not illuminated, the apparatus may still be connected to the power source. The light may go out when the apparatus is turned off , regardless of whether it is still plugged into an AC power source. Eliminate AC Powe...
Page 8 - Front Panel
8 Front Panel 1 Power Turns the receiver on or places it in standby. To restart the receiver, press and hold the POWER button for 10 seconds. The LED is green 2 Model Number Identifi es the model number of your receiver as ISB7005 3 Signal Strength Identifi es the strength of the wireless connection...
Page 9 - Back Panel
9 Back Panel 1 To TV (Video Out) Connect to TV. You must set the channel on your TV to the channel designated by your service provider (usually channel 3). Contact your service provider for the channel information 2 Network Connect to the Ethernet (CAT-5) network at your home, if applicable 3 YPbPr ...
Page 10 - Connecting the Receiver; Home Theater; or
10 Because the connections for a high-defi nition (HD) or standard-defi nition (SD) TV are diff erent, you must determine if your TV is HD or SD. Your TV must receive HD signals for you to enjoy the benefi ts of HDTV. Refer to the manual that came with your TV for more information. See page 27 for m...
Page 11 - Receiver Operational Status; Signal Strength Indicator
11 ISB7005 Wireless NetworkConnection The ISB7005 receiver allows for easy and secure connection to U-verse services. The signal strength indicator on the front panel of the receiver identifi es the strength of the wireless connection and aids in the proper placement of the receiver. • You cannot ch...
Page 12 - Ethernet Port; Pairing the Wireless Access Point and Receiver; OK
12 Connecting the Wireless Access Point to the Wireless Gateway 1. Connect the 12 VDC Power Supply plug on the access point to the wall power outlet. Use only the power adapter provided with the product. 2. Connect the power plug to the power receptacle on the wireless access point. 3. Connect one e...
Page 13 - Adapter Needed
13 Connections for a High-Defi nition TV (HDTV) To use the receiver with an HDTV, you must make one of the following connections to view the HD content. Refer to the owner’s manual for your TV and the cabling diagrams in this manual for more detailed connection information. Although all connections ...
Page 15 - Connections for a VCR or DVD Recorder; Connections
15 Connections for a VCR or DVD Recorder When using the receiver with a VCR or DVD recorder, you must make one of the following connections to view content. Although all connections provide you with quality service, we list the connections in our recommended order. Notes: • The labeling on your rece...
Page 16 - Connecting to an HDTV with an HDMI Connector; Cable Used in this Confi guration; Receiver
16 Connecting to an HDTV with an HDMI Connector Cable Used in this Confi guration • 1 HDMI Cable Notes: • The HDMI port on the TV must support high-bandwidth digital content protection (HDCP). • The HDMI interface supports Dolby ™ Digital 5.1 audio. WARNING: Electric shock hazard! Unplug all electro...
Page 17 - Connecting to an HDTV with a DVI Connector; Cables Used in this Confi guration; Back of HDTV; OR
17 Connecting to an HDTV with a DVI Connector Cables Used in this Confi guration • 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter • 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram,...
Page 18 - Back of
18 Connecting to an HDTV with Component (YPbPr) Connectors Cables Used in this Confi guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram, dependent upon y...
Page 19 - Back of SDTV
19 Connecting to an SDTV with Component (YPbPr) Connectors Cables Used in this Confi guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable Note: The receiver must be set to the proper standard-defi nition mode. WARNING: Electric shock hazard! Unplug all electronic devices before conn...
Page 20 - Connecting to an SDTV with an S-Video Connector
20 Connecting to an SDTV with an S-Video Connector Cables Used in this Confi guration • 1 S-Video Cable • 1 Audio Left/Right Cable WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the receiver. Receiver Pr Pb Y TO TV (VIDEO OUT) S-...
Page 21 - Connecting to an SDTV with an RCA-Type Connector
21 Connecting to an SDTV with an RCA-Type Connector Cables Used in this Confi guration • 1 RCA-type Video Cable • 1 Audio Left/Right Cable WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the receiver. Receiver T14828 Pr Pb Y TO TV...
Page 22 - Connecting to an SDTV with a Coaxial Cable; Coaxial
22 Connecting to an SDTV with a Coaxial Cable Cable Used in this Confi guration • 1 Coaxial Cable Note: You must set the channel on your TV to the channel designated by your service provider (usually channel 3). Contact your service provider for the channel information. WARNING: Electric shock hazar...
Page 24 - Connecting to a Stereo VCR or DVD Recorder (optional)
24 Connecting to a Stereo VCR or DVD Recorder (optional) The diagram below shows how to connect a recording device to your receiver. Although it is possible to watch TV using a connection through your VCR or DVD recorder to the TV, this connection may not provide the best picture, and HDTV users are...
Page 25 - Troubleshooting; No Picture
25 Troubleshooting If the receiver does not perform as expected, the following tips may help. If you need further assistance, contact your service provider. No Picture • Verify that the power to your TV is turned on. • Verify that your wireless receiver and wireless access point are powered on. • Ve...
Page 26 - Frequently Asked Questions; What Is Digital Television?; What Is HDMI and Does it Support Dolby Digital 5.1 Audio?
26 Frequently Asked Questions What Is Digital Television? Digital television (DTV) is a huge leap forward in television technology compared to analog television that has been widely available since the 1940s. DTV is delivered and displayed using digital encoding, similar to the way a PC operates. By...
Page 27 - Picture Formats; What Is Aspect Ratio?; progressive scanning; interlaced method
27 Picture Formats What Is the Diff erence Between a Standard-Screen and aWide-Screen HDTV? The type of screen your HDTV has (wide-screen or standard-screen) determines how the receiver displays programs on the screen. The picture format for an HDTV is a combination of aspect ratio and screen resolu...
Page 28 - Index
28 A AC Power input 9 Arrow keys 8 Aspect ratio 27 Audio Out 9, 13, 14, 15 B Back panel 9 Burn-in of screen 25 Buttons See Front Panel C Cables 9, 10, 12, 16-24 CAT-5 See Ethernet Coaxial Cable Input 22 Compliance, FCC 30 Component video connection. See YPbPr Connectors See also Front panel; Back pa...
Page 30 - Compliance Information
30 United States FCC Compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment gener...
Page 31 - Federal Communication Commission Interference Statement; Industry Canada Statement:
31 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential i...
