Page 2 - Congratulations; Important safety information; on
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 20-22 of this manual. For complete instructions, please refer to the manual provided with your CL81100/CL81200/CL81300/CL82100/CL82200/CL82250/CL82300/...
Page 3 - Parts checklist
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Battery for cordless handset Cordless handset Charger for cordless handset with power adapter installed Battery compartment cover User's man...
Page 4 - Table of contents; Getting started
User’s manual CL80100DECT 6.0 expansion handsetfor use with AT&T modelsCL81100/CL81200/CL81300/CL82100/CL82200/CL82250/CL82300/CL82350/CL82400/CL82500/CL82550/CL84100/CL84200/CL84300 Table of contents Getting started Quick reference guide - handset ..................................................
Page 5 - Quick reference guide - handset; CHARGE indicator; SPEA�ER; TONE
Quick reference guide - handset CHARGE indicator On when the handset is charging in the telephone base or charger. q CID/-VOLUME Press q CID to show caller ID history. Press to scroll down while in menus. While entering names or numbers, press to move the cursor to the left.Press to decrease the lis...
Page 6 - INT
Quick reference guide - handset Getting started p DIR/+VOLUME Press p DIR to show directory entries. Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press to increase the listening volume when on a call. OFF/CLEAR OFF/CLEAR During a call, pr...
Page 7 - Main menu; Play messages; EQ
Quick reference guide - handset Getting started Main menu The > symbol highlights a menu item. >Play messages Answering sys Main menu Play messagesAnswering sysDirectoryCall log RingersSettingsWebsite Using menus Press MENU/ SELECT to show the first menu item, Play messages . Press q CID or p ...
Page 8 - Installation; or call; Avoid placing the telephone base too close to:
4 See pages 6-7for easy instructions. You must install and charge the battery before using the telephone. STOP! Installation Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use.For customer service or product information, visit ...
Page 9 - IMPORTANT INFORMATION; Charger installation; Install the charger as shown below.
IMPORTANT INFORMATION 1. Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . 2. The power adapters are intended to be correctly oriented in a vertical...
Page 10 - Battery installation and charging; Install the battery as shown on page 7.; Low battery; , you need to charge the handset
6 Battery installation and charging Install the battery as shown on page 7. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset i...
Page 11 - THIS SIDE UP; facing up; light on the top; CHARGE; light; To order, visit our website at
Battery installation and charging Getting started 7 Step 1 Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Step 2 Align the cover flat against t...
Page 12 - Adding and registering handsets
Adding and registering handsets Before using a new CL80100 handset, you must register it with the AT&T CL81100/CL81200/CL81300/CL82100/CL82200/CL82250/CL82300/CL82350/CL82400/CL82500/CL82550/CL84100/CL84200/CL84300 telephone system (purchased separately), the telephone system can accommodate up ...
Page 14 - Deregistering a handset
Deregistering a handset You can deregister handsets. You may need to deregister your handsets if:You have 12 registered handsets and need to replace a handset. -OR- You wish to change the designated handset number of your registered handsets.You must first deregister ALL the handsets, and then re-re...
Page 15 - Troubleshooting
Troubleshooting If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . The handset registration is unsuccessful. Follow the handset registration instruct...
Page 16 - My cordless handset isn’t performing normally.
Troubleshooting Appendix 12 If the previous suggestions do not work, disconnect the telephone base from the telephone jack and connect to a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service. Contact your telephone service provider.Your lin...
Page 17 - , refer to the table
Troubleshooting Appendix Out of range OR No pwr at base appears on my cordless handset. Ensure you plug the telephone base in properly and the power is on.Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize.Move the cordless handset c...
Page 18 - I experience poor sound quality when using the speakerphone.
I get noise, static, or weak signals even when I’m near the telephone base. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack. The filter prevents noise an...
Page 19 - My cordless handset does not ring when I receive a call.; Make sure that the ringer is not off. Refer to; Ringer volume
My cordless handset does not ring when I receive a call. Make sure that the ringer is not off. Refer to Ringer volume in the user’s manual provided with your CL81100/CL81200/CL81300/CL82100/CL82200/CL82300/CL82350/CL82400/CL82500/CL84100/CL84200/CL84300 telephone. Make sure you plug in the telephone...
Page 20 - My calls cut in and out while I’m using my cordless handset.
Troubleshooting Appendix My calls cut in and out while I’m using my cordless handset. Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from the following electronic devices as possible: television sets, VCRs, or other cordless telephone...
Page 21 - System does not receive caller ID when on a call.
17 Troubleshooting Appendix System does not receive caller ID when on a call. Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features works only if both you and the caller are in areas offering caller ID service, and if both telephone ...
Page 22 - The charge light is off or blinking.; light is an indication that the battery is not; Common cure for electronic equipment.
Troubleshooting Appendix The charge light is off or blinking. Make sure you plug the power and line cords in correctly and securely.Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Clean the cordless h...
Page 23 - Maintenance; Taking care of your telephone
Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so you must treat it with care.Avoid rough treatment. Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water You c...
Page 26 - SAVE THESE INSTRUCTIONS
22 Pacemaker patients Should keep wireless telephones at least six inches from the pacemaker.Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.Should use the wireless telephone at the ear opposite the pacemaker.WTR’s evaluation did not...
Page 27 - FCC Part 68 and ACTA
Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the forma...
Page 32 - Please retain your original sales receipt as proof of purchase.
Appendix 28 Limited warranty 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for...
Page 33 - Technical specifications
Operation Operating time* Talk time (cordless handset) Up to seven hours Talk time (cordless handset speakerphone) Up to five hours Standby Up to seven days * Operating times varies depending on your actual use and the age of the battery. DECT 6.0 digital technology The AT&T DECT 6.0 products of...
