AT&T Generic 3 - Manual
AT&T Generic 3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Press softkey below Prog (if shown on the display); to add special functions such as Pause, Mark,
- Page 8 – SEND ALL CALLS; SPEAKERPHONE
- Page 9 – TEST
- Page 10 – To see elapsed time; ] and then the softkey; below Timer; TRANSFER; To send present call to another extension or; Dial number where call is to be transferred.
AT&T
DEFINITY® Communications System
Generic 1 and Generic 3 and System 75
8434 Voice Terminal
Quick Reference Guide
AT&T 555-230-766
Comcode 107177016
Refer to the procedures on this card to use the
features on your 8434 voice terminal. The features
here are listed in alphabetical order. In the spaces
provided, write the feature access codes for your
system. For more information about any of these
features, see your system manager or refer to the
DEFINITY® Generic 1 and Generic 3 and System 75
8434 Voice Terminal User’s Guide, 555-230-765.
USING THE SOFTKEYS
You can display any of the softkey features by
pressing [
Menu
]. If the feature you want to use is not
on the bottom line of the screen, press [
Next
→
→
] or
[
←
←
Prev
] until you see the feature you wish to access.
To use the feature, press the softkey below the feature
abbreviation. When the feature is active, an arrow
appears above the feature name. (However, if the
feature requires you to dial a telephone number or
extension, such as Call Forwarding, you will
temporarily see the digits you are dialing, rather than
the arrow, above the feature name.)
ABBREVIATED DIALING (AD)
To program or reprogram an AD button
1
Pick up handset.
NOTE: For speakerphone users, press a call
appearance button or press [
Speaker
].
2
Press softkey below Prog (if shown on the display)
or Press [
P r o g r a m
]
or Dial AD Program access code
.
3
Press AD button to be programmed.
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 5 6 7 Dial outside number, extension, or feature access code you want to store (up to 24 digits). NOTE: You may be able to use the softkeys to add special functions such as Pause, Mark, Wait, or Suppress into the telephone numbers programmedon the AD button. Press [ # ]. Repeat Steps 3 through 5 t...
To adjust ringer volume if necessary (speaker is not active) 1 To raise the volume, press the right half of the Volume control button labeled [ ∧ ∧ ]; to lower the volume, press the left half of the Volume control button labeled [ ∨ ∨ ]. SEND ALL CALLS To send all calls (except priority calls) immed...
To change from speakerphone to handset 1 Pick up handset and talk. To change from handset to speakerphone 1 Press [ Speaker ]. 2 Hang up handset. To end a speakerphone call 1 Press [ Speaker ] again to hang up. STORED NUMBER (display feature) To see number stored on an AD button 1 Press the softkey ...
