AT&T EL51100 - Manual - manualsarea.com

Page 2 - Introduction; Please refer to the complete on-line; with caller ID/call waiting; user’s manual for a full set of installation and operation; Important safety information; of this quick start guide.; Table of contents

Introduction This quick start guide provides you with basic installation and use instructions. A limited set of features are described in abbreviated form. Please refer to the complete on-line EL51100 DECT 6.0 cordless telephone with caller ID/call waiting user’s manual for a full set of installatio...

Page 3 - Parts checklist

2 Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Battery for cordless handset Battery compartment cover Telephone line cord Quick start guide Power adapter for telephone base Telephone ba...

Page 4 - Installation; Wall mount installation; in the on-line user’s manual; IMPORTANT INFORMATION:; at

3 Installation Install the telephone base as shown below. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter on the DSL line. If you want to mount your telephone on a wall, use the included wall mount bracket and...

Page 5 - Battery installation; Install the battery as shown below.; visit our website at; light is on; THIS SIDE; facing up as indicated.; CHARGE; light

4 Battery installation Install the battery as shown below. IMPORTANT INFORMATION: Use only the supplied rechargeable battery or replacement battery (model BT66342). To order, visit our website at www.telephones.att.com , or call 1 (866) 288-4268 . To replace the battery, press the tab and slide the ...

Page 6 - Battery charging; LOW BATTERY; until you have charged the

5 Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base to charge the battery. For best performance, keep the handset in the telephone base when not in use. The battery is fully charg...

Page 7 - Handset overview; MUTE

6 Handset overview REDIAL/PAUSE Press repeatedly to view the last 20 numbers dialed.While entering numbers, press and hold to insert a dialing pause. PHONE/FLASH Press to make or answer a call.During a call, press to answer an incoming call when you receive a call waiting alert. 1 While reviewing a ...

Page 8 - Telephone base overview; HANDSET LOCATOR; Press to make the handset beep so you can locate it.

7 Telephone base overview HANDSET LOCATOR Press to make the handset beep so you can locate it.

Page 10 - Telephone settings; Menu structure; Ringer volume; AM

9 Telephone settings Use Menu structure on page 8 to find and set features. Many are simple yes/no questions. The following are a few examples of common features to set. Refer to Handset settings in the on-line user’s manual for detailed instructions on setting all telephone features. Ringer volume ...

Page 12 - To search by name; Redial; SPEAKER

Options while on a call Volume control While on a call, press DIR /VOLUME to increase or press CID /VOLUME to decrease the listening volume. NOTE: The handset earpiece volume setting (-5) and speakerphone volume setting (-6) are independent. Changing one does not affect the other. Chain dialing Whil...

Page 13 - Handset locator; FLASH; Voicemail waiting (visual message waiting) indicator; NEW VOICEMAIL

2 Handset locator Use the handset locator to find the misplaced handset. To start the paging tone: Press HANDSET LOCATOR at the telephone base to start the paging tone on the handset for 60 seconds. To stop the paging tone: Press PHONE/ FLASH , SPEAKER or any dial pad key (0-9, , or #) on the handse...

Page 14 - Create directory storage; To review directory entries; If the telephone number in the directory exceeds 5 digits,

3 Directory Directory overview The directory is stored in the telephone base. It stores up to 00 entries. Storing names and numbers You can add new entries to the directory whenever a telephone number shows on the screen (predial or from caller ID history) by pressing MENU/ SELECT then going to step...

Page 16 - Caller ID overview; XX MISSED CALLS; To review the caller ID history; To delete entries from the caller ID history; DELETE; To store a caller ID entry in the directory; EDIT NUMBER

5 Caller ID overview This product supports caller ID services offered by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring. Caller ID history (call log) The caller ID ...

Page 17 - Troubleshooting; on page 5 for details.

6 Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com , or call 1 (866) 288-4268 . When you call customer service, you will need the serial num...

Page 20 - I hear other calls while using my telephone.

9 Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while the person is speaking. If background noise ca...

Page 22 - SAVE THESE INSTRUCTIONS

2 Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted . Potential TV...

Page 23 - FCC Part 68 and ACTA; Industry Canada

22 FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:A...

Page 24 - This Class B digital apparatus complies with Canadian ICES-003.

23 The Ringer Equivalence Number (REN) for this terminal equipment is 0.B. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the su...

Page 25 - Limited warranty; or call; What does this limited warranty cover?; This limited warranty does not cover:

24 Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.com or call 1 (866) 288-4268 . What does this limited warranty cover? The manufacturer of this AT&a...

Page 26 - How do you get warranty service?; To obtain warranty service in Canada, visit; What must you return with the PRODUCT to get warranty service?

25 PRODUCT returned without a valid proof of purchase (see item 6 below); orCharges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service? To obtain warranty service in Canada, visit www.telephones.att.com ...

Page 27 - Technical specifications; RF frequency band

26 Technical specifications RF frequency band 92.536MHz – 928.448MHz Channels 5 Operating temperature 32°F – 22°F 0°C – 50°C Telephone base voltage (AC voltage, 60Hz) 96 – 30Vrms Telephone base voltage (DC adapter output) AC6V @300mA Handset voltage DC2.4 – 3.2V Operating times* Talk time (handset):...

AT&T EL51100 - Manual

Table of Contents:

Summary

Other AT&T Models