AT&T E2115 - Manual

3 Getting Started Quick reference guide Telephone Base IN USE On when handset is in use. Flasheswhen another phone is in use on thesame line. CHARGING On when handset batteries arecharging. NEW MESSAGE Flashes when you have new voicemail (requires voice mail servicefrom your local telephone company)...

4 Getting Started Parts checklist Remember to save your sales receipt and original packaging in case you ever need toship your telephone for warranty service. Check to make sure the telephone packageincludes the following: Telephone base Poweradapter Belt clip Battery Long telephone line cord Teleph...

5 Getting Started Before you begin About Caller Identification Caller ID with Call Waiting features inthis telephone let you see who’s callingbefore you answer the phone, evenwhen you’re on another call. Thesefeatures require services provided byyour local telephone company.Contact your telephone se...

NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222–3111. Be sure to use an electrical outlet not controlled by a wall switch. 6 Getting Started Telephone base installation Install the telephone base as shown below. Choose a base location away from ele...

7 Getting Started Battery installation & charging After installation, place the handset in the base and allow to charge for 15 hours beforeuse. You can keep batteries charged by returning the handset to the base after each use.When batteries are fully depleted, a recharge takes about 10 hours. I...

8 Getting Started Wall mounting The telephone base can be installed on any standard wall-phone outlet as shown below.Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Plug base power cord tr...

9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired.For hands-free telephone conversations, you can use any industry standard 2.5 mmheadset (purchased separately). For best results use an AT&T 2.5 mm headset. Snap belt clip into notches onside of handse...

10 Telephone Operation Basic operation Making and answering calls To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER , then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first,then press PHONE or S...

11 Telephone Operation Options while on calls Volume control Press VOLUME buttons on the side of the handset to adjust listening volume. Each button press raises orlowers volume by one level.When you change the volume level, the new settingbecomes the default. The new volume level will beapplied eac...

12 Telephone Operation Handset locator If you misplace the handset, press HANDSET LOCATOR at the base. The handset will beep for 60 seconds tohelp you locate it. To stop the beeping, press PHONE, SPEAKER, or any dial pad button at the handset, or press HANDSET LOCATOR at the base. 91-5622-20-00_E211...

13 Telephone Operation Handset settings At the feature menu you can change settings to customize how the telephone works. Press MENU , then use the ^V buttons to scroll to the feature you want to change. As you scroll throughthe menu, the top menu item is always highlighted witha > character. Pre...

14 Telephone Operation Handset settings Handset name At this menu you can customize the name that appearson the handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (seepage 16 to enter letters). Press SELECT...

15 Phonebook Memory capacity The phonebook directory can store up to 50 entries.Each entry can contain a number up to 32 digits, and aname up to 16 letters long. A convenient search featurecan help you find and dial numbers quickly (see page 17). Timeouts and error messages If you pause for too long...

16 Phonebook New phonebook entries To create a new phonebook entry Press MENU twice to select DIRECTORY . Press V to highlight STORE . Press SELECT , then enter the telephone number when prompted. Use the dial pad to enter up to 32 digits, then press SELECT. You will be notified if the number is alr...

17 Phonebook Phonebook search Press DIR to display the first listing in the phonebook. You can then use the up/down arrows to browsethrough the phonebook, or search to find a specificentry. Press OFF at any time to exit the directory. To browse through the directory To browse, press ^ or V to scroll...

18 Phonebook To dial, change or delete entries To dial a number When any phonebook entry is displayed, press PHONE (or SPEAKER ) to dial the displayed number. To delete an entry When any phonebook entry is displayed, press DELETE to delete the displayed entry from the phonebook.Once deleted, an entr...

19 Caller ID Logs How Caller ID works If you subscribe to Caller ID service provided by yourlocal phone company, information about each caller willbe displayed after the first ring. Information about the last 50 incoming calls is stored inyour call log. You can review the call log to find outwho has...

20 Caller ID Logs To review your call log To review your call log Press CID to review your call log. The most recent call is displayed first. Use the arrow buttons to scrollthrough the list as shown at left. To return a call Press PHONE (or SPEAKER ) to call the number as displayed. To change the nu...

21 Appendix Screen icons, indicator lights & tones Handset screen icons & alert tones Speakerphone in use. Ringer off. Battery charging (animated display). Low battery (flashing); place handset in base to recharge. MUTE Microphone is muted. NEW New calls (press CID to review call log). Happy...

22 Appendix In case of difficulty If you have difficulty with your phone, please try the suggestions below. For CustomerService, visit our web site at www.telephones.att.com , or call 1-800-222–3111. Telephone doesnot work at all • Make sure batteries are installed and charged correctly (see page 7)...

23 Appendix Technical specifications RF Frequency Band(Handset to Base) 2401.056 MHz — 2482.272 MHz Output Power 20 dBm Sensitivity -96 dBm Modulation GFSK RF Frequency Band(Base to Handset) 2401.056 MHz — 2482.272 MHz Channels 95 Channel Spacing 864 KHz Operating Temperature 32°F — 122°F0°C — 50°C ...

24 Appendix A AC adapter, 6, 8 Alert tones, 21 Answering calls, 10 B Battery charging, 7 Battery installation, 7 Belt clip, 9 C Call logs, 19 Caller ID, 19 add entries to phone directory, 20 delete entries, 20 dial entries, 20 CID, 21 D Delete Call Log entries, 20 Delete redial entries, 10 Dialing, ...